{"title":"Performance Head Gaskets","description":null,"products":[{"product_id":"brian-crower-gaskets-87mm-bore-1-3mm-thick-toyota-2jzgte","title":"Brian Crower Gaskets  87mm Bore 1.3mm Thick Toyota 2JZGTE","description":"\u003cp\u003eBC gaskets are made in Japan and deliver the ultimate sealing capability even at extreme boost pressures. Individual die cut layers of stainless steel with superior consistency compared to other leading gaskets. These inferior brands are constructed with too high profile of beads which is prone to fatigue, losing the spring effect in a relatively short period of time and consistency of sealing pressure, resulting in leakage.\u003c\/p\u003e\n\u003cp\u003eBC gaskets are pre-coated stainless steel with a 0.2 micron consistent layer of Nitrile rubber that completely fills the cylinder head surface. Even a newly resurfaced cylinder head and\/or block has a surface finish or roughness between 10 to15 microns and this Nitrile rubber completely seals the surfaces at operating engine temperatures, unlike the FKM type which is not suitable for filling the surface roughness because the material has too high of heat resistance. Basically the FKM does not melt to fill into the surface roughness providing the proper seal.\u003c\/p\u003e","brand":"Brian Crower","offers":[{"title":"Default Title","offer_id":31125797470310,"sku":"BC8230","price":238.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/brian-crower-gaskets-87mm-bore-13mm-thick-toyota-2jzgte-head-gaskets-brian-crower-bc8230.jpg?v=1614520740"},{"product_id":"brian-crower-87mm-bore-head-gaskets-nissan-sr20det-s14","title":"Brian Crower 87mm Bore Head Gaskets Nissan SR20DET S14","description":"\u003cp\u003eBC gaskets are made in Japan and deliver the ultimate sealing capability even at extreme boost pressures. Individual die cut layers of stainless steel with superior consistency compared to other leading gaskets. These inferior brands are constructed with too high profile of beads which is prone to fatigue, losing the spring effect in a relatively short period of time and consistency of sealing pressure, resulting in leakage. BC gaskets are pre-coated stainless steel with a 0.2 micron consistent layer of Nitrile rubber that completely fills the cylinder head surface. Even a newly resurfaced cylinder head and\/or block has a surface finish or roughness between 10 to15 microns and this Nitrile rubber completely seals the surfaces at operating engine temperatures, unlike the FKM type which is not suitable for filling the surface roughness because the material has too high of heat resistance. Basically the FKM does not melt to fill into the surface roughness providing the proper seal.\u003c\/p\u003e","brand":"Brian Crower","offers":[{"title":"Default Title","offer_id":31125799534694,"sku":"BC8220","price":186.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/brian-crower-87mm-bore-head-gaskets-nissan-sr20det-s14-head-gaskets-brian-crower-bc8220.jpg?v=1614520772"},{"product_id":"je-pro-seal-87-5mm-0-039in-headgasket-1991-2002-nissan-sr20det-rwd-87mm","title":"JE Pro Seal 87.5mm 0.039in Headgasket 1991-2002 Nissan SR20DET RWD 87mm | NI1003-039","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.445\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 87.50\t\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.039\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.00\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172983488614,"sku":"jeNI1003-039","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-875mm-0039in-headgasket-1991-2002-nissan-sr20det-rwd-87mm-ni1003-039-head-gaskets-je-pistons-jeni1003-039.jpg?v=1614530025"},{"product_id":"je-pro-seal-88-5mm-0-033in-headgasket-1991-2002-nissan-sr20det-fwd-87mm","title":"JE Pro Seal 88.5mm 0.033in Headgasket 1991-2002 Nissan SR20DET FWD 87mm | NI1001-033","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.484\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 88.50\t\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.033\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.00\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172984012902,"sku":"jeNI1001-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-885mm-0033in-headgasket-1991-2002-nissan-sr20det-fwd-87mm-ni1001-033-head-gaskets-je-pistons-jeni1001-033.jpg?v=1614530036"},{"product_id":"je-pro-seal-94mm-0-051in-headgasket-1992-2004-subaru-ej20","title":"JE Pro Seal 94mm 0.051in Headgasket 1992-2004 Subaru EJ20 | SB1000-051","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.701\t\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 94.00\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.051\t\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.30\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172984045670,"sku":"jeSB1000-051","price":101.