BRZ and GR86 Wheel Fitment Guide: Best 17- and 18-Inch Setups
Every BRZ, FR-S, 86 and GR86 — both generations — runs a 5x100 bolt pattern with a 56.1mm hub bore, and the sweet-spot fitments are 17x8 and 18x8 for street cars and 18x9.5 for a wide, square track setup. The five Enkei picks below are active listings in our catalog at $278–$471 per wheel: the PF01 17x8 +35 ($278) and RPF1 17x8 +45 ($284) for lightweight 17-inch setups, the RPF1 18x8 +45 ($343) for an 18-inch street set, and the NT03+M 18x9.5 +40 ($350) and RPF1 18x9.5 +38 ($471) for maximum tire. Match the offset and bore notes in each section to your car before ordering.
Fitment basics that apply to every pick: these cars left the factory on 17x7.5 and 18x7.5 wheels, so an 8-inch-wide wheel is a mild, well-understood step up, while a 9.5-inch wheel is a commitment — it wants a wide tire, an alignment that uses the available room, and honesty about whether the car is a street car or a track car. Listings below with a 73mm or 75mm bore are machined oversize and use hub-centric rings to center on the 56.1mm hub; the RPF1 18x8 below is bored at 56mm to suit Subaru hubs directly. Common tire pairings: 225/45R17 on the 17x8s, 225/40R18 on the 18x8, and 245/35R18 or 255/35R18 on the 18x9.5s.
1. Enkei PF01 17x8 +35 — $278

The value lightweight: the PF01 in 17x8 +35, $278, is the least expensive wheel in this guide and the +35 offset pushes the wheel out toward the fender for the filled-arch look most owners want, on the cheaper 225/45R17 tire size.
2. Enkei RPF1 17x8 +45 — $284

The default answer on this platform for two decades: the RPF1 in 17x8 +45, $284, keeps the offset close to factory, which makes it the lowest-drama fitment here — the pick for a car that has to do everything, every day.
3. Enkei RPF1 18x8 +45 (56mm bore) — $343

Stepping to 18 inches: this RPF1 18x8 +45, $343, is the listing bored at 5x100 with a 56 center bore — sized for Subaru hubs without rings. Pair it with a 225/40R18 for a street setup that keeps overall diameter close to stock.
4. Enkei NT03+M 18x9.5 +40 — $350

The wide option with the motorsport look: the NT03+M in 18x9.5 +40, $350, is built around a 245 or 255-section tire and a square setup at all four corners. At this width the alignment and fender room conversation is mandatory, not optional — that is the price of the grip.
5. Enkei RPF1 18x9.5 +38 SBC — $471

The flagship fitment: the RPF1 in 18x9.5 +38, $471, in Enkei's SBC (Special Brilliant Coating) finish. Same wide-square brief as the NT03+M, in the RPF1 design and the premium finish — the most expensive wheel here, and the one that ends most build threads.
Before you mount them
Wheels expose the next weak link, which on this platform is brakes behind a wide, grippy tire: our JDMuscle big brake kit for the 2022–2026 BRZ/GR86, $1,400, is the pairing to plan for. Then set the ride height to match with our BRZ and GR86 coilover guide and finish the look with the best LED tail lights for the BRZ and GR86.