KSport ProComp 4 Piston Rear Big Brake System | 1988-1991 Civic/CRX Si Only | BKHD010-442SO

Ksport big brake kits provide the ultimate in stopping power for your vehicle. Integrating new brake technology into the design of the kits allows for a kit that highly reduces brake fade and continually cools and refreshes the brake pads surface under braking. These brake systems are designed for easy installation with minimal tools required (in most applications). Their extreme lightweight caliper comes in differential bore configuration. It is machined from aircraft quality billet, weighs just over 5lbs. each, and has machined in protection grooves for the bridge tubes. Aluminum pistons, high temperature seals, and stainless steel brake pad wear plates are also standard on each caliper design. The opposed piston caliper design greatly improves pad wear and caliper rigidity over the OEM design. The stainless steel brake lines stop expansion under pressure.

Most applications utilize the 2-piece floating disc assembly, which reduces weight both rotating and unsprung. The floating disc also stops thermal stresses of extreme heat from warping the disc or cupping the braking surface. The unique slot design on the rotor greatly reduces braking noise and expels gas and pad debris faster than conventional slot designs. Every rotor is always heat treated and balanced before shipment for the best possible performance. Cross drilled rotors tend to run cooler than slotted and are recommended for daily driven vehicles. Slotted rotors are recommended for vehicles that will be seeing more track use than daily driving.

Ksport SC5 Street Pad Specifications:These NAOC ceramic pads are designed to give you the optimal braking performance under street and occasional track conditions. Optimal operating temperatures are between 194?F ? 1022?F for fast warm up under normal driving conditions. These pads reduce the amount of brake dust by 50% or more when compared to their race pads. The SC5 pads also greatly reduce the amount of noise and wear on the rotor over the race pads. The average coefficient of friction on this pad is between .46 and .53.

Ksport RC1 Race Pad Specifications:These carbon metallic race pads are designed to give you the best stopping power possible under extreme track conditions. Optimal operation temperatures are between 482?F ? 1472?F so it is not recommended for street use due to the high working temperature needed for optimal performance.

Front 6 pot calipers for 11? and 12? systems

6 pot lightweight aluminum calipers are standard in our 11? and 12? front big brake systems. The opposed piston caliper design greatly improves pad wear and caliper rigidity over the OEM design.

Front 8 pot calipers for 13? and 14? systems

8 pot lightweight aluminum calipers are standard in our 13? and 14? front big brake systems. The opposed piston caliper design greatly improves pad wear and caliper rigidity over the OEM design.

Rear 2 pot calipers for 11? and 12? systems

2 pot lightweight aluminum calipers are standard in our 11? and 12? rear big brake systems. The large 2 piston caliper design greatly improves pad wear and caliper rigidity over the OEM design.

Rear 4 pot calipers for 13? and 14? systems

4 pot lightweight aluminum calipers are standard in our 13? and 14? rear big brake systems. The opposed piston caliper design greatly improves pad wear and caliper rigidity over the OEM design.

Slotted rotors

Slotted rotors are recommended for race applications. Both types have increased ?bite? over stock and continuously clean and refresh the pad surface.

Two piece rotors

All of their ProComp brake systems feature 2 piece rotors. The main benefit to 2 piece rotors is they are extremely lightweight compared to oem one piece rotors. It is fairly common for their rotors to weigh up to 50% less than oem rotors of the same size.

Floating rotor option

For an additional cost you can upgrade any 13? and 14? system to floating rotors. The floating disc stops thermal stresses of extreme heat from warping the disc or cupping the braking surface.

Carbon steel caliper brackets

Every kit comes with CNC machined carbon steel caliper brackets. Due to their calipers being much larger than oem, these brackets help our system bolt right up to your oem caliper bracket location.

Stainless steel brake lines

D.O.T compliant stainless steel braided brake lines are standard in all of their brake kits. Stainless steel brake lines improve overall pedal feel and provide quicker pedal response.

Optional race pads

SC5 street pads are standard equipment in their brake kits along with an option for their race pads. Street pads are ceramic and race pads are carbon metallic. Race pads are NOT recommended for street use due to their working temperature being much higher than street pads.

12 month limited warranty

All Ksport big brake kits come standard with an 12 month warranty which covers manufacturer defects.

Fitment Notes: Si only w/oe rear disc, OEM handbrake will not function

Diameter: 356MM / 14 in

At JDMuscle, we understand that fast and reliable shipping is crucial. With multiple distribution centers across the nation, most in-stock items are shipped within 1-2 business days. On average, you can expect delivery within 1-5 business days for in-stock items. Please note, however, that some products may ship directly from vendors, which could result in additional delays. Products sourced from overseas may also take longer to arrive.

Free Shipping over $199 Policy

• Free shipping is available only for the 48 contiguous states in the U.S.
• Ground shipping applies to regular-sized items only.
• Oversized items such as lips, hoods, and trunks requiring freight shipping are not included in the free shipping program.
• Some manufacturers may impose a shipping surcharge, which will be excluded from the free shipping program.
• The most accurate shipping costs will be displayed at checkout. If you believe the shipping cost is incorrect, please contact us at sales@jdmuscleusa.com for further review.

Carriers

We ship via FedEx, UPS, USPS, and DHL. While we strive to use the most efficient option, we cannot guarantee which carrier will deliver your order. Your items may arrive in multiple packages through different carriers.

