{"title":"Sparco","description":"\u003cp\u003e\u003cstrong\u003eThe best racing seat setup for your WRX is one that fits your chassis and your seat — and Sparco is the benchmark name in motorsport seating.\u003c\/strong\u003e Sparco builds FIA-homologated racing seats, harnesses, seat bases, and track hardware trusted everywhere from club track days to top-level racing. This collection covers the pieces that mount the seat to the car — vehicle-specific seat bases, seat tracks, and street harnesses — so you can check your year and model and build a proper driving position.\u003c\/p\u003e\n\u003cp\u003eA seat is only as good as its mounting. Sparco seat bases bolt to your factory floor mounting points and position the seat at the right height and angle, while seat tracks add fore-aft adjustability for shared or daily-driven cars. Street bolt-in harnesses like the 4-point units here work with factory belt anchors on many cars for track days without a roll bar — check your sanctioning body's rules before hitting the track.\u003c\/p\u003e\n\u003cp\u003eComplete your cockpit with \u003ca href=\"\/collections\/interior\"\u003eAuto Interior\u003c\/a\u003e parts, a \u003ca href=\"\/collections\/steering-wheels\"\u003eSteering Wheels\u003c\/a\u003e upgrade, and \u003ca href=\"\/collections\/shift-knobs\"\u003eShift Knobs\u003c\/a\u003e for the full driver-focused setup. Popular Sparco picks include the \u003ca href=\"https:\/\/jdmuscleusa.com\/products\/sparco-drivers-side-seat-base-subaru-wrx-sti-2015-2019\"\u003eSparco Driver Side Seat Base for 15-21 WRX\/STI\u003c\/a\u003e and the matching \u003ca href=\"https:\/\/jdmuscleusa.com\/products\/sparco-passenger-side-seat-base-subaru-wrx-sti-2015-2019\"\u003ePassenger Side Seat Base\u003c\/a\u003e, the \u003ca href=\"https:\/\/jdmuscleusa.com\/products\/sparco-street-bolt-in-harness-black-2-inch-4pt-universal\"\u003eSparco Street Bolt-In 4-Point Harness\u003c\/a\u003e, and the \u003ca href=\"https:\/\/jdmuscleusa.com\/products\/sparco-seat-track-set-flat\"\u003eSparco Seat Track Set\u003c\/a\u003e. Building a track car? Read \u003ca href=\"\/blogs\/news\/track-ready-power-high-performance-upgrades-for-the-2022-wrx-sti\"\u003eTrack-Ready Power: High-Performance Upgrades for the 2022 WRX STI\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eDo Sparco seat bases fit my car?\u003c\/h3\u003e\n\u003cp\u003eSeat bases are vehicle-specific — the ones in this collection include bases for the 15-21 WRX and STI, the 92-95 Honda Civic, and the 90-99 Toyota MR2, plus universal track sets. Always confirm your year and model on the product page.\u003c\/p\u003e\n\u003ch3\u003eIs a harness safe for street use?\u003c\/h3\u003e\n\u003cp\u003eStreet bolt-in harnesses are designed to work with factory anchors, but rules vary: some track organizations restrict harness use without a roll bar or proper harness bar. Check your event's rulebook before buying.\u003c\/p\u003e\n\u003ch3\u003eHow hard is it to install a seat base?\u003c\/h3\u003e\n\u003cp\u003eSeat base installs are bolt-on work with basic hand tools — unbolt the factory seat, bolt the base to the floor, and mount the seat to the base. Torque specs and any airbag-light considerations are covered on the product page for the listed applications.\u003c\/p\u003e\n\u003ch3\u003eDo I need a tune after changing seats or harnesses?\u003c\/h3\u003e\n\u003cp\u003eNo. Seating and harness upgrades do not touch engine management, so no tune is required — just proper mounting and torque.\u003c\/p\u003e","products":[{"product_id":"sparco-street-bolt-in-harness-black-2-inch-4pt-universal","title":"Sparco Street Bolt-In Harness Black 2 Inch 4PT - Universal","description":"\u003cp\u003eThe Sparco Street Bolt-In Harness is a 4-point street harness with 2 inch straps for weekend racers and hobbyists. Crafted from high-quality fabric and fitted with durable fasteners, this harness restrains the body for added safety and protection, and each strap attaches in the center via a durable quick-release fastener.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 04604BV1NR\u003c\/li\u003e\n\u003cli\u003e2 inch lap and shoulder belts\u003c\/li\u003e\n\u003cli\u003eDurable fastener joins all straps in the center of the body\u003c\/li\u003e\n\u003cli\u003eBolt-on installation - the straps bolt to the frame\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eSparco safety harnesses are intended for racing vehicles. Harnesses are not applicable nor intended for street or highway use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this harness fit my vehicle?\u003c\/strong\u003e This is a universal-fit 4-point harness and is not specific to one vehicle. Verify compatibility before purchase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The box includes one Sparco 4-point street harness with 2 inch lap and shoulder belts and a center quick-release fastener.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e It is a bolt-on installation - the straps bolt to the frame and join in the center via the quick-release fastener.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132853502054,"sku":"spa04604BV1NR","price":145.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-street-bolt-in-harness-black-2-inch-4pt-universal-harnesses-sparco-04604bvnr.jpg?v=1614522707"},{"product_id":"sparco-shift-knob-piuma-black-universal","title":"Sparco Shift Knob Piuma Black - Universal","description":"\u003cp\u003eThe Sparco Piuma Shift Knob in black is a universal aluminum shift knob. The counter-sunk rivet design sheds weight and helps increase grip, and each knob is engraved with the Sparco logo.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 03741BN01\u003c\/li\u003e\n\u003cli\u003eAluminum construction\u003c\/li\u003e\n\u003cli\u003eLightweight design\u003c\/li\u003e\n\u003cli\u003eCounter-sunk rivet design adds grip and reduces weight\u003c\/li\u003e\n\u003cli\u003eEngraved with the Sparco logo\u003c\/li\u003e\n\u003cli\u003eColour: Black - also available in silver\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this shift knob fit my vehicle?\u003c\/strong\u003e This is a universal-fit shift knob and is not specific to one vehicle. Verify compatibility before purchase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The box includes one Sparco Piuma shift knob in black.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The knob is a universal fitment product and may require some modification for proper installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132854222950,"sku":"spa03741BN01","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-shift-knob-piuma-black-universal-shift-knobs-sparco-03741bn01.jpg?v=1614522721"},{"product_id":"sparco-3in-racing-belt-pad-universal","title":"Sparco 3 Inch Racing Belt Pad - Universal","description":"\u003cp\u003eThe Sparco 3 Inch Racing Belt Pad is a 3 inch pad designed specifically for Sparco Competition Harnesses. The Sparco Racing Harness Pads add comfort and style to your interior.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: 01098S3N (Black), 01098S3A (Blue), 01098S3R (Red)\u003c\/li\u003e\n\u003cli\u003e3 inch pad designed specifically for Sparco Competition Harnesses\u003c\/li\u003e\n\u003cli\u003eAdds comfort and style to the interior\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this belt pad fit my harness?