3D Carbon Seatbelt / Pillar Panel Protection Kit (Scuff Guard)
Fits: 15-21 WRX/STI
Talk to an Enthusiast
Verify Fitment & Product Recommendations
M-F 9:00AM - 6:00PM
For your : Other stickers and vinyls for 15-21 WRX
See all 34-
StickerFab [15-21 WRX/STI] 3D Carbon Hood Scoop Overlay
$20.99In stock
-
StickerFab [15-21 WRX/STI] Smoked Headlight Overlays V2
$20.85In stock
-
StickerFab [15-21 WRX/STI] 3D Carbon Fiber Quarter Mirror Trim Overlays
$15.35In stock
-
StickerFab [15-21 WRX/STI] 3D Carbon Fiber Rear Bumper Overlay
$13.20In stock
-
StickerFab [15-21 WRX/STI] 3D Carbon Fiber Vinyl Door Cup Protectors (2X)
$14.95In stock
-
StickerFab [18-21 WRX/STI] S208 Style Grille Pinstripe
$16.95In stock
-
StickerFab [15-21 WRX/STI] 3D Carbon Center Instrument Panel Dash Trim
$22.99In stock
-
StickerFab [15-17 WRX/STI] S207 Style Grille Pinstripe
$18.65In stock
-
StickerFab [15-21 WRX/STI] Special Edition Dark Smoke Carbon Fiber Headlight Overlays
$49.95In stock
-
StickerFab [15-21 WRX/STI] ST4 6" Sticker
$8.99In stock
-
StickerFab [15-21 WRX/STI] Special Edition Dark Smoke Carbon Fiber Tail Light Overlays
$29.95In stock
-
StickerFab [15-19 WRX/STI] Clear Rock Guard Door Cup Protectors
$16.95In stock
-
StickerFab [15-21 WRX/STI] 3D Carbon Interior Lower Door Protection Kit
$36.99In stock
-
StickerFab [15-21 WRX/STI] 3D Carbon Exterior Lower Door Protection Kit
$45.99In stock
-
StickerFab [18-21 WRX/STI] S208 Type RA Style Grille Pinstripe
$18.99Ships from mfr
-
StickerFab [15-21 WRX] "WRX" Shifter Trim Logo Inlay
$4.99Ships from mfr
-
StickerFab [15-21 WRX/STI, 14-18 Forester, 13-17 Crosstrek] AC Vent 3D Carbon Blackout Overlays
$22.99Ships from mfr
-
StickerFab [15-21 WRX, 14-17 Forester, 13-17 Crosstrek] CVT Shifter Overlay - 3D Carbon
$9.99Ships from mfr
-
StickerFab JDM Style Push to Start 3D Carbon Trim Ring Overlay - 2015-2022 Subaru WRX / STI / Most Subaru
$4.99Ships from mfr
-
StickerFab [15-17 WRX/STI] Original Grille Pinstripe
$16.99Ships from mfr
-
StickerFab [15-21 WRX/STI] S207 JDM Style Rear Bumper Pinstripe
$28.99Ships from mfr
-
StickerFab [15-21 WRX/STI] 3D Carbon SI Drive Trim Overlay
$14.99Ships from mfr
-
StickerFab [15-21 WRX/STI] 3D Carbon Seatbelt / Pillar Panel Protection Kit (Scuff Guard)
$27.99Ships from mfr
-
StickerFab [15-21 WRX/STI, 14-18 Forester, 13-17 Crosstrek] 3D Carbon Fiber Dash Overlays
$15.99Ships from mfr
-
StickerFab [15-20 WRX/STI] 3D Carbon License Plate Panel Overlays
$54.94Ships from mfr
-
StickerFab [15-17 WRX/STI] S207 Style Lower Bumper Overlay
$22.99Ships from mfr
-
StickerFab [15-21 WRX/STI] 3D Carbon Fiber Vinyl Trunk Trim Overlay
$9.99Ships from mfr
-
StickerFab [18-21 WRX/STI] Japanese Style Grille Pinstripe
$14.99Ships from mfr
-
StickerFab [15-17 WRX/STI] 2018 Style Bumper Overlay Upper and Lower
$16.99Ships from mfr
-
StickerFab [15-21 WRX/STI, 15-17 Crosstrek, 15-16 Impreza] 3D Carbon Fiber Lower Mirror Overlays (Pair)
$15.99Ships from mfr
-
StickerFab [15-17 WRX/STI] S207 JDM Style Grille Pinstripe
$18.99Ships from mfr
-
StickerFab [15-21 WRX/STI] JDM S207 Style 3D Carbon Side Skirt Overlay
$22.99Ships from mfr
Fitment
Fitment
- 2015–2021 Subaru | WRX STI
- 2015–2021 Subaru | WRX
Description
Description
- Premium 3D carbon fiber VINYL overlay — a deep, textured carbon-look vinyl film, not a hard plastic or real carbon part
- Protects a damage-prone panel — shields the factory trim from scuffs, scratches, and everyday wear while adding a carbon look
- Precision-cut to fit — made to match the factory contour for a clean, low-profile look