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-94mm-0051in-headgasket-1992-2004-subaru-ej20-sb1000-051-head-gaskets-je-pistons-jesb1000-051.jpg?v=1614530039"},{"product_id":"je-pro-seal-88-5mm-0-039in-headgasket-1991-2002-nissan-sr20det-rwd-vtc-87mm","title":"JE Pro Seal 88.5mm 0.039in Headgasket 1991-2002 Nissan SR20DET RWD VTC 87mm | NI1002-039","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.484\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 88.50\t\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.039\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.00\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172984111206,"sku":"jeNI1002-039","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-885mm-0039in-headgasket-1991-2002-nissan-sr20det-rwd-vtc-87mm-ni1002-039-head-gaskets-je-pistons-jeni1002-039.jpg?v=1614530041"},{"product_id":"je-pro-seal-94mm-0-039in-headgasket-1992-2004-subaru-ej20","title":"JE Pro Seal 94mm 0.039in Headgasket 1992-2004 Subaru EJ20 | SB1000-039","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.701\t\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 94.00\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.039\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.00\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172984143974,"sku":"jeSB1000-039","price":101.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-94mm-0039in-headgasket-1992-2004-subaru-ej20-sb1000-039-head-gaskets-je-pistons-jesb1000-039.jpg?v=1614530044"},{"product_id":"je-pro-seal-100mm-0-039in-headgasket-subaru-ej25-ej257","title":"JE Pro Seal 100mm 0.039in Headgasket WRX\/STI EJ25\/EJ257","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \u003cbr\u003e\u003cbr\u003e Proprietary Coating Technologies: Multiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.937\u003c\/li\u003e\n\u003cli\u003eGasket Bore (mm) 100.00\u003c\/li\u003e\n\u003cli\u003eThickness (inch) 0.039\u003c\/li\u003e\n\u003cli\u003eThickness (mm) 1.00\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172984963174,"sku":"jeSB1001-039","price":101.73,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-100mm-0039in-headgasket-subaru-wrx-sti-ej25ej257-sb1001-039-head-gaskets-je-pistons-jesb1001-039.jpg?v=1614530047"},{"product_id":"je-pro-seal-87-5mm-0-051in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-88-3mm","title":"JE Pro Seal 87.5mm 0.051in Headgasket 1996-2005 Mitsubishi 4G63 EVO 4-8 88.3mm | MI1002-051","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.476\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 87.50\t\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.051\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.30\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172985684070,"sku":"jeMI1002-051","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-875mm-0051in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-883mm-mi1002-051-head-gaskets-je-pistons-jemi1002-051.jpg?v=1614530050"},{"product_id":"je-pro-seal-88-3mm-0-039in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-88-3mm","title":"JE Pro Seal 88.3mm 0.039in Headgasket 1996-2005 Mitsubishi 4G63 EVO 4-8 88.3mm | MI1003-039","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.476\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 88.30\t\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.039\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.00\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172987420774,"sku":"jeMI1003-039","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-883mm-0039in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-883mm-mi1003-039-head-gaskets-je-pistons-jemi1003-039.jpg?v=1614530052"},{"product_id":"je-pro-seal-88-3mm-0-045in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-88-3mm","title":"JE Pro Seal 88.3mm 0.045in Headgasket 1996-2005 Mitsubishi 4G63 EVO 4-8 88.3mm | MI1003-045","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.476\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 88.30\t\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.045\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.15\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172987453542,"sku":"jeMI1003-045","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-883mm-0045in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-883mm-mi1003-045-head-gaskets-je-pistons-jemi1003-045.jpg?v=1614530055"},{"product_id":"je-pro-seal-88-3mm-0-051in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-88-3mm","title":"JE Pro Seal 88.3mm 0.051in Headgasket 1996-2005 Mitsubishi 4G63 EVO 4-8 88.3mm | MI1003-051","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.476\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 88.30\t\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.051\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.30\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172987519078,"sku":"jeMI1003-051","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-883mm-0051in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-883mm-mi1003-051-head-gaskets-je-pistons-jemi1003-051.jpg?v=1614530058"},{"product_id":"je-pro-seal-87-5mm-0-047in-headgasket-1989-2002-nissan-rb26-87-5mm","title":"JE Pro Seal 87.5mm 0.047in Headgasket 1989-2002 Nissan RB26 87.5mm | NI1000-047","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.445\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 87.50\t\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.047\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.20\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172987650150,"sku":"jeNI1000-047","price":393.