DFC

DFC

888549G

Profile Avatar

Talk to an Enthusiast

Verify Fitment & Product Recommendations

M-F 9:00AM - 6:00PM

Out of stock
DFC 888549G

Fitment

Description

DFC GEOSPEC Coated Brake Rotors Specially coated with a special paint to form a durable and attractive silver-gray finish that fights rust far better than other conventional paint or zinc coatings. Each DFC GeoSpec Coated Brake Rotor is processed dry, shipped dry, and ready to install without any additional preparation. An average brake job takes 1.25-2.5 hours per axle. Without the need to clean an oil covered rotor, this saves a tremendous amount of time and money during the installation process. The coating is simply and safely swept away by the friction material with no harmful effects.Formulated with the G3000/G11H18 cast iron specification, DFC GEOSPEC Coated Brake Rotors are engineered to match OEM specifications for durability, reliability, and stability. Each rotor casting is sent to our state of the art machining facilities, where it is processed to the tightest tolerances available in the market today. Then, the rotor is prepared with a non-directional finish to promote a faster and more even brake pad bed-in, along with quieter and smoother stops. Finally, all vented rotors are 100% inspected for balance and are corrected if necessary with our state of the art electronic mill-balance process. After all of the machining processes are completed, each rotor passes a 100% inspection station that measures all critical attributes to ensure that each rotor meets OE specifications. This further guarantees that each and every rotor delivered to you is trouble free. Every rotor comes with a 12 Months Warranty against defects in material and workmanship.
  • DFC 5000 ADVANCED Brake Pads - Specifically formulated for each axle on every vehicle (family sedan, sport compact, or light duty truck) to maintain balanced braking, critical for vehicles with ABS and automated braking.
  • Scorched to remove uncured bonding agents, minimizing the need for initial break-in period and increasing stopping power from the initial stop.
  • Ready to Install - No additional pre-degreasing preparation needed (saves time and money during installation process).
  • DFC Hardware Kits - reduces noise/vibrations and premature wear. Minimizes drag to improve fuel efficiency.
  • DFC Premium Rubber-Steel-Rubber shims for improved NVH (noise, vibration, and harshness) characteristics.
  • 100% precision cut and mill-balanced for smoother stopping and zero vibration at any speed.
  • Engineered with premium G3000/G11H18 iron castings for strength, stability, and durability
  • GEOSPEC Coating provides superior corrosion protection over zinc/conventional painting
  • Provides correct friction performance, resulting in safest possible braking.
  • Stainless Steel Material - Eliminates heat and corrosion deterioration.
  • Chamfered and Slotted (where applicable) to reduce noise when braking.
  • Designed to deliver a consistent pedal feel and superb brake response.
  • Designed to meet the same form, fit, and function as OEM brake rotors.
  • Non-directional finish to promote faster break-in and smoother stops.
  • Rotor-friendly with proven longer rotor and pad life.
  • Quality tested to ensure long-lasting performance.
  • Designed specifically for each application.
  • 100% Asbestos free formulation.
  • Rubber Coated Abutment Clips.
  • No modifications required.

DFC GEOSPEC Coated Brake Rotors Specially coated with a special paint to form a durable and attractive silver-gray finish that fights rust far better than other conventional paint or zinc coatings. Each DFC GeoSpec Coated Brake Rotor is processed dry, shipped dry, and ready to install without any additional preparation. An average brake job takes 1.25-2.5 hours per axle. Without the need to clean an oil covered rotor, this saves a tremendous amount of time and money during the installation process. The coating is simply and safely swept away by the friction material with no harmful effects.Formulated with the G3000/G11H18 cast iron specification, DFC GEOSPEC Coated Brake Rotors are engineered to match OEM specifications for durability, reliability, and stability. Each rotor casting is sent to our state of the art machining facilities, where it is processed to the tightest tolerances available in the market today. Then, the rotor is prepared with a non-directional finish to promote a faster and more even brake pad bed-in, along with quieter and smoother stops. Finally, all vented rotors are 100% inspected for balance and are corrected if necessary with our state of the art electronic mill-balance process. After all of the machining processes are completed, each rotor passes a 100% inspection station that measures all critical attributes to ensure that each rotor meets OE specifications. This further guarantees that each and every rotor delivered to you is trouble free. Every rotor comes with a 12 Months Warranty against defects in material and workmanship.