- Forgiving install — heat- and pressure-activated adhesive for a clean, low-stress application
- Made in the USA — cut to order by StickerFab in Fort Myers, FL from premium US/Euro-sourced vinyl
- Fits 2015-2021 WRX / STI — precision-cut for a clean, factory-look fit
3D Carbon Seatbelt / Pillar Panel Protection Kit (Scuff Guard) - 2015-2021 WRX / STI
Protect a scuff-prone factory trim panel and add a deep, textured carbon look — with a premium 3D carbon fiber vinyl overlay, precision-cut to order by StickerFab in Fort Myers, FL for the 2015-2021 WRX / STI.

Just so it's clear: "3D Carbon Fiber" is our name for a premium textured vinyl film — a flexible carbon-look overlay that conforms to your trim. It is not real carbon fiber and it's not a hard replacement part. You get the rich 3D carbon look (and scuff protection) at a fraction of the cost of a hard part.
Protects a Piece That Takes a BeatingFactory soft-touch plastics and trim panels scuff and scratch far too easily. This overlay takes the abuse for you — it shields the trim underneath from everyday wear while giving it a deep, textured 3D carbon-fiber appearance. You protect the panel and upgrade the look in one step. |
Premium Vinyl, Made in the USAEach piece is cut to order from premium 3D carbon fiber vinyl — the same high-standard film we use across our overlays, sourced from US and European suppliers. It's durable, dimensionally stable, and built to last for years. Cut and shipped from our shop in Fort Myers, Florida — a real product made by real people, made to order. |
![]() |
Not All Materials Are Created EqualOur 3D Carbon is Dragon Wrap™ Carbon Fiber Film — a 5.6 mil calendered vinyl with a repositionable permanent adhesive on an air-egress liner. Excellent dimensional stability, up to 5-year outdoor durability, and rated excellent for water, humidity, and solvent resistance. Review below is from a StickerFab customer about a different 3D Carbon product made from this same premium material — shared to speak to the material quality, not this specific item. "Got them just now, thanks for including a(n) extra set! I've had 2 sets of CF look ones from another seller and silver stars kept peeling and the carbon look faded really bad." — StickerFab customer |
🔧 Installation
Minimum application temperature is 40°F. We recommend a dry install: clean the surface so it's free of any residue or protectants (like Armor All), apply the piece, and press it down firmly. The adhesive activates with heat and pressure, so light heat from a hair dryer or heat gun helps it conform.
For the 3D Carbon material, do not wax it. Clean with normal soap and water.
FAQ
|
Is this real carbon fiber? |
Will it fit my car? |
|
Is it hard to install? |
How do I care for it? |
|
Is this made in the USA? |
Shipping and Delivery
Shipping and Delivery
Review our Shipping Policy for delivery details, shipping costs and exclusions.
Warranty and Support
Warranty and Support
Return and Refund
Return and Refund
Eligibility, exclusions, applicable fees and exceptions are detailed in our Return Policy. Restrictions apply to special-order and custom products.
Proposition 65
Proposition 65
Proposition 65 Warnings: cancer and reproductive harm www.p65warnings.ca.gov
![StickerFab [15-21 WRX/STI] 3D Carbon Seatbelt / Pillar Panel Protection Kit (Scuff Guard)](http://jdmuscleusa.com/cdn/shop/files/3d-carbon-seatbelt-pillar-panel-protection-kit-scuff-guard-2015-2021-wrx-sti-stickerfab-5.jpg?v=1792787115&width=1445)
