ID1300x Fuel Injectors Set of 4

• 2013-2016 Scion | FR-S
• 2013-2020 Subaru | BRZ
• 2017-2020 Toyota | 86

The ID1300x was designed with Bosch Motorsport specifically for alternative-fuel performance builds. It has all stainless internals, so it stands up to the corrosive nature of alcohol fuels, while its minimum fuel mass stays low enough for clean idle and cruise behavior when the car is run on gasoline. This four-injector set is the 36 mm version with 11 mm machined tops for the Subaru BRZ (2013 and up), Scion FR-S (2013-2016) and Toyota 86 (2017 and up) with the FA20 engine.

• Part number: 1300.18.04.36.11.4
• Set of 4 ID1300x injectors, 11 mm machined tops
• Clips and pins included
• Nominal flow rate: 1340 cc/min at 3.0 bar (43.5 psi) using Iso Octane at 52 degrees C
• Maximum differential fuel pressure: 6.0 bar (87 psi)
• Compatible with all known fuels; all stainless internals, designed specifically for alternative fuels
• Electrical connector: USCAR
• Full dynamic characterization data is supplied for ECU calibration

Review our Shipping Policy for delivery details, shipping costs and exclusions.

Eligibility, exclusions, applicable fees and exceptions are detailed in our Return Policy. Restrictions apply to special-order and custom products.

Proposition 65 Warnings: cancer and reproductive harm www.p65warnings.ca.gov