Infinity 506/508 Plug & Play Jumper Harness

• 2003-2005 Mitsubishi | EVO 8

The AEM Infinity Plug & Play Jumper Harness (PN 30-3511) connects an AEM Infinity 506 (PN 30-7106) or Infinity 508 (PN 30-7108) ECU to manual transmission equipped 2003-2005 Mitsubishi Lancer Evolution VIII racing engines. The Infinity ECU includes an engine-specific start-up calibration for this application and connects to the engine via this Plug & Play harness, which is sold separately. Combined with the harness, the Infinity ECU replaces the factory ECU and controls all engine functions, and the Plug & Play wiring harness adapter eliminates the need for cutting and splicing wires. The Plug & Play harness includes a Wideband O2 connector, an AEMnet connector for communication with other AEMnet enabled devices and an auxiliary connector with a High Performance DTM-Style 12P connector for adding common aftermarket sensors including fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensor. The expansion port also includes a sensor ground, 5v reference, 12v power from relay and a high side output for activating a relay or solenoid, a low side output for boost control and analog inputs for mode switch and no-lift shift. Per AEM's instructions, the auxiliary connector kit includes a DTM 12P mating connector, 12 DTM terminals and a DTM 12P wedgelock, which are terminated by the installer with 16-22 AWG wire (not included).

• Part number: 30-3511
• Fitment: 2003-2005 Mitsubishi Lancer Evolution VIII, manual transmission
• For AEM Infinity 506 (PN 30-7106) and Infinity 508 (PN 30-7108) ECUs, sold separately
• Sealed, weatherproof Plug & Play harness with expansion port
• Wideband O2 connector and AEMnet connector included
• Auxiliary connector: High Performance DTM-Style 12P connector for fuel pressure, air inlet temperature, MAP, oil temperature and ethanol content sensors

Frequently Asked Questions

Does this fit my vehicle?
This harness fits manual transmission equipped 2003-2005 Mitsubishi Lancer Evolution VIII models running an AEM Infinity 506 or Infinity 508 ECU.

What is included in the box?
This listing is for the Infinity Plug & Play Jumper Harness (PN 30-3511) only. The Infinity ECU is sold separately.

Does this harness require cutting or splicing?
No. The Plug & Play wiring harness adapter eliminates the need for cutting and splicing wires, and the harness combines with the Infinity ECU to replace the factory ECU.

Review our Shipping Policy for delivery details, shipping costs and exclusions.

Eligibility, exclusions, applicable fees and exceptions are detailed in our Return Policy. Restrictions apply to special-order and custom products.

Proposition 65 Warnings: cancer and reproductive harm www.p65warnings.ca.gov