Molded Coolant Hose - 18in Centerline, 1.5in ID

This Gates Molded Coolant Hose - 18in Centerline, 1.5in ID, part 23460, is a Gates molded coolant hose. Per the stored Gates copy, Gates Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, and the stored copy's application line for this part reads '2019-05 Subaru, Outback, 4-Cyl. 2.5 L, Upper'.

Features:

• Gates part number 23460
• Centerline length 18in; inside diameter 1.5in, per the legacy title
• EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover, per the stored Gates copy
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances), per that copy
• Engineered to resist electrochemical degradation, the leading cause of hose failure, per that copy
• Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C), per that copy
• Pre-shaped to fit and to ensure perfectly sealed conditions; specifically-engineered materials resist collapse under vacuum, per that copy
• Caution: do not use for fuel or oil transfer applications, per that copy
• Gates recommends replacing hose clamps each time a new coolant hose is installed, per that copy
• 1 unit per SKU, per the stored listing attributes

Fitment:

• 254 entries in the stored fitment list: a broad shared Subaru list including Crosstrek, Forester, Impreza, Legacy, Outback, WRX and WRX STI applications; the stored copy's application line names the Subaru Outback 4-Cyl. 2.5L (2005-2019), Upper
• Confirm by part number 23460 before ordering

Q&A:

• Q: What vehicles does this hose fit? A: Per the stored Gates copy, the application line for part 23460 names the Subaru Outback with the 4-Cyl. 2.5L engine, 2005-2019, in the Upper position, while the stored fitment list is a broad 254-entry shared Subaru list. Confirm by part number 23460 and by the 18in centerline length and 1.5in inside diameter before ordering.
• Q: What is included? A: One Gates Molded Coolant Hose, part 23460, is included per SKU, per the stored listing attributes. Per the stored Gates copy, Gates recommends replacing hose clamps each time a new coolant hose is installed.
• Q: What is this hose made of? A: Per the stored Gates copy, this hose has an EPDM tube with synthetic fiber knit reinforcement and a heat-, ozone- and chemical coolant-resistant EPDM cover, and it meets SAE 20R4, class D2 and DIN 73411, class A requirements (except for tolerances).

Review our Shipping Policy for delivery details, shipping costs and exclusions.

Eligibility, exclusions, applicable fees and exceptions are detailed in our Return Policy. Restrictions apply to special-order and custom products.

Proposition 65 Warnings: cancer and reproductive harm www.p65warnings.ca.gov