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-875mm-0047in-headgasket-1989-2002-nissan-rb26-875mm-ni1000-047-head-gaskets-je-pistons-jeni1000-047.jpg?v=1614530061"},{"product_id":"je-pro-seal-87-5mm-0-059in-headgasket-1989-2002-nissan-rb26-87-5mm","title":"JE Pro Seal 87.5mm 0.059in Headgasket 1989-2002 Nissan RB26 87.5mm | NI1000-059","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.445\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 87.50\t\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.039\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.50\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172987682918,"sku":"jeNI1000-059","price":436.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-875mm-0059in-headgasket-1989-2002-nissan-rb26-875mm-ni1000-059-head-gaskets-je-pistons-jeni1000-059.jpg?v=1614530063"},{"product_id":"je-pro-seal-78mm-0-033in-headgasket-1991-2000-honda-d15z1-d16y5-y8","title":"JE Pro Seal 78mm 0.033in Headgasket 1991-2000 Honda D15Z1 \/ D16Y5-Y8 | HN1022-033","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.071\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 78.00\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.033\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 0.85\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172987715686,"sku":"jeHN1022-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-78mm-0033in-headgasket-1991-2000-honda-d15z1-d16y5-y8-hn1022-033-head-gaskets-je-pistons-jehn1022-033.jpg?v=1614530066"},{"product_id":"je-pro-seal-77mm-0-033in-headgasket-1991-2001-honda-d15z1-d16y5-y8","title":"JE Pro Seal 77mm 0.033in Headgasket 1991-2001 Honda D15Z1 \/ D16Y5-Y8 | HN1021-033","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.031\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 77.00\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.033\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 0.85\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172987781222,"sku":"jeHN1021-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-77mm-0033in-headgasket-1991-2001-honda-d15z1-d16y5-y8-hn1021-033-head-gaskets-je-pistons-jehn1021-033.jpg?v=1614530068"},{"product_id":"je-pro-seal-85-3mm-0-045in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8","title":"JE Pro Seal 85.3mm 0.045in Headgasket 1996-2005 Mitsubishi 4G63 EVO 4-8 | MI1000-045","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.358\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 85.3\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.045\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.15\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172987879526,"sku":"jeMI1000-045","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-853mm-0045in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-mi1000-045-head-gaskets-je-pistons-jemi1000-045.jpg?v=1614530071"},{"product_id":"je-pro-seal-85-3mm-0-039in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8","title":"JE Pro Seal 85.3mm 0.039in Headgasket 1996-2005 Mitsubishi 4G63 EVO 4-8 | MI1000-039","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.358\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 85.3\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.039\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.00\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172987912294,"sku":"jeMI1000-039","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-853mm-0039in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-mi1000-039-head-gaskets-je-pistons-jemi1000-039.jpg?v=1614530074"},{"product_id":"je-pro-seal-89mm-0-033in-headgasket-1999-2009-honda-s2000-f20c-f22c-89mm","title":"JE Pro Seal 89mm 0.033in Headgasket 1999-2009 Honda S2000 F20C \/ F22C 89mm | HN1023-033","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.504\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 89\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.033\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 0.85\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172988403814,"sku":"jeHN1023-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-89mm-0033in-headgasket-1999-2009-honda-s2000-f20c-f22c-89mm-hn1023-033-head-gaskets-je-pistons-jehn1023-033.jpg?v=1614530077"},{"product_id":"je-pro-seal-85-3mm-0-051in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8","title":"JE Pro