Water/Methanol Injection Kit - V2 Multi Input 0-5V MAF/MAP Frequency/Duty Cycle, with Tank

• Universal

The AEM Water/Methanol Injection Kit (PN 30-3350) is a universal water/methanol injection system with AEM's Multi Input controller and a 1-gallon tank. Water/methanol injection for forced induction (turbocharged or supercharged) gas-powered race engines is a proven means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows racers to reliably increase boost and advance ignition timing without using high-octane racing fuel, for power gains of up to 20%. The Multi Input controller works with an external 0-5v voltage-based external MAP sensor, a frequency based input for Injector Duty Cycle (IDC), frequency-based mass airflow (MAF), or a 0-5v voltage-based MAF, which enables installation on high compression naturally aspirated vehicles via the MAF/IDC settings and on ultra-high boost vehicles (above 35 PSI) using an external MAP sensor. This is the single-injector kit with the 1-gallon tank and fluid level sensor.

• Part number: 30-3350
• Fitment: Universal - forced induction and high compression naturally aspirated gas engines
• Multi Input (0-5v/frequency) progressive controller with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button, and mounting tabs
• Heavy-duty high-pressure injection pump with integral fittings, a Santoprene diaphragm and EPDM seals to resist corrosion; internally bypassed pump does not cycle on and off and provides quiet, smooth operation
• Precision-machined billet-aluminum injector with integral check valve
• Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500 cc/min & 1,000cc/min)
• 20 feet of injection tubing included
• LED dash light for system status and low fluid warning
• Boost Safe failsafe output included
• 1.15-gallon tank with anti-starvation reservoir, integral conductive low-fluid sensor and positive lock connector
• Single injector kit

Frequently Asked Questions

Does this fit my vehicle?
This is a universal Multi Input water/methanol injection kit. It fits forced induction applications and high compression naturally aspirated vehicles via the MAF/IDC settings; it is not vehicle specific.

What is included in the box?
The kit includes the Multi Input controller, 200 PSI injection pump, single billet-aluminum injector with three interchangeable nozzles (250cc/min, 500 cc/min and 1,000cc/min), the 1-gallon tank with integral conductive low-fluid sensor, 20 feet of injection tubing and an LED dash light.

What methanol concentration can I run?
AEM strongly recommends that users never exceed a 50% methanol concentration when using any AEM Water/Methanol system or component.

Review our Shipping Policy for delivery details, shipping costs and exclusions.

Eligibility, exclusions, applicable fees and exceptions are detailed in our Return Policy. Restrictions apply to special-order and custom products.

Proposition 65 Warnings: cancer and reproductive harm www.p65warnings.ca.gov