V1 V2 V3 Headlight / Front Sidemarker Overlays

Name: StickerFab [22-26 WRX] V1 V2 V3 Headlight / Front Sidemarker Overlays
Brand: StickerFab
SKU: 22WRXHL2-DS1
Price: 9.99 USD

Fits: 22-26 WRX

Color

Dark Smoke Light Smoke Black Dark Smoke Stealth Chameleon

Set

V1 Side V2 Side and Top V3 Side (Limited)

$999

Earn $0.19 In JDMuscle Rewards!

Talk to an Enthusiast

Verify Fitment & Product Recommendations

M-F 9:00AM - 6:00PM

(866) 833-3536 Email Text (610) 735-6688Text

Pay over time available · View all options

View all options

Pay over time available · View all options

View all options

StickerFab V1 V2 V3 Headlight / Front Sidemarker Overlays

Fits: 22-26 WRX

Fitment

Please Note: Fits 2022-2026 Subaru WRX. V1, V2 and V3 headlight and front sidemarker overlays. Three versions for different looks: V1 covers a large portion of the side of the headlamp; V2 covers the same large portion plus the top; V3 covers a smaller area.

2022-2026 Subaru | WRX

Description

Three versions for different looks
V1 covers a large portion of the side of the headlamp
V2 covers the same large portion of the headlight + the top
V3 covers a smaller area of the side (good for Limited and still looks great on Base + Premium

2022+ WRX Headlight / Front Sidemarker Overlays

Sidemarker overlays and eyebrows are pretty popular aesthetic mods for a vehicle. These knock out some of the bright orange in the headlights and wraps around the top of your headlight to visually change it up.

V1 - partial cover, only covers side

V2 - covers side and top

V3- partial cover, only covers side (smaller than V1, appropriate for Limited headlights and still looks great on normal headlights)

NOTE: On Limited models the V1 appearance will look different due to their internal design.

AVAILABLE MATERIALS

Dark Smoke - Standard dark smoke material. Made in Germany.
Light Smoke - Standard light smoke material. Made in Germany.
Black - Supercast film that will only let a small amount of light through when backlit.
Dark Smoke Stealth - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles). Made in the USA.

INSTRUCTIONS

Desired temperature for work environment: 70-85 degrees,

Clean the application and surrounding areas prior to applying. We recommend the following items for installation:

Microfiber
Detailing Spray or glass cleaner
Soapy Water (StickerFab Application Fluid recommended)
Squeegee (soft edge)
Heat Gun or Hair Dryer

Make sure there is no wax on the lens. You can wet the back of the vinyl with a few drops of dish soap in a cup of water. This allows you to slide the vinyl around into the right position. Once you have found that position, use your fingers to push out the soapy water. Allow to dry. LOW heat can be used to dry out the vinyl quicker.