Seal 85.3mm 0.051in Headgasket 1996-2005 Mitsubishi 4G63 EVO 4-8 | MI1000-051","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.358\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 85.3\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.051\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.30\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172988436582,"sku":"jeMI1000-051","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-853mm-0051in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-mi1000-051-head-gaskets-je-pistons-jemi1000-051.jpg?v=1614530080"},{"product_id":"je-pro-seal-86-3mm-0-039in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8","title":"JE Pro Seal 86.3mm 0.039in Headgasket 1996-2005 Mitsubishi 4G63 EVO 4-8 | MI1001-039","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.398\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 86.3\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.039\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.00\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172988469350,"sku":"jeMI1001-039","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-863mm-0039in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-mi1001-039-head-gaskets-je-pistons-jemi1001-039.jpg?v=1614530082"},{"product_id":"je-pro-seal-87-5mm-0-045in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8","title":"JE Pro Seal 87.5mm 0.045in Headgasket 1996-2005 Mitsubishi 4G63 EVO 4-8 | MI1002-045","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.476\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 88.30\t\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.045\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.15\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172988502118,"sku":"jeMI1002-045","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-875mm-0045in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-mi1002-045-head-gaskets-je-pistons-jemi1002-045.jpg?v=1614530085"},{"product_id":"je-pro-seal-87-5mm-0-039in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8","title":"JE Pro Seal 87.5mm 0.039in Headgasket 1996-2005 Mitsubishi 4G63 EVO 4-8 | MI1002-039","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.476\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 87.5\t\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.039\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.00\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172988567654,"sku":"jeMI1002-039","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-875mm-0039in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-mi1002-039-head-gaskets-je-pistons-jemi1002-039.jpg?v=1614530087"},{"product_id":"je-pro-seal-86-3mm-0-051in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8","title":"JE Pro Seal 86.3mm 0.051in Headgasket 1996-2005 Mitsubishi 4G63 EVO 4-8 | MI1001-051","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.398\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 86.3\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.051\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.30\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172988731494,"sku":"jeMI1001-051","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-863mm-0051in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-mi1001-051-head-gaskets-je-pistons-jemi1001-051.jpg?v=1614530090"},{"product_id":"je-pro-seal-86-3mm-0-045in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8","title":"JE Pro Seal 86.3mm 0.045in Headgasket 1996-2005 Mitsubishi 4G63 EVO 4-8 | MI1001-045","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.398\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 86.3\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.045\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.15\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172988797030,"sku":"jeMI1001-045","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-863mm-0045in-headgasket-1996-2005-mitsubishi-4g63-evo-4-8-mi1001-045-head-gaskets-je-pistons-jemi1001-045.jpg?v=1614530092"},{"product_id":"je-pro-seal-84mm-0-033in-headgasket-1990-2001-honda-b18a-non-vtec","title":"JE Pro Seal 84mm 0.033in Headgasket 1990-2001 Honda B18A Non Vtec | HN1013-033","description":"\u003cp\u003eEvery JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is individually cut and formed to optimize performance. \u003cbr\u003e\u003cbr\u003e Proprietary Coating Technologies: Multiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGasket Bore (inch) 3.307\u003c\/li\u003e\n\u003cli\u003eGasket Bore (mm) 84.00\u003c\/li\u003e\n\u003cli\u003eThickness (inch) 0.033\u003c\/li\u003e\n\u003cli\u003eThickness (mm) 0.85\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172988960870,"sku":"jeHN1013-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-84mm-0033in-headgasket-1990-2001-honda-b18a-non-vtec-hn1013-033-head-gaskets-je-pistons-jehn1013-033.jpg?v=1614530095"},{"product_id":"je-pro-seal-83mm-0-033in-headgasket-1990-2001-honda-b18a-w-vtec-head","title":"JE