\u003c\/strong\u003e This 3 inch pad is designed specifically for Sparco Competition Harnesses. Verify compatibility before purchase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The box includes the Sparco 3 inch racing belt pad in the selected colour.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The pad is a universal fitment product for Sparco Competition Harnesses and may require some modification for proper installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Black","offer_id":31132856909926,"sku":"spa01098S3N","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":31132856942694,"sku":"spa01098S3A","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":31132856975462,"sku":"spa01098S3R","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-3in-racing-belt-pad-universal-harnesses-sparco-black-01098s3n.jpg?v=1614522739"},{"product_id":"sparco-passenger-side-seat-base-subaru-wrx-sti-2015-2019","title":"Sparco [15-21 WRX\/STI] Passenger Side Seat Base","description":"\u003cp\u003ePassenger-side 600 Series seat base for the 2015-2021 Subaru WRX and WRX STI. It bolts to the factory floor mounting points and provides a flat mounting surface with a Sparco-specific pattern so the seat lines up properly in the car.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 600SB206R\u003c\/li\u003e\n\u003cli\u003eFitment: 2015-2021 Subaru WRX \/ WRX STI, passenger side (right)\u003c\/li\u003e\n\u003cli\u003e600 Series steel construction with black wrinkle powder-coat finish\u003c\/li\u003e\n\u003cli\u003eReclining seats can bolt directly to this base or be used with a set of sliders\u003c\/li\u003e\n\u003cli\u003eFixed-back seats may require side mounts, depending on the seat\u003c\/li\u003e\n\u003cli\u003eMounting hardware, track set \/ sliders and side mounts are sold separately where required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132857172070,"sku":"spa600SB206R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-passenger-side-seat-base-subaru-wrx-sti-2015-2019-seat-mounting-sparco-600sb206r.jpg?v=1614522743"},{"product_id":"sparco-drivers-side-seat-base-subaru-wrx-sti-2015-2019","title":"Sparco [15-21 WRX\/STI] Seat Base Driver Side","description":"\u003cp\u003eThe Sparco Seat Base Driver Side is a seat base for the 2015-2021 Subaru WRX and WRX STI. The Sparco seat base allows you to bolt a Sparco seat into your car - it bolts into the factory location and gives a Sparco specific mounting pattern so that your seats line up properly.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB206L\u003c\/li\u003e\n\u003cli\u003eDriver side (left) seat base\u003c\/li\u003e\n\u003cli\u003eBolts into the factory location\u003c\/li\u003e\n\u003cli\u003eSparco specific mounting pattern so the seat lines up properly\u003c\/li\u003e\n\u003cli\u003eReclining seats are able to bolt directly to this base, or to a set of sliders\u003c\/li\u003e\n\u003cli\u003eFixed back seats may require a set of side mounts (depends on the seat) to mount to this base properly\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my WRX or WRX STI?\u003c\/strong\u003e Yes. This driver side seat base is designed for the 2015-2021 Subaru WRX and WRX STI.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The box includes one driver side Sparco seat base for the 2015-2021 Subaru WRX and WRX STI.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts into the factory location. Reclining seats bolt directly to the base or to a set of sliders, and fixed back seats may require a set of side mounts depending on the seat.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132857237606,"sku":"spa600SB206L","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-drivers-side-seat-base-subaru-wrx-sti-2015-2019-seat-mounting-sparco-600sb206l.jpg?v=1614522744"},{"product_id":"sparco-r-215-competition-suede-steering-wheel-universal","title":"Sparco R 215 Competition Suede Steering Wheel - Universal","description":"\u003cp\u003eThe Sparco R 215 Competition Suede Steering Wheel is a universal steering wheel designed to improve grip and comfort for driving precision. Sparco steering wheels are available in different diameters, depths, and materials to satisfy every driving situation from street to track.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 015R215CSN\u003c\/li\u003e\n\u003cli\u003eDiameter: 350mm\u003c\/li\u003e\n\u003cli\u003eDish (depth front to back): 90mm\u003c\/li\u003e\n\u003cli\u003eCover material: suede\u003c\/li\u003e\n\u003cli\u003eYellow leather centering stripe\u003c\/li\u003e\n\u003cli\u003eUnique 2 spoke design\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this steering wheel fit my vehicle?\u003c\/strong\u003e This is a universal-fit steering wheel and is not specific to one vehicle. Verify compatibility and hub requirements before purchase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The box includes one Sparco R 215 steering wheel with a suede cover and a yellow leather centering stripe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The wheel is a universal fitment product and may require some modification for proper installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132857270374,"sku":"spa015R215CSN","price":285.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-r-215-competition-suede-steering-wheel-universal-steering-wheels-sparco-015r215csn.jpg?v=1614522745"},{"product_id":"sparco-r-345-competition-suede-steering-wheel","title":"Sparco [Universal] R 345 Competition Suede Steering Wheel","description":"\u003cp\u003eThe Sparco R 345 Competition Suede Steering Wheel is a universal competition steering wheel designed to improve grip and comfort for driving precision. This suede steering wheel has a 350mm diameter and a 63mm dish (depth front to back), with a yellow leather centering stripe.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDiameter: 350mm\u003c\/li\u003e\n\u003cli\u003eDish (depth front to back): 63mm\u003c\/li\u003e\n\u003cli\u003eCover material: Suede\u003c\/li\u003e\n\u003cli\u003eYellow leather centering stripe\u003c\/li\u003e\n\u003cli\u003ePart number: 015R345MSN\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a universal fitment product and is non application specific. Verify compatibility before purchase. Installation may require some modification for proper installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is this steering wheel vehicle-specific?\u003c\/strong\u003e\u003cbr\u003eA: No. This is a universal fitment steering wheel and is non application specific, so verify compatibility before purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: One Sparco R 345 Competition Suede Steering Wheel steering wheel is included. Part number 015R345MSN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What are the diameter and dish measurements?\u003c\/strong\u003e\u003cbr\u003eA: The diameter is 350mm and the dish (depth front to back) is 63mm.\u003c\/p\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132857303142,"sku":"spa015R345MSN","price":285.