FREE SHIPPING* On Orders Over $199 within 48 States
Shop in Confidence with Our Price Protection Program!
The 1% Award · Auto Parts Store of the Year 2026
Clear Car Save Vehicle
  • GSC P-D Chrome Polished Exhaust Valve - 31mm Head | +1mm - Honda K Series Vtec | Set 8

GSC Power Division

GSC Power Division Be the first one to review

GSC P-D Chrome Polished Exhaust Valve - 31mm Head | +1mm - Honda K Series Vtec | Set 8

$12753 $150.03 Save $22.50
Earn $2.55 In JDMuscle Rewards!
Ships When Available-Lead Time Applies ⓘ
Financing available starting $3.98 /month and as low as 0% APR.

Auto Parts Store of the Year 2026

GSC Power Division GSC P-D Chrome Polished Exhaust Valve - 31mm Head | +1mm - Honda K Series Vtec | Set 8
Be the first one to review

Estimated Shipping Widget will be displayed here!

Profile Avatar

Talk to an Enthusiast

Verify Fitment & Product Recommendations

M-F 8:30AM - 5:00PM

(866) 833-3536 Email

Fitment

Description

When designing these valves, GSC used advanced 3D design and simulation programs to create a stronger and higher flowing valve head design. Prototypes were used in the specific applications to make sure that they have the highest flowing valve head that is available on the market today. The materials they have used have less valve distortion at the face than any of the tested designs which allow for better sealing under extreme conditions to promote more consistent performance through the life of the valve. 

Here are more key features:

Valve Features:

 

  • Swirl polished heads for smoother airflow over the valve
  • Back cut to reduce valve weight for higher rpm, higher boost pressure and allow for more aggressive cam profiles without increasing valve spring seat pressures.
  • Valve stems are micro-polished to allow for less oil retention on the stem which creates less drag on the stem to guide for a smoother motion.
  • Fully nitrated ( this includes the 45 which increases valve life and makes a better seal at the valve seat for improved cylinder pressure) also reduces carbon buildup on the backside of the valve.
  • Intake valves are a modified 21-4n stainless and Exhausts are a modified 23-8n stainless material for high heat capacity while maintaining longevity.
  • Valve tips are either hardened or have a stelite wafer tip fused so that the tip is within 5 Rockwell C of the rocker or valve tappet for extended life and less wear
  • Valve tip lengths. They have taken extra time to adjust tip heights on the applications to require less tipping of the valve to maintain proper tip height for proper valvetrain geometry and to cut down on install times when setting valve lash.

    •  

    They have also adjusted the Keeper grove to properly balance intake and exhaust spring pressures to reduce the use of valve spring shims and maximize performance from their spring and retainer kits.

    Valves will work with an OEM keeper/lock or when available their upgraded keeper/lock. It's not mandatory but it is suggested that any valve lock not be reused on performance applications due to material grooving.

    Here are more key features:

    Valve Features:

     

  • Swirl polished heads for smoother airflow over the valve
  • Back cut to reduce valve weight for higher rpm, higher boost pressure and allow for more aggressive cam profiles without increasing valve spring seat pressures.
  • Valve stems are micro-polished to allow for less oil retention on the stem which creates less drag on the stem to guide for a smoother motion.
  • Fully nitrated ( this includes the 45 which increases valve life and makes a better seal at the valve seat for improved cylinder pressure) also reduces carbon buildup on the backside of the valve.
  • Intake valves are a modified 21-4n stainless and Exhausts are a modified 23-8n stainless material for high heat capacity while maintaining longevity.
  • Valve tips are either hardened or have a stelite wafer tip fused so that the tip is within 5 Rockwell C of the rocker or valve tappet for extended life and less wear
  • Valve tip lengths. They have taken extra time to adjust tip heights on the applications to require less tipping of the valve to maintain proper tip height for proper valvetrain geometry and to cut down on install times when setting valve lash.

    •  

    They have also adjusted the Keeper grove to properly balance intake and exhaust spring pressures to reduce the use of valve spring shims and maximize performance from their spring and retainer kits.

    Valves will work with an OEM keeper/lock or when available their upgraded keeper/lock. It's not mandatory but it is suggested that any valve lock not be reused on performance applications due to material grooving.

      Shipping and Delivery

      Review our Shipping Policy for delivery details, shipping costs and exclusions.

      Warranty and Support

      Limited Manufacturer Warranty

      Return and Refund

      Eligibility, exclusions, applicable fees and exceptions are detailed in our Return Policy. Restrictions apply to special-order and custom products.

      Proposition 65

      Proposition 65 Warnings: cancer and reproductive harm www.p65warnings.ca.gov