Pro Seal 83mm 0.033in Headgasket 1990-2001 Honda B18A w\/Vtec Head | HN1007-033","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \u003cbr\u003e\u003cbr\u003e Proprietary Coating Technologies: Multiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.268\u003c\/li\u003e\n\u003cli\u003eGasket Bore (mm) 83.00\u003c\/li\u003e\n\u003cli\u003eThickness (inch) 0.033\u003c\/li\u003e\n\u003cli\u003eThickness (mm) 0.85\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172989059174,"sku":"jeHN1007-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-83mm-0033in-headgasket-1990-2001-honda-b18a-wvtec-head-hn1007-033-head-gaskets-je-pistons-jehn1007-033.jpg?v=1614530098"},{"product_id":"je-pro-seal-85mm-0-033in-headgasket-1997-2001-honda-b20b4-b20z2","title":"JE Pro Seal 85mm 0.033in Headgasket 1997-2001 Honda B20B4 \/ B20Z2 | HN1015-033","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.346\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 85.00\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.033\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 0.85\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172989124710,"sku":"jeHN1015-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-85mm-0033in-headgasket-1997-2001-honda-b20b4-b20z2-hn1015-033-head-gaskets-je-pistons-jehn1015-033.jpg?v=1614530101"},{"product_id":"je-pro-seal-76mm-0-033in-headgasket-1991-2001-honda-d15z1-d16y5-y8","title":"JE Pro Seal 76mm 0.033in Headgasket 1991-2001 Honda D15Z1 \/ D16Y5-Y8 | HN1020-033","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 2.992\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 76.00\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.033\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 0.85\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172989190246,"sku":"jeHN1020-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-76mm-0033in-headgasket-1991-2001-honda-d15z1-d16y5-y8-hn1020-033-head-gaskets-je-pistons-jehn1020-033.jpg?v=1614530104"},{"product_id":"je-pro-seal-83mm-0-033in-headgasket-1990-2001-honda-b18a-non-vtec","title":"JE Pro Seal 83mm 0.033in Headgasket 1990-2001 Honda B18A Non Vtec | HN1012-033","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \u003cbr\u003e\u003cbr\u003e Proprietary Coating Technologies: Multiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.268\u003c\/li\u003e\n\u003cli\u003eGasket Bore (mm) 83.00\u003c\/li\u003e\n\u003cli\u003eThickness (inch) 0.033\u003c\/li\u003e\n\u003cli\u003eThickness (mm) 0.85\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172989288550,"sku":"jeHN1012-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-83mm-0033in-headgasket-1990-2001-honda-b18a-non-vtec-hn1012-033-head-gaskets-je-pistons-jehn1012-033.jpg?v=1614530107"},{"product_id":"je-pro-seal-82mm-0-033in-headgasket-1990-2001-honda-b18a-non-vtec","title":"JE Pro Seal 82mm 0.033in Headgasket 1990-2001 Honda B18A Non Vtec | HN1011-033","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \u003cbr\u003e\u003cbr\u003e Proprietary Coating Technologies: Multiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.228\u003c\/li\u003e\n\u003cli\u003eGasket Bore (mm) 82.00\u003c\/li\u003e\n\u003cli\u003eThickness (inch) 0.033\u003c\/li\u003e\n\u003cli\u003eThickness (mm) 0.85\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172989419622,"sku":"jeHN1011-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-82mm-0033in-headgasket-1990-2001-honda-b18a-non-vtec-hn1011-033-head-gaskets-je-pistons-jehn1011-033.jpg?v=1614530111"},{"product_id":"je-pro-seal-85mm-0-033in-headgasket-1990-2001-honda-b18a-non-vtec","title":"JE Pro Seal 85mm 0.033in Headgasket 1990-2001 Honda B18A Non Vtec | HN1014-033","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \u003cbr\u003e\u003cbr\u003e Proprietary Coating Technologies: Multiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.346\u003c\/li\u003e\n\u003cli\u003eGasket Bore (mm) 85.00\u003c\/li\u003e\n\u003cli\u003eThickness (inch) 0.033\u003c\/li\u003e\n\u003cli\u003eThickness (mm) 0.85\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172989517926,"sku":"jeHN1014-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-85mm-0033in-headgasket-1990-2001-honda-b18a-non-vtec-hn1014-033-head-gaskets-je-pistons-jehn1014-033.jpg?v=1614530113"},{"product_id":"je-pro-seal-81mm-0-033in-headgasket-1990-2001-honda-b18a-non-vtec","title":"JE Pro Seal 81mm 0.033in Headgasket 1990-2001 Honda B18A Non Vtec | HN1010-033","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \u003cbr\u003e\u003cbr\u003e Proprietary Coating Technologies: Multiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.189\u003c\/li\u003e\n\u003cli\u003eGasket Bore (mm) 81.00\u003c\/li\u003e\n\u003cli\u003eThickness (inch) 0.033\u003c\/li\u003e\n\u003cli\u003eThickness (mm) 