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-r-345-competition-suede-steering-wheel-universal-steering-wheels-sparco-015r345msn.jpg?v=1614522747"},{"product_id":"sparco-600-series-right-side-seat-base-1991-2002-saturn-s-series","title":"Sparco [91-02 Saturn S Series] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series Right Side Seat Base for the 1991-2002 Saturn S Series provides a flat surface for mounting a Sparco seat using the factory seat mounts on the vehicle's floor. All Sparco seat bases are vehicle specific and provide a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eRight side seat base — one base required per seat\u003c\/li\u003e\n\u003cli\u003ePart number: 600SB083R\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor a bottom mount seat (Street Series seats), one of each of the following is needed per seat: Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001). For a side mount seat (Competition Series seats), one of each of the following is needed per seat: Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002). The Track Set allows for forward and backward adjustment of the seat. Bases may differ from photo due to make\/model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this seat base fit my 1991-2002 Saturn S Series?\u003c\/strong\u003e\u003cbr\u003eA: Yes. This 600 Series seat base is vehicle specific for the 1991-2002 Saturn S Series and provides a 100% bolt-in installation using the factory seat mounts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: One Sparco 600 Series Right Side Seat Base is included. Part number 600SB083R.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What else is needed to install a Sparco seat?\u003c\/strong\u003e\u003cbr\u003eA: Per seat, a bottom mount seat also requires a Track Set (#00493) and Bottom Mount Hardware Kit (#50001); a side mount seat also requires a Track Set (#00493), a Side Mount (steel #004902 or aluminum #600W), and a Side Mount Hardware Kit (#50002).\u003c\/p\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132857892966,"sku":"spa600SB083R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1991-2002-saturn-s-series-seat-mounting-sparco-600sb083r.jpg?v=1614522748"},{"product_id":"sparco-r-325-competition-suede-steering-wheel-universal","title":"Sparco [Universal] R 325 Competition Suede Steering Wheel","description":"\u003cp\u003eThe Sparco R 325 Competition Suede Steering Wheel is a universal competition steering wheel designed to improve grip and comfort for driving precision. This suede steering wheel has a 350mm diameter and a 95mm dish (depth front to back), with a yellow leather centering stripe.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDiameter: 350mm\u003c\/li\u003e\n\u003cli\u003eDish (depth front to back): 95mm\u003c\/li\u003e\n\u003cli\u003eCover material: Suede\u003c\/li\u003e\n\u003cli\u003eYellow leather centering stripe\u003c\/li\u003e\n\u003cli\u003ePart number: 015R325CSN\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a universal fitment product and is non application specific. Verify compatibility before purchase. Installation may require some modification for proper installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is this steering wheel vehicle-specific?\u003c\/strong\u003e\u003cbr\u003eA: No. This is a universal fitment steering wheel and is non application specific, so verify compatibility before purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: One Sparco R 325 Competition Suede Steering Wheel steering wheel is included. Part number 015R325CSN.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What are the diameter and dish measurements?\u003c\/strong\u003e\u003cbr\u003eA: The diameter is 350mm and the dish (depth front to back) is 95mm.\u003c\/p\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132857958502,"sku":"spa015R325CSN","price":285.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-r-325-competition-suede-steering-wheel-universal-steering-wheels-sparco-015r325csn.jpg?v=1614522749"},{"product_id":"sparco-600-series-right-side-seat-base-1998-2002-honda-accord","title":"Sparco [98-02 Honda Accord] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series Right Side Seat Base for the 1998-2002 Honda Accord provides a flat surface for mounting a Sparco seat using the factory seat mounts on the vehicle's floor. All Sparco seat bases are vehicle specific and provide a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eRight side seat base — one base required per seat\u003c\/li\u003e\n\u003cli\u003ePart number: 600SB064R\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor a bottom mount seat (Street Series seats), one of each of the following is needed per seat: Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001). For a side mount seat (Competition Series seats), one of each of the following is needed per seat: Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002). The Track Set allows for forward and backward adjustment of the seat. Bases may differ from photo due to make\/model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this seat base fit my 1998-2002 Honda Accord?\u003c\/strong\u003e\u003cbr\u003eA: Yes. This 600 Series seat base is vehicle specific for the 1998-2002 Honda Accord and provides a 100% bolt-in installation using the factory seat mounts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: One Sparco 600 Series Right Side Seat Base is included. Part number 600SB064R.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What else is needed to install a Sparco seat?\u003c\/strong\u003e\u003cbr\u003eA: Per seat, a bottom mount seat also requires a Track Set (#00493) and Bottom Mount Hardware Kit (#50001); a side mount seat also requires a Track Set (#00493), a Side Mount (steel #004902 or aluminum #600W), and a Side Mount Hardware Kit (#50002).\u003c\/p\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132858286182,"sku":"spa600SB064R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1998-2002-honda-accord-seat-mounting-sparco-600sb064r.jpg?v=1614522752"},{"product_id":"sparco-600-series-right-side-seat-base-1994-2001-acura-integra","title":"Sparco [94-01 Acura Integra] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series Right Side Seat Base for the 1994-2001 Acura Integra provides a flat surface for mounting a Sparco seat using the factory seat mounts on the vehicle's floor. All Sparco seat bases are vehicle specific and provide a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eRight side seat base — one base required per seat\u003c\/li\u003e\n\u003cli\u003ePart number: 600SB031R\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor a bottom mount seat (Street Series seats), one of each of the following is needed per seat: Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001). For a side mount seat (Competition Series seats), one of each of the following is needed per seat: Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002). The Track Set allows for forward and backward adjustment of the seat. Bases may differ from photo due to make\/model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this seat base fit my 1994-2001 Acura Integra?\u003c\/strong\u003e\u003cbr\u003eA: Yes. This 600 Series seat base is vehicle specific for the 1994-2001 Acura Integra and provides a 100% bolt-in installation using the factory seat mounts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: One Sparco 600 Series Right Side Seat Base is included. Part number 600SB031R.