  • DFC 5000 ADVANCED Brake Pads - Specifically formulated for each axle on every vehicle (family sedan, sport compact, or light duty truck) to maintain balanced braking, critical for vehicles with ABS and automated braking.
  • Scorched to remove uncured bonding agents, minimizing the need for initial break-in period and increasing stopping power from the initial stop.
  • Ready to Install - No additional pre-degreasing preparation needed (saves time and money during installation process).
  • DFC Hardware Kits - reduces noise/vibrations and premature wear. Minimizes drag to improve fuel efficiency.
  • DFC Premium Rubber-Steel-Rubber shims for improved NVH (noise, vibration, and harshness) characteristics.
  • 100% precision cut and mill-balanced for smoother stopping and zero vibration at any speed.
  • Engineered with premium G3000/G11H18 iron castings for strength, stability, and durability
  • GEOSPEC Coating provides superior corrosion protection over zinc/conventional painting
  • Provides correct friction performance, resulting in safest possible braking.
  • Stainless Steel Material - Eliminates heat and corrosion deterioration.
  • Chamfered and Slotted (where applicable) to reduce noise when braking.
  • Designed to deliver a consistent pedal feel and superb brake response.
  • Designed to meet the same form, fit, and function as OEM brake rotors.
  • Non-directional finish to promote faster break-in and smoother stops.
  • Rotor-friendly with proven longer rotor and pad life.
  • Quality tested to ensure long-lasting performance.
  • Designed specifically for each application.
  • 100% Asbestos free formulation.
  • Rubber Coated Abutment Clips.
  • No modifications required.

ATTRIBUTES: false, false, false, false, Unknown, automotive, N/A, 1

BRAND: DFC

MPN: dfc4512-59157




Air Freight Prohibited: false
Not Carb Approved: false
Carb Acknowledgement Required: false
Ltl Freight Required: false
Prop 65: Unknown
Part Type: automotive
Epa: N/A
Units Per Sku: 1
Fitment:
Acura CL Base 2002
Acura CL Base 2003
Acura CL Premium 2001
Acura CL Type-S 2001
Acura CL Type-S 2002
Acura CL Type-S 2003
Acura TL Base 1999
Acura TL Base 2000
Acura TL Base 2001
Acura TL Base 2002
Acura TL Base 2003
Acura TL Base 2004
Acura TL Base 2005
Acura TL Base 2006
Acura TL Base 2007
Acura TL Base 2008
Acura TL Type-S 2002
Acura TL Type-S 2003
Acura TSX Base 2004
Acura TSX Base 2005
Acura TSX Base 2006
Acura TSX Base 2007
Acura TSX Base 2008
Acura TSX Base 2009
Acura TSX Base 2010
Acura TSX Base 2011
Acura TSX Base 2012
Acura TSX Base 2013
Acura TSX Base 2014
Acura TSX Special Edition 2012
Acura TSX Special Edition 2013
Acura TSX Special Edition 2014
Acura TSX V6 2010
Acura TSX V6 2011
Acura TSX V6 2012
Acura TSX V6 2013
Acura TSX V6 2014
Honda Accord EX 2003
Honda Accord EX 2004
Honda Accord EX 2005
Honda Accord EX 2006
Honda Accord EX 2007
Honda Accord EX 2008
Honda Accord EX 2009
Honda Accord EX 2010
Honda Accord EX 2011
Honda Accord EX 2012
Honda Accord EX-L 2008
Honda Accord EX-L 2009
Honda Accord EX-L 2010
Honda Accord EX-L 2011
Honda Accord EX-L 2012
Honda Accord Hybrid 2006
Honda Accord Hybrid 2007

Shipping and Delivery

Review our Shipping Policy for delivery details, shipping costs and exclusions.

Warranty and Support

For DFC warranty information, contact our support team.

Return and Refund

Eligibility, exclusions, applicable fees and exceptions are detailed in our Return Policy. Restrictions apply to special-order and custom products.

Proposition 65

Proposition 65 Warnings: cancer and reproductive harm www.p65warnings.ca.gov