Infinity Plug & Play Jumper Harness

The AEM Infinity Plug & Play Jumper Harness (PN 30-3517) allows a plug and play installation of an AEM Infinity 506 or Infinity 508 ECU on a 1994-1996 Nissan Silvia equipped with the SR20DET 2.0L DOHC I-4 turbo engine. The Plug & Play harness combines with an Infinity ECU to replace the factory ECU, eliminating the need for cutting and splicing wires, and the Infinity ECU offers control over all engine functions. The Infinity ECU runs the engine with a speed density fueling calculation, eliminating the need for the OEM airbox and mass airflow sensor (MAF); an intake air temperature (IAT) sensor and a manifold absolute pressure (MAP) sensor are required. The Plug & Play harness includes a Wideband O2 connector, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a High Performance DTM-Style 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensor. The expansion port also includes a sensor ground, 5v reference, 12v power from relay and a high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift.

• Part number: 30-3517
• Fitment: 1994-1996 Nissan Silvia, SR20DET 2.0L DOHC I-4 turbo engine
• For AEM Infinity 506 and Infinity 508 ECUs, sold separately
• Speed density fueling: an IAT sensor and a MAP sensor are required (AEM Auxiliary Harness PN 30-3510-00 makes adding these sensors plug and play)
• Wideband O2 connector, AEMnet connector and auxiliary DTM-Style 12P connector included
• Supports the OEM Nissan Cam Angle Sensor (CAS) 360 degree pattern
• Use of the Infinity-8h ECU results in the loss of the VTC solenoid and MIL functions

Frequently Asked Questions

Does this fit my vehicle?
This harness fits the 1994-1996 Nissan Silvia with the SR20DET 2.0L turbo engine running an AEM Infinity 506 or Infinity 508 ECU.

What is included in the box?
This listing is for the Infinity Plug & Play Jumper Harness (PN 30-3517) only. The Infinity ECU, IAT sensor and MAP sensor are sold separately.

Does this harness require cutting or splicing?
No. The harness eliminates the need for cutting and splicing wires, and the Infinity ECU replaces the factory ECU when combined with this harness.

Review our Shipping Policy for delivery details, shipping costs and exclusions.

Eligibility, exclusions, applicable fees and exceptions are detailed in our Return Policy. Restrictions apply to special-order and custom products.

Proposition 65 Warnings: cancer and reproductive harm www.p65warnings.ca.gov