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What else is needed to install a Sparco seat?\u003c\/strong\u003e\u003cbr\u003eA: Per seat, a bottom mount seat also requires a Track Set (#00493) and Bottom Mount Hardware Kit (#50001); a side mount seat also requires a Track Set (#00493), a Side Mount (steel #004902 or aluminum #600W), and a Side Mount Hardware Kit (#50002).\u003c\/p\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132858351718,"sku":"spa600SB031R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1994-2001-acura-integra-seat-mounting-sparco-600sb031r.jpg?v=1614522754"},{"product_id":"sparco-600-series-right-side-seat-base-1992-2002-mazda-rx-7","title":"Sparco [93-95 Mazda RX-7] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series Right Side Seat Base for the 1993-1995 Mazda RX-7 provides a flat surface for mounting a Sparco seat using the factory seat mounts on the vehicle's floor. All Sparco seat bases are vehicle specific and provide a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eRight side seat base — one base required per seat\u003c\/li\u003e\n\u003cli\u003ePart number: 600SB090R\u003c\/li\u003e\n\u003cli\u003eOfficial Sparco USA application: MAZDA RX7 92-02 RT. US title years are 1993-1995 (US FD RX-7).\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor a bottom mount seat (Street Series seats), one of each of the following is needed per seat: Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001). For a side mount seat (Competition Series seats), one of each of the following is needed per seat: Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002). The Track Set allows for forward and backward adjustment of the seat. Bases may differ from photo due to make\/model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this seat base fit my 1993-1995 Mazda RX-7?\u003c\/strong\u003e\u003cbr\u003eA: Yes. This 600 Series seat base is vehicle specific for the 1993-1995 Mazda RX-7 and provides a 100% bolt-in installation using the factory seat mounts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: One Sparco 600 Series Right Side Seat Base is included. Part number 600SB090R.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What else is needed to install a Sparco seat?\u003c\/strong\u003e\u003cbr\u003eA: Per seat, a bottom mount seat also requires a Track Set (#00493) and Bottom Mount Hardware Kit (#50001); a side mount seat also requires a Track Set (#00493), a Side Mount (steel #004902 or aluminum #600W), and a Side Mount Hardware Kit (#50002).\u003c\/p\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132858482790,"sku":"spa600SB090R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1992-2002-mazda-rx-7-seat-mounting-sparco-600sb090r.jpg?v=1614522755"},{"product_id":"sparco-aluminum-side-mount-universal","title":"Sparco [Universal] Aluminum Side Mount","description":"\u003cp\u003eSparco Aluminum Side Mounts are universal side mounts used to mount competition seats. Side mounts have multiple side holes that provide a customizable mounting position, and this side mount is all aluminum construction available in anodized black only.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAll aluminum construction, anodized black only\u003c\/li\u003e\n\u003cli\u003eMultiple side holes provide a customizable mounting position\u003c\/li\u003e\n\u003cli\u003eFor competition seats\u003c\/li\u003e\n\u003cli\u003eUniversal fitment — non application specific\u003c\/li\u003e\n\u003cli\u003ePart number: 600W\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eVerify compatibility before purchase. Installation may require some modification for proper installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is this side mount vehicle-specific?\u003c\/strong\u003e\u003cbr\u003eA: No. This is a universal fitment product and is non application specific, so verify compatibility before purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: One Sparco Aluminum Side Mount set is included. Part number 600W.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What material is this side mount made from?\u003c\/strong\u003e\u003cbr\u003eA: It is all aluminum construction and is available in anodized black only.\u003c\/p\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132859531366,"sku":"spa600W","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-aluminum-side-mount-universal-seat-sliders-accessories-sparco-600w.jpg?v=1614522760"},{"product_id":"sparco-600-series-right-side-seat-base-2003-2009-nissan-350z-6-speed","title":"Sparco [03-08 Nissan 350Z] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2003-2008 Nissan 350Z. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB015R\u003c\/li\u003e\n\u003cli\u003eOfficial Sparco USA application: NISSAN 350Z 03-08 RT MANU. Official six-speed variant is a different part, 600SB015LOWR. Store SKU 600SB015R was not changed.\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2003-2008 Nissan 350Z — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Nissan 350Z?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2003-2008 Nissan 350Z. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB015R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132860645478,"sku":"spa600SB015R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2003-2009-nissan-350z-6-speed-seat-mounting-sparco-600sb015r.jpg?v=1614522762"},{"product_id":"sparco-600-series-right-side-seat-base-1992-1995-honda-civic","title":"Sparco [92-95 Honda Civic] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1992-1995 Honda Civic. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB041R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1992-1995 Honda Civic — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Honda Civic?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1992-1995 Honda Civic. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB041R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132860678246,"sku":"spa600SB041R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1992-1995-honda-civic-seat-mounting-sparco-600sb041r.jpg?v=1614522763"},{"product_id":"sparco-600-series-right-side-seat-base-2000-2007-mercedes-c-class-sedan-w203","title":"Sparco [00-07 Mercedes C-Class Sedan W203] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2000-2007 Mercedes C-Class Sedan (W203). It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB157R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2000-2007 Mercedes C-Class Sedan (W203) — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Mercedes C-Class Sedan (W203)?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2000-2007 Mercedes C-Class Sedan (W203). It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB157R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132861792358,"sku":"spa600SB157R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2000-2007-mercedes-c-class-sedan-w203-seat-mounting-sparco-600sb157r.jpg?v=1614522766"},{"product_id":"sparco-600-series-right-side-seat-base-1990-1999-toyota-mr2","title":"Sparco [91-95 Toyota MR2] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1991-1995 Toyota MR2. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB057R\u003c\/li\u003e\n\u003cli\u003eOfficial Sparco USA application: TOYOTA MR2 90-99 RT W20. US title years are 1991-1995 (US SW20).