DFC GEOSPEC Coated Brake Rotors Specially coated with a special paint to form a durable and attractive silver-gray finish that fights rust far better than other conventional paint or zinc coatings. Each DFC GeoSpec Coated Brake Rotor is processed dry, shipped dry, and ready to install without any additional preparation. An average brake job takes 1.25-2.5 hours per axle. Without the need to clean an oil covered rotor, this saves a tremendous amount of time and money during the installation process. The coating is simply and safely swept away by the friction material with no harmful effects.Formulated with the G3000/G11H18 cast iron specification, DFC GEOSPEC Coated Brake Rotors are engineered to match OEM specifications for durability, reliability, and stability. Each rotor casting is sent to our state of the art machining facilities, where it is processed to the tightest tolerances available in the market today. Then, the rotor is prepared with a non-directional finish to promote a faster and more even brake pad bed-in, along with quieter and smoother stops. Finally, all vented rotors are 100% inspected for balance and are corrected if necessary with our state of the art electronic mill-balance process. After all of the machining processes are completed, each rotor passes a 100% inspection station that measures all critical attributes to ensure that each rotor meets OE specifications. This further guarantees that each and every rotor delivered to you is trouble free. Every rotor comes with a 12 Months Warranty against defects in material and workmanship.
- DFC 5000 ADVANCED Brake Pads - Specifically formulated for each axle on every vehicle (family sedan, sport compact, or light duty truck) to maintain balanced braking, critical for vehicles with ABS and automated braking.
- Scorched to remove uncured bonding agents, minimizing the need for initial break-in period and increasing stopping power from the initial stop.
- Ready to Install - No additional pre-degreasing preparation needed (saves time and money during installation process).
- DFC Premium Rubber-Steel-Rubber shims for improved NVH (noise, vibration, and harshness) characteristics.
- 100% precision cut and mill-balanced for smoother stopping and zero vibration at any speed.
- Engineered with premium G3000/G11H18 iron castings for strength, stability, and durability
- GEOSPEC Coating provides superior corrosion protection over zinc/conventional painting
- Provides correct friction performance, resulting in safest possible braking.
- Chamfered and Slotted (where applicable) to reduce noise when braking.
- Designed to deliver a consistent pedal feel and superb brake response.
- Designed to meet the same form, fit, and function as OEM brake rotors.
- Non-directional finish to promote faster break-in and smoother stops.
- Rotor-friendly with proven longer rotor and pad life.
- Quality tested to ensure long-lasting performance.
- 100% Asbestos free formulation.
- No modifications required.
DFC GEOSPEC Coated Brake Rotors Specially coated with a special paint to form a durable and attractive silver-gray finish that fights rust far better than other conventional paint or zinc coatings. Each DFC GeoSpec Coated Brake Rotor is processed dry, shipped dry, and ready to install without any additional preparation. An average brake job takes 1.25-2.5 hours per axle. Without the need to clean an oil covered rotor, this saves a tremendous amount of time and money during the installation process. The coating is simply and safely swept away by the friction material with no harmful effects.Formulated with the G3000/G11H18 cast iron specification, DFC GEOSPEC Coated Brake Rotors are engineered to match OEM specifications for durability, reliability, and stability. Each rotor casting is sent to our state of the art machining facilities, where it is processed to the tightest tolerances available in the market today. Then, the rotor is prepared with a non-directional finish to promote a faster and more even brake pad bed-in, along with quieter and smoother stops. Finally, all vented rotors are 100% inspected for balance and are corrected if necessary with our state of the art electronic mill-balance process. After all of the machining processes are completed, each rotor passes a 100% inspection station that measures all critical attributes to ensure that each rotor meets OE specifications. This further guarantees that each and every rotor delivered to you is trouble free. Every rotor comes with a 12 Months Warranty against defects in material and workmanship.
- DFC 5000 ADVANCED Brake Pads - Specifically formulated for each axle on every vehicle (family sedan, sport compact, or light duty truck) to maintain balanced braking, critical for vehicles with ABS and automated braking.
- Scorched to remove uncured bonding agents, minimizing the need for initial break-in period and increasing stopping power from the initial stop.
- Ready to Install - No additional pre-degreasing preparation needed (saves time and money during installation process).
- DFC Premium Rubber-Steel-Rubber shims for improved NVH (noise, vibration, and harshness) characteristics.
- 100% precision cut and mill-balanced for smoother stopping and zero vibration at any speed.
- Engineered with premium G3000/G11H18 iron castings for strength, stability, and durability
- GEOSPEC Coating provides superior corrosion protection over zinc/conventional painting
- Provides correct friction performance, resulting in safest possible braking.
- Chamfered and Slotted (where applicable) to reduce noise when braking.
- Designed to deliver a consistent pedal feel and superb brake response.
- Designed to meet the same form, fit, and function as OEM brake rotors.
- Non-directional finish to promote faster break-in and smoother stops.
- Rotor-friendly with proven longer rotor and pad life.
- Quality tested to ensure long-lasting performance.
- 100% Asbestos free formulation.
- No modifications required.
ATTRIBUTES: false, false, false, false, Unknown, automotive, N/A, 1
BRAND: DFC
MPN: dfc4502-76190
Air Freight Prohibited: false
Not Carb Approved: false
Carb Acknowledgement Required: false
Ltl Freight Required: false
Prop 65: Unknown
Part Type: automotive
Epa: N/A
Units Per Sku: 1
Fitment:
Toyota Corolla FX 2025
Toyota Corolla FX 2026
Toyota Corolla Hybrid LE 2020
Toyota Corolla Hybrid LE 2021
Toyota Corolla Hybrid LE 2022
Toyota Corolla Hybrid LE 2023
Toyota Corolla Hybrid LE 2024
Toyota Corolla Hybrid LE 2025
Toyota Corolla Hybrid LE 2026
Toyota Corolla Hybrid Nightshade 2024
Toyota Corolla Hybrid SE 2023
Toyota Corolla Hybrid SE 2024
Toyota Corolla Hybrid SE 2025
Toyota Corolla Hybrid SE 2026
Toyota Corolla Hybrid XLE 2023
Toyota Corolla Hybrid XLE 2024
Toyota Corolla Hybrid XLE 2025
Toyota Corolla Hybrid XLE 2026
Toyota Corolla L 2020
Toyota Corolla L 2021
Toyota Corolla L 2022
Toyota Corolla LE 2020
Toyota Corolla LE 2021
Toyota Corolla LE 2022
Toyota Corolla LE 2023
Toyota Corolla LE 2024
Toyota Corolla LE 2025
Toyota Corolla LE 2026
Toyota Corolla Nightshade 2024
Toyota Corolla Nightshade 2025
Toyota Corolla SE 2020
Toyota Corolla SE 2021
Toyota Corolla SE 2022
Toyota Corolla SE 2023
Toyota Corolla SE 2024
Toyota Corolla SE 2025
Toyota Corolla SE 2026
Toyota Corolla SE Apex 2021
Toyota Corolla SE Apex 2022
Toyota Corolla SE Nightshade 2020
Toyota Corolla SE Nightshade 2021
Toyota Corolla SE Nightshade 2022
Toyota Corolla XLE 2020
Toyota Corolla XLE 2021
Toyota Corolla XLE 2022
Toyota Corolla XSE 2020
Toyota Corolla XSE 2021
Toyota Corolla XSE 2022
Toyota Corolla XSE 2023
Toyota Corolla XSE 2024
Toyota Corolla XSE 2025
Toyota Corolla XSE 2026
Toyota Corolla XSE Apex 2021
Toyota Corolla XSE Apex 2022