Processing Time and Shipping Cut-off

Orders typically take 24 hours to process, with shipping cut-off at 3:00 PM EST. Transit times vary based on location and carrier. Some items, especially those requiring freight shipping, may have extended processing and delivery times. For freight shipping inquiries, contact us at sales@jdmuscleusa.com.

International and Special Shipping Considerations

• International orders are subject to higher shipping fees. If you would like to review your shipping cost, email us at sales@jdmuscleusa.com with your full address and items you plan to purchase.
• In some cases, shipping costs may be incorrectly calculated for international or oversized items. We reserve the right to adjust the shipping fee and will work with you to negotiate a fair cost if needed.
• Customers can challenge and request a review of international shipping fees, and we’ll do our best to find a lower rate where possible.
• Customs Fees & Import Taxes: The shipping charge you pay does not include customs fees or import taxes. These charges vary by country and are the customer’s responsibility. Please check with your local customs office for more details before placing an order.
• Shipping Cost Adjustments: Shipping rates fluctuate, and while we strive to provide the most competitive rates, there may be instances where the shipping cost you paid is significantly lower than the actual cost. In such cases, we reserve the right to request the difference to ensure we cover our basic expenses. We appreciate your understanding and will always aim to keep shipping costs as affordable as possible.

Address Modifications and Fees

• Any modifications to a shipping address after an order is placed may be subject to additional fees.
• For single, small packages, the flat fee is $20. For larger or multiple packages, the fee may be up to $60 or more.

Freight Shipping Guidelines

• Freight shipments require you to be present at the time of delivery.
• The delivery driver may provide a delivery receipt (Bill of Lading). It is crucial to inspect the shipment before signing.
• Carefully check the packaging for any visible damage (dents, punctures, rips) and notate it on the Bill of Lading.
• Open the package and inspect the product itself. If damage is found, document it in detail on the Bill of Lading, take photos, and contact the shipping company to initiate a damage claim.
• Do not refuse the shipment. Contact us at sales@jdmuscleusa.com for guidance.
• If the delivery driver is unable to wait for inspection, note this on the Bill of Lading.

Failure to document damages before signing the Bill of Lading will void any claims for refunds or replacements.

Pre-Installation Inspection Policy

We strongly recommend inspecting all parts or items upon arrival before installation. If you identify any damage, imperfections or missing components, report them immediately to sales@jdmuscleusa.com. Do not install the item. Please note that reports of damage, defects, imperfections or missing components after installation will NOT be honored.

Package Protection

We do our best to ensure your items arrive to you safely but sometimes things happen. If you utilized our Checkout+ feature, rest assured that your package is protected! With package protection, in the event that your package is lost, stolen, or damaged while in transit, we will replace it free of charge. To start a shipping claim, please click here.

Need Assistance?

If you have any concerns about shipping costs or transit times, or if you notice discrepancies during checkout, feel free to reach out to us at sales@jdmuscleusa.com. We’re happy to assist you and ensure a smooth delivery experience.

Our policy lasts 30 days. If 30 days have passed since your purchase, unfortunately, we can’t offer you a refund or exchange. To initiate a return, please email us at sales@jdmuscleusa.com.

Eligibility for Returns

✅ Items must be unused and in the same condition as when received.
✅ Items must be in their original packaging.

Non-Returnable Items

❌ Gift cards
❌ Special-order or custom products

How to Initiate a Return

📧 Include the following details in your return request email:

Order Number

Item(s) to be returned

Reason for return

Important Notes:

Do NOT send your purchase back to the manufacturer.

Do NOT return any items without first setting up a return request with us.

Partial Refunds

Partial refunds may be granted under the following conditions:

⚠️ Items not in original condition, damaged, or missing parts not due to our error.
⚠️ Items returned more than 30 days after delivery.

Restocking Fees

Some manufacturers may charge a restocking fee, which includes but not limited to:

ManufacturerRestocking Fee

ESR30%

JDMuscle15%

PLM & Option Lab 20%

Cancellations

Before placing an order, please confirm availability.

Cancellations within 7 days may be subject to fees to cover third-party transaction costs.

Once the order has been processed (packaged or tracking generated), cancellations are not allowed. Eligible items may be returned instead.

Special-order items cannot be canceled.

Refund Process

🔄 Once your return is received and inspected, we will notify you of the refund status.
💳 Approved refunds will be credited back to your original payment method within 3-10 business days (depending on the payment provider).

Late or Missing Refunds

🔍 Check your bank statement — sometimes the refund may not appear as a new entry but as the disappearance of the pending charge. 📞 Contact your credit card or financing company — they may require additional time for processing.

If you’ve done all of the above and still haven’t received your refund, email us at sales@jdmuscleusa.com for assistance.

Sale Items

Only full-priced items are eligible for returns and refunds.

Exchanges

We replace items only if they are defective or damaged. To request an exchange for the same item, email us at sales@jdmuscleusa.com.

Gifts

🎁 If the item was marked as a gift when purchased and shipped directly to you, you will receive a gift credit for the return value.
📩 If the gift giver had the item shipped to themselves, we will refund the gift giver.

Return Shipping

📦 Customers are responsible for return shipping costs unless the item is damaged, defective, or incorrect (in which case we will cover shipping both ways).

Initial shipping costs are non-refundable.

Return shipping costs will be deducted from the refund amount.

For items over $75, consider using a trackable shipping service or purchasing shipping insurance. We are not responsible for lost or damaged items during return shipping.

Return Shipping Address: Please use the address provided in the RMA/return instructions, as it may differ from the initial shipping address.

Proposition 65 Warnings: cancer and reproductive harm www.p65warnings.ca.gov