\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1991-1995 Toyota MR2 — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Toyota MR2?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1991-1995 Toyota MR2. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB057R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132861956198,"sku":"spa600SB057R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1990-1999-toyota-mr2-seat-mounting-sparco-600sb057r.jpg?v=1614522766"},{"product_id":"sparco-600-series-right-side-seat-base-2009-2013-fiat-500","title":"Sparco [12-19 Fiat 500] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2012-2019 Fiat 500. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB099R\u003c\/li\u003e\n\u003cli\u003eOfficial Sparco USA application: FIAT 500 09+ RT. US title years are 2012-2019. Official no-woofer variant is a different part, 600SB099.1R.\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2012-2019 Fiat 500 — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Fiat 500?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2012-2019 Fiat 500. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB099R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132862054502,"sku":"spa600SB099R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2009-2013-fiat-500-seat-mounting-sparco-600sb099r.jpg?v=1614522767"},{"product_id":"sparco-600-series-right-side-seat-base-1993-1998-toyota-supra","title":"Sparco [93-98 Toyota Supra] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1993-1998 Toyota Supra. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB023R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1993-1998 Toyota Supra — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Toyota Supra?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1993-1998 Toyota Supra. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB023R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132862283878,"sku":"spa600SB023R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1993-1998-toyota-supra-seat-mounting-sparco-600sb023r.jpg?v=1614522768"},{"product_id":"sparco-600-series-right-side-seat-base-1996-2000-honda-civic","title":"Sparco [96-00 Honda Civic] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1996-2000 Honda Civic. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB042R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1996-2000 Honda Civic — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Honda Civic?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1996-2000 Honda Civic. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB042R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132863529062,"sku":"spa600SB042R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1996-2000-honda-civic-seat-mounting-sparco-600sb042r.jpg?v=1614522769"},{"product_id":"sparco-600-series-right-side-seat-base-1984-1989-toyota-mr2","title":"Sparco [84-89 Toyota MR2] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1984-1989 Toyota MR2. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB177R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1984-1989 Toyota MR2 — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Toyota MR2?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1984-1989 Toyota MR2. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB177R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132863758438,"sku":"spa600SB177R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1984-1989-toyota-mr2-seat-mounting-sparco-600sb177r.jpg?v=1614522771"},{"product_id":"sparco-600-series-right-side-seat-base-2009-2014-nissan-370z","title":"Sparco [09-20 Nissan 370Z] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2009-2020 Nissan 370Z. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB096R\u003c\/li\u003e\n\u003cli\u003eOfficial Sparco USA application: NISSAN 370Z 08+ RT. US title years are 2009-2020.\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2009-2020 Nissan 370Z — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Nissan 370Z?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2009-2020 Nissan 370Z. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB096R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132864020582,"sku":"spa600SB096R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2009-2014-nissan-370z-seat-mounting-sparco-600sb096r.jpg?v=1614522773"},{"product_id":"sparco-600-series-right-side-seat-base-2007-toyota-fj-cruiser","title":"Sparco [07-14 Toyota FJ Cruiser] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2007-2014 Toyota FJ Cruiser. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB022R\u003c\/li\u003e\n\u003cli\u003eOfficial Sparco USA application: TOYOTA FJ CRUISER 07-14 R. A separate official variant, 600SB022.1R, is also listed as 07-14 RT.\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2007-2014 Toyota FJ Cruiser — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Toyota FJ Cruiser?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2007-2014 Toyota FJ Cruiser. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB022R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132864184422,"sku":"spa600SB022R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2007-toyota-fj-cruiser-seat-mounting-sparco-600sb022r.jpg?v=1614522774"},{"product_id":"sparco-600-series-right-side-seat-base-1994-1999-toyota-celica","title":"Sparco [94-99 Toyota Celica] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1994-1999 Toyota Celica. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB162R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1994-1999 Toyota Celica — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Toyota Celica?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1994-1999 Toyota Celica. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB162R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132864249958,"sku":"spa600SB162R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1994-1999-toyota-celica-seat-mounting-sparco-600sb162r.jpg?v=1614522774"},{"product_id":"sparco-600-series-right-side-seat-base-2008-2014-subaru-wrx-sti","title":"Sparco [08-14 WRX\/STI] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2008-2014 Subaru WRX\/STI. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB020R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2008-2014 Subaru WRX\/STI — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my vehicle?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2008-2014 Subaru WRX\/STI. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB020R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132865232998,"sku":"spa600SB020R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2008-2014-subaru-wrx-sti-seat-mounting-sparco-600sb020r.jpg?v=1614522777"},{"product_id":"sparco-600-series-right-side-seat-base-1993-2007-subaru-impreza-wrx-sti","title":"Sparco [93-07 Impreza\/WRX\/STI] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1993-2007 Subaru Impreza \/ WRX \/ STI. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB019R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1993-2007 Subaru Impreza \/ WRX \/ STI — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my vehicle?