Midpipe
Fits: 19-25 Ascent
Talk to an Enthusiast
Verify Fitment & Product Recommendations
M-F 9:00AM - 6:00PM
Pick Up Available at
Pay over time · Est. $27.91/payment ⓘ
Illustrative estimate only, not a financing quote or guaranteed offer. Actual payments, frequency and terms vary by provider and eligibility. Taxes, shipping and add-ons are excluded. View all options
Pay over time · Est. $27.91/payment ⓘ
Illustrative estimate only, not a financing quote or guaranteed offer. Actual payments, frequency and terms vary by provider and eligibility. Taxes, shipping and add-ons are excluded. View all options
Fitment
Fitment
- 2019-2025 Subaru | Ascent
Description
Description
Our 2019+ Subaru Ascent Midpipe features a 3" primary circuit with a unique Y section that ensures optimal flow transition from the main 3" circuit into our 2" rear circuit axleback exhaust. The Y features a stepped design which puts larger diameter tubing at the transition of gas flow as the exhaust is split from the main circuit into each of the rear circuits of the system with a triple stepped graduation to the 2" rear circuit. This design builds higher torque than any other catback on the market while building the same horsepower numbers that are seen in most higher end catback exhaust designs. Additionally, the 2" secondary circuit design biases the exhaust sound frequency to ensure drone-free operation. This midpipe is the forward component in our Catback Exhausts for the 2019+ Ascent only, it is a unique design not shared with any other Subaru vehicle to date.
- Our 2019+ Subaru Ascent Midpipe features a 3" primary circuit with a unique Y section that ensures optimal flow transition from the main 3" circuit into our 2" rear circuit axleback exhaust. The Y features a stepped design which puts larger diameter tubing at the transition of gas flow as the exhaust is split from the main circuit into each of the rear circuits of the system with a triple stepped graduation to the 2" rear circuit. This design builds higher torque than any other catback on the market while building the same horsepower numbers that are seen in most higher end catback exhaust designs. Additionally, the 2" secondary circuit design biases the exhaust sound frequency to ensure drone-free operation
- This midpipe is the forward component in our Catback Exhausts for the 2019+ Ascent only, it is a unique design not shared with any other Subaru vehicle to date
- The midpipe is a 3 piece design featuring latch-over V-band clamps at the two connections in the middle of the system with factory fitting 3" flared flange at the forward (downpipe) end and factory fit flanges at the axleback section. These latch over style V-band clamps allow for easy installation and the three piece design and positioning of the V-band flanges in the system allows for maximum adjustment for ground and vehicle chassis clearance. The midpipe ships with a proprietary 3" donut gasket which allows you to connect the larger midpipe main circuit to your factory downpipe or to a Nameless Performance 3" downpipe with no restriction to flow between the 3" downpipe circuit and the 3" midpipe primary circuit
- The system is built entirely of T304 stainless steel to ensure top quality corrosion resistance and long life of the product
- Installation Instructions:
- Installation Guide - Axleback/Catback/Midpipe
- Upgrading to our long lasting Nameless Performance
- from the factory rubber bushings is highly recommended. The softer rubber factory bushings are overly flexible and if you race your car or spend time at an incline off-road, the exhaust can "wag" left to right which sometimes causes noise or the tips to touch the rear bumper. When this happens there is a chance your bumper can be damaged or if you have a hitch or any other accessories can cause annoying sounds. The best way to avoid this is to use our urethane exhaust bushings to hold the exhaust in place. These upgraded bushings are not necessary to install our exhaust systems but for the small cost of upgraded units, it is an excellent idea!
- Fits: 2019-2025 Ascent
Q&A
- Best midpipe for 19-25 Ascent? Our 2019+ Subaru Ascent Midpipe features a 3" primary circuit with a unique Y section that ensures optimal flow transition from the main 3" circuit into our 2" rear circuit axleback exhaust. The Y features a stepped design which puts larger diameter tubing at the transition of gas flow as the exhaust is split from the main circuit into each of the rear circuits of the system. Fits 2019-2025 Ascent.
- What is the 19-25 Ascent midpipe made from? The official listing describes T304 stainless steel.
Shipping and Delivery
Shipping and Delivery
Review our Shipping Policy for delivery details, shipping costs and exclusions.
Warranty and Support
Warranty and Support
Return and Refund
Return and Refund
Eligibility, exclusions, applicable fees and exceptions are detailed in our Return Policy. Restrictions apply to special-order and custom products.
Proposition 65
Proposition 65
Proposition 65 Warnings: cancer and reproductive harm www.p65warnings.ca.gov
![Nameless Performance [19-25 Ascent] Midpipe](http://jdmuscleusa.com/cdn/shop/files/19_CBE__23565__82891__58069.1706811264.jpg?v=1794842628&width=1445)