The best Daystar product here for a Crosstrek owner is its only entry: the Daystar 2in Suspension Lift Kit KS09102BK for the 2018-2019 Subaru Crosstrek 4WD. It raises the car two inches for more clearance and larger-tire room, using polyurethane spacers rather than new struts. It is the Daystar answer for a Crosstrek that scrapes on trails, snow or steep driveways.
A spacer lift sits at the top of the existing suspension and pushes the body higher, so clearance improves without changing the factory struts and springs. Dealer listings describe polyurethane front and rear spacers, a no-drill, bolt-on fit with no strut disassembly, and clearance for 29-inch tires on stock wheels. Because the factory parts stay, ride character stays close to stock, the appeal for a daily Crosstrek that also sees dirt.
Browse Suspension range, Shocks and Struts and Control Arms and read enhancing Subaru off-roading capabilities before ordering tires to match.
Brands to know
Daystar is carried here through this single kit, and its lane is lift hardware: polyurethane coil spacers that add height without metal-on-metal contact, corrosion or squeaks, as dealer descriptions put it. Those listings sell it with a lifetime warranty, pitched at owners who want clearance and tire room while keeping factory ride and stability systems.
LP Aventure is the Subaru adventure specialist in this store, carried for skid plates, bumper guards, hood light brackets and lift-related parts for Crosstrek, WRX and other Subaru models named in its listings. Where Daystar answers only the height question, LP Aventure is where a Crosstrek build goes next for underbody protection. Pair a lift with a skid plate before rocky trails, not after.
Whiteline covers the handling hardware around a lift, carried here for sway bars, end links, control arms and bushings across the Subaru range. A lifted car still needs its alignment and body control sorted, and Whiteline is the cross-shop for those parts. Its range suits owners who want the taller Crosstrek to steer as tidily as it did at stock height.
SuperPro is the polyurethane bushing shelf in this store, carried for suspension bushings and alignment-related parts that replace tired rubber. On an older Crosstrek, fresh bushings are the natural partner to a spacer lift, since worn rubber lets a lifted car wander. Check your year and model on each bushing kit, as fitments split by generation.
FAQ
Which Crosstrek does this Daystar kit fit?
The title states 2018-2019 Subaru Crosstrek 4WD, part KS09102BK. Some dealer listings describe a wider range for the same part number, so check your year and model against the listing before ordering.
How much lift does it give, and what tires fit?
Dealer listings describe a 2-inch lift clearing 29-inch tires on stock wheels, with larger tires needing trimming. Budget for an alignment afterwards.
Does installation require drilling or strut disassembly?
Dealer descriptions say no: bolt-on top-load spacers and strut stud extenders, with no drilling and no strut disassembly. It is still suspension work, so a shop install and post-install alignment are sensible for most owners.
Will the lift change how my Crosstrek rides?
The design keeps the factory struts, springs and stability controls, so ride stays close to stock apart from the higher seating position. Inspect worn dampers or bushings while the suspension is apart.