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1993-2007 Subaru Impreza \/ WRX \/ STI. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB019R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132865298534,"sku":"spa600SB019R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1993-2007-subaru-impreza-wrx-sti-seat-mounting-sparco-600sb019r.jpg?v=1614522778"},{"product_id":"sparco-600-series-right-side-seat-base-2000-2006-nissan-sentra","title":"Sparco [00-06 Nissan Sentra, Maxima] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2000-2006 Nissan Sentra and Maxima. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB082R\u003c\/li\u003e\n\u003cli\u003eOfficial Sparco USA application: NISSAN SNTRA\/MXIMA  00-06 RT. One official part covers both Sentra and Maxima for 2000-2006.\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2000-2006 Nissan Sentra and Maxima — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my vehicle?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2000-2006 Nissan Sentra and Maxima. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB082R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132865527910,"sku":"spa600SB082R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2000-2006-nissan-sentra-seat-mounting-sparco-600sb082r.jpg?v=1614522779"},{"product_id":"sparco-600-series-right-side-seat-base-2005-2010-scion-tc","title":"Sparco [05-10 Scion tC] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2005-2010 Scion tC. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB084R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2005-2010 Scion tC — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my vehicle?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2005-2010 Scion tC. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB084R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132866510950,"sku":"spa600SB084R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2005-2010-scion-tc-seat-mounting-sparco-600sb084r.jpg?v=1614522782"},{"product_id":"sparco-600-series-right-side-seat-base-1991-2005-acura-nsx","title":"Sparco [91-05 Acura NSX] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1991-2005 Acura NSX. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB003R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1991-2005 Acura NSX — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my vehicle?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1991-2005 Acura NSX. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB003R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132866576486,"sku":"spa600SB003R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1991-2005-acura-nsx-seat-mounting-sparco-600sb003r.jpg?v=1614522783"},{"product_id":"sparco-600-series-right-side-seat-base-2004-2006-pontiac-gto","title":"Sparco [04-06 Pontiac GTO] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2004-2006 Pontiac GTO. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB016R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2004-2006 Pontiac GTO — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my vehicle?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2004-2006 Pontiac GTO. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB016R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132866871398,"sku":"spa600SB016R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2004-2006-pontiac-gto-seat-mounting-sparco-600sb016r.jpg?v=1614522785"},{"product_id":"sparco-600-series-right-side-seat-base-1982-1992-pontiac-firebird-trans-am","title":"Sparco [82-92 Pontiac Firebird\/Trans Am] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1982-1992 Pontiac Firebird \/ Trans Am. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB140R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1982-1992 Pontiac Firebird \/ Trans Am — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my vehicle?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1982-1992 Pontiac Firebird \/ Trans Am. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB140R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132866904166,"sku":"spa600SB140R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1982-1992-pontiac-firebird-trans-am-seat-mounting-sparco-600sb140r.jpg?v=1614522786"},{"product_id":"sparco-600-series-right-side-seat-base-2000-2006-nissan-maxima","title":"Sparco [00-06 Nissan Sentra, Maxima] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2000-2006 Nissan Sentra and Maxima. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB082R\u003c\/li\u003e\n\u003cli\u003eOfficial Sparco USA application: NISSAN SNTRA\/MXIMA  00-06 RT. One official part covers both Sentra and Maxima for 2000-2006.\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2000-2006 Nissan Sentra and Maxima — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my vehicle?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2000-2006 Nissan Sentra and Maxima. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB082R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132866936934,"sku":"spa600SB082R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2000-2006-nissan-maxima-seat-mounting-sparco-600sb082r.jpg?v=1614522787"},{"product_id":"sparco-600-series-right-side-seat-base-1989-1994-mitsubishi-eclipse-eagle-talon","title":"Sparco [89-94 Mitsubishi Eclipse\/Eagle Talon] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1989-1994 Mitsubishi Eclipse \/ Eagle Talon. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB048R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1989-1994 Mitsubishi Eclipse \/ Eagle Talon — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my vehicle?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1989-1994 Mitsubishi Eclipse \/ Eagle Talon. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB048R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132867297382,"sku":"spa600SB048R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1989-1994-mitsubishi-eclipse-eagle-talon-seat-mounting-sparco-600sb048r.jpg?v=1614522788"},{"product_id":"sparco-600-series-right-side-seat-base-1986-1991-mazda-rx-7","title":"Sparco [86-91 Mazda RX-7] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1986-1991 Mazda RX-7. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB115R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1986-1991 Mazda RX-7 — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my vehicle?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1986-1991 Mazda RX-7. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB115R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132867428454,"sku":"spa600SB115R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1986-1991-mazda-rx-7-seat-mounting-sparco-600sb115r.jpg?v=1614522790"},{"product_id":"sparco-600-series-right-side-seat-base-1998-2005-mazda-miata-na","title":"Sparco [99-05 Mazda Miata NB] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1999-2005 Mazda Miata NB. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB109R\u003c\/li\u003e\n\u003cli\u003eOfficial Sparco USA application: MAZDA MIATA NB 98-05 RT. US title years are 1999-2005 (US NB). Official NA 89-97 application is a different part, 600SB101.