Water/Methanol Injection Kit - V3 Internal MAP with 35 PSI Max, 200 PSI Pump, 1 Gallon Reservoir, Conductive Fluid Level Sensor

• Universal

The AEM Water/Methanol Injection Kit (PN 30-3300) is a universal water/methanol injection system for forced induction gas race engines. Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing without using high-octane racing fuel, for power gains of up to 20%. This kit uses the Boost Dependent controller with an on-board manifold absolute pressure (MAP) sensor with a molded-in nipple for a boost hose pickup, for forced induction vehicles up to 35 PSI of boost, and includes a 1.15-gallon tank with an anti-starvation reservoir and an integral conductive low-fluid sensor.

• Part number: 30-3300
• Fitment: Universal - forced induction gas engines up to 35 PSI of boost
• Boost Dependent progressive controller with on-board MAP sensor, large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button, and mounting tabs
• Heavy-duty high-pressure injection pump with integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion; internally bypassed pump does not cycle on and off and provides quiet, smooth operation
• Precision-machined billet-aluminum injector with integral check valve
• Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min)
• 20 feet of injection tubing included
• LED dash light for system status and low fluid warning
• Boost Safe failsafe output included
• 1.15-gallon tank with anti-starvation reservoir, integral conductive low-fluid sensor and positive lock connector

Frequently Asked Questions

Does this fit my vehicle?
This is a universal water/methanol injection kit for forced induction (turbocharged or supercharged) gas-powered race engines running up to 35 PSI of boost. It is not vehicle specific.

What is included in the box?
The kit includes the Boost Dependent controller, 200 PSI injection pump, precision-machined billet-aluminum injector with three interchangeable nozzles (250cc/min, 500 cc/min and 1,000cc/min), the 1.15-gallon tank with integral conductive low-fluid sensor, 20 feet of injection tubing and an LED dash light.

What methanol concentration can I run?
AEM strongly recommends that users never exceed a 50% methanol concentration when using any AEM Water/Methanol system or component.

Review our Shipping Policy for delivery details, shipping costs and exclusions.

Eligibility, exclusions, applicable fees and exceptions are detailed in our Return Policy. Restrictions apply to special-order and custom products.

Proposition 65 Warnings: cancer and reproductive harm www.p65warnings.ca.gov