\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1999-2005 Mazda Miata NB — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my vehicle?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1999-2005 Mazda Miata NB. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB109R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132867526758,"sku":"spa600SB109R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1998-2005-mazda-miata-na-seat-mounting-sparco-600sb109r.jpg?v=1614522791"},{"product_id":"sparco-600-series-right-side-seat-base-2001-2005-lexus-is300","title":"Sparco [01-05 Lexus IS300] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2001-2005 Lexus IS300. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB012R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2001-2005 Lexus IS300 — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my vehicle?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2001-2005 Lexus IS300. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB012R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132867559526,"sku":"spa600SB012R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2001-2005-lexus-is300-seat-mounting-sparco-600sb012r.jpg?v=1614522792"},{"product_id":"sparco-600-series-right-side-seat-base-lexus-is250-is350-2006-2014","title":"Sparco [06-13 Lexus IS250 \/ IS350] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2006-2013 Lexus IS250 \/ IS350 (XE20). It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB092R\u003c\/li\u003e\n\u003cli\u003eOfficial Sparco USA application: LEXUS IS250\/350 06+ RT MAN. Official automatic variant is a different part, 600SB092.1R. Sparco does not list a separate XE30 or 2014+ IS base for this part, so the title uses 2006-2013 (XE20). Official 06+ is kept in the notes.\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2006-2013 Lexus IS250 \/ IS350 — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Lexus IS250 \/ IS350?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2006-2013 Lexus IS250 \/ IS350 (XE20). Official Sparco application is LEXUS IS250\/350 06+ RT MAN. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB092R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132867788902,"sku":"spa600SB092R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-lexus-is250-is350-2006-2014-seat-mounting-sparco-600sb092r.jpg?v=1614522792"},{"product_id":"sparco-600-series-right-side-seat-base-2007-2009-honda-s2000","title":"Sparco [07-09 Honda S2000] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2007-2009 Honda S2000. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB107R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2007-2009 Honda S2000 — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Honda S2000?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2007-2009 Honda S2000. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB107R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132867952742,"sku":"spa600SB107R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2007-2009-honda-s2000-seat-mounting-sparco-600sb107r.jpg?v=1614522797"},{"product_id":"sparco-600-series-right-side-seat-base-1992-1998-honda-del-sol","title":"Sparco [92-98 Honda Del Sol] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1992-1998 Honda Del Sol. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB174R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1992-1998 Honda Del Sol — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Honda Del Sol?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1992-1998 Honda Del Sol. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB174R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132868018278,"sku":"spa600SB174R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1992-1998-honda-del-sol-seat-mounting-sparco-600sb174r.jpg?v=1614522798"},{"product_id":"sparco-600-series-right-side-seat-base-2002-2005-honda-civic-si","title":"Sparco [02-05 Honda Civic SI] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2002-2005 Honda Civic SI. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB043R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2002-2005 Honda Civic SI — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Honda Civic SI?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2002-2005 Honda Civic SI. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB043R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132868051046,"sku":"spa600SB043R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2002-2005-honda-civic-si-seat-mounting-sparco-600sb043r.jpg?v=1614522799"},{"product_id":"sparco-600-series-right-side-seat-base-2012-honda-civic","title":"Sparco [12-15 Honda Civic] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2012-2015 Honda Civic. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB154R\u003c\/li\u003e\n\u003cli\u003eOfficial Sparco USA application: HONDA CIVIC 12-15 RT. Official 16+ 10th-gen Civic base is 600SB290; official 21+ Civic base is 600SB443.\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2012-2015 Honda Civic — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Honda Civic?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2012-2015 Honda Civic. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB154R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132868116582,"sku":"spa600SB154R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2012-honda-civic-seat-mounting-sparco-600sb154r.jpg?v=1614522800"},{"product_id":"sparco-600-series-right-side-seat-base-1994-1997-honda-accord","title":"Sparco [94-97 Honda Accord] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1994-1997 Honda Accord. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB047R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1994-1997 Honda Accord — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Honda Accord?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1994-1997 Honda Accord. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB047R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132868214886,"sku":"spa600SB047R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1994-1997-honda-accord-seat-mounting-sparco-600sb047r.jpg?v=1614522801"},{"product_id":"sparco-600-series-right-side-seat-base-2002-2006-acura-rsx","title":"Sparco [02-06 Acura RSX] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2002-2006 Acura RSX. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB032R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2002-2006 Acura RSX — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Acura RSX?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2002-2006 Acura RSX. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB032R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132870082662,"sku":"spa600SB032R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2002-2006-acura-rsx-seat-mounting-sparco-600sb032r.jpg?v=1614522814"},{"product_id":"sparco-600-series-right-side-seat-base-2000-2008-mercedes-c-class-coupe","title":"Sparco [00-08 Mercedes C Class Coupe] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2000-2008 Mercedes C Class Coupe. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB089R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2000-2008 Mercedes C Class Coupe — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Mercedes C Class Coupe?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2000-2008 Mercedes C Class Coupe. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB089R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132870148198,"sku":"spa600SB089R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2000-2008-mercedes-c-class-coupe-seat-mounting-sparco-600sb089r.jpg?v=1614522815"},{"product_id":"sparco-600-series-right-side-seat-base-1988-1989-honda-civic-hatch","title":"Sparco [88-89 Honda Civic Hatch] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1988-1989 Honda Civic Hatch. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB168R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1988-1989 Honda Civic Hatch — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Honda Civic Hatch?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1988-1989 Honda Civic Hatch. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB168R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132870246502,"sku":"spa600SB168R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1988-1989-honda-civic-hatch-seat-mounting-sparco-600sb168r.jpg?v=1614522817"},{"product_id":"sparco-600-series-right-side-seat-base-2011-2017-nissan-gt-r","title":"Sparco [11-16 Nissan GT-R] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2011-2016 Nissan GT-R. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB125R\u003c\/li\u003e\n\u003cli\u003eOfficial Sparco USA application: NISSAN GTR 11-16 RT. Official 2017+ application is a different part, 600SB312.\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2011-2016 Nissan GT-R — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Nissan GT-R?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2011-2016 Nissan GT-R. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB125R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132870312038,"sku":"spa600SB125R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2011-2017-nissan-gt-r-seat-mounting-sparco-600sb125r.jpg?v=1614522819"},{"product_id":"sparco-600-series-right-side-seat-base-2004-2008-acura-tsx","title":"Sparco [04-08 Acura TSX] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2004-2008 Acura TSX. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB178R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2004-2008 Acura TSX — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Acura TSX?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2004-2008 Acura TSX. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB178R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132871458918,"sku":"spa600SB178R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2004-2008-acura-tsx-seat-mounting-sparco-600sb178r.jpg?v=1614522820"},{"product_id":"sparco-600-series-right-side-seat-base-1996-2004-mercedes-slk","title":"Sparco [96-04 Mercedes SLK] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1996-2004 Mercedes SLK. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB117R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1996-2004 Mercedes SLK — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Mercedes SLK?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1996-2004 Mercedes SLK. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB117R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132871491686,"sku":"spa600SB117R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1996-2004-mercedes-slk-seat-mounting-sparco-600sb117r.jpg?v=1614522821"},{"product_id":"sparco-600-series-right-side-seat-base-2007-2011-nissan-sentra-1","title":"Sparco [07-11 Nissan Sentra] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 2007-2011 Nissan Sentra. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB106R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 2007-2011 Nissan Sentra — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Nissan Sentra?\u003c\/strong\u003e This is the right side 600 Series seat base for the 2007-2011 Nissan Sentra. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB106R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132872212582,"sku":"spa600SB106R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-2007-2011-nissan-sentra-seat-mounting-sparco-600sb106r.jpg?v=1614522824"},{"product_id":"sparco-600-series-right-side-seat-base-1992-2000-lexus-sc300-sc400","title":"Sparco [92-00 Lexus SC300\/SC400] 600 Series Right Side Seat Base","description":"\u003cp\u003eThe Sparco 600 Series seat base is a vehicle-specific seat mounting base for the 1992-2000 Lexus SC300 \/ SC400. It uses the factory seat mounts on the vehicle floor and provides a flat surface for mounting a Sparco seat, with a 100% bolt-in installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 600SB160R\u003c\/li\u003e\n\u003cli\u003eRight side seat base for the 1992-2000 Lexus SC300 \/ SC400 — one base is required per seat\u003c\/li\u003e\n\u003cli\u003eConstructed with 3\/16\" thick steel to provide a strong flex-free mount\u003c\/li\u003e\n\u003cli\u003ePowder coated in a black wrinkle finish\u003c\/li\u003e\n\u003cli\u003eWide metal platform allows custom mounting of side mounts direct to the base (drilling required) — an option for race vehicles where the lowest seat position is desired\u003c\/li\u003e\n\u003cli\u003eBottom mount seat (Street Series): requires Seat Base (600 series), Track Set (#00493), and Bottom Mount Hardware Kit (#50001), one of each per seat\u003c\/li\u003e\n\u003cli\u003eSide mount seat (Competition Series): requires Seat Base (600 series), Track Set (#00493), Side Mount (steel #004902 or aluminum #600W), and Side Mount Hardware Kit (#50002), one of each per seat\u003c\/li\u003e\n\u003cli\u003eThe Track Set allows for forward and backward adjustment of the seat\u003c\/li\u003e\n\u003cli\u003eBases may differ from photo due to make\/model\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Lexus SC300 \/ SC400?\u003c\/strong\u003e This is the right side 600 Series seat base for the 1992-2000 Lexus SC300 \/ SC400. It is vehicle specific and uses the factory seat mounts on the vehicle floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One right side Sparco 600 Series seat base (part number 600SB160R). The track set, side mounts and hardware kits listed above are required for a complete seat installation and are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is it installed?\u003c\/strong\u003e The base bolts in using the factory seat mounts and provides a flat mounting surface for the seat. Mounting side mounts directly to the base for the lowest seat position requires drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the base made of?\u003c\/strong\u003e The 600 Series base is constructed with 3\/16\" thick steel and is powder coated in a black wrinkle finish.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparco","offers":[{"title":"Default Title","offer_id":31132872474726,"sku":"spa600SB160R","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/sparco-600-series-right-side-seat-base-1992-2000-lexus-sc300-sc400-seat-mounting-sparco-600sb160r.jpg?v=1614522825"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/collections\/sparco-5821426.png?v=1770311930","url":"https:\/\/jdmuscleusa.com\/collections\/sparco.oembed?page=17","provider":"JDMuscle","version":"1.0","type":"link"}