0.85\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172989780070,"sku":"jeHN1010-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-81mm-0033in-headgasket-1990-2001-honda-b18a-non-vtec-hn1010-033-head-gaskets-je-pistons-jehn1010-033.jpg?v=1614530116"},{"product_id":"je-pro-seal-85mm-0-033in-headgasket-1990-2001-honda-b18a-w-vtec-head","title":"JE Pro Seal 85mm 0.033in Headgasket 1990-2001 Honda B18A w\/Vtec Head | HN1009-033","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \u003cbr\u003e\u003cbr\u003e Proprietary Coating Technologies: Multiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.346\u003c\/li\u003e\n\u003cli\u003eGasket Bore (mm) 85.00\u003c\/li\u003e\n\u003cli\u003eThickness (inch) 0.033\u003c\/li\u003e\n\u003cli\u003eThickness (mm) 0.85\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172989878374,"sku":"jeHN1009-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-85mm-0033in-headgasket-1990-2001-honda-b18a-wvtec-head-hn1009-033-head-gaskets-je-pistons-jehn1009-033.jpg?v=1614530119"},{"product_id":"je-pro-seal-84mm-0-033in-headgasket-1990-2001-honda-b18a-w-vtec-head","title":"JE Pro Seal 84mm 0.033in Headgasket 1990-2001 Honda B18A w\/Vtec Head | HN1008-033","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \u003cbr\u003e\u003cbr\u003e Proprietary Coating Technologies: Multiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.307\u003c\/li\u003e\n\u003cli\u003eGasket Bore (mm) 84.00\u003c\/li\u003e\n\u003cli\u003eThickness (inch) 0.033\u003c\/li\u003e\n\u003cli\u003eThickness (mm) 0.85\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172989976678,"sku":"jeHN1008-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-84mm-0033in-headgasket-1990-2001-honda-b18a-wvtec-head-hn1008-033-head-gaskets-je-pistons-jehn1008-033.jpg?v=1614530122"},{"product_id":"je-pro-seal-84mm-0-033in-headgasket-1988-2001-honda-b-series-vtec","title":"JE Pro Seal 84mm 0.033in Headgasket 1988-2001 Honda B Series Vtec | HN1003-033","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.307\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 84.00\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.033\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 0.85\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172990337126,"sku":"jeHN1003-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-84mm-0033in-headgasket-1988-2001-honda-b-series-vtec-hn1003-033-head-gaskets-je-pistons-jehn1003-033.jpg?v=1614530129"},{"product_id":"je-pro-seal-85mm-0-033in-headgasket-1988-2001-honda-b-series-vtec","title":"JE Pro Seal 85mm 0.033in Headgasket 1988-2001 Honda B Series Vtec | HN1004-033","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.346\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 85.00\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.033\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 0.85\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172990435430,"sku":"jeHN1004-033","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-85mm-0033in-headgasket-1988-2001-honda-b-series-vtec-hn1004-033-head-gaskets-je-pistons-jehn1004-033.jpg?v=1614530132"},{"product_id":"je-pro-seal-87mm-0-055in-headgasket-1989-1997-toyota-3sge-sgte","title":"JE Pro Seal 87mm 0.055in Headgasket 1989-1997 Toyota 3SGE \/ SGTE | TY1000-055","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.425\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 87.00\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.055\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.40\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172990632038,"sku":"jeTY1000-055","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-87mm-0055in-headgasket-1989-1997-toyota-3sge-sgte-ty1000-055-head-gaskets-je-pistons-jety1000-055.jpg?v=1614530135"},{"product_id":"je-pro-seal-81mm-0-039in-headgasket-1984-1992-toyota-4age-4agec","title":"JE Pro Seal 81mm 0.039in Headgasket 1984-1992 Toyota 4AGE \/ 4AGEC | TY1001-039","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.189\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 81.00\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.039\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.00\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172990763110,"sku":"jeTY1001-039","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-81mm-0039in-headgasket-1984-1992-toyota-4age-4agec-ty1001-039-head-gaskets-je-pistons-jety1001-039.jpg?v=1614530138"},{"product_id":"je-pro-seal-83mm-0-039in-headgasket-1984-1992-toyota-4age-4agec","title":"JE Pro Seal 83mm 0.039in Headgasket 1984-1992 Toyota 4AGE \/ 4AGEC | TY1002-039","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.268\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 83.00\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.039\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.00\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172991090790,"sku":"jeTY1002-039","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-83mm-0039in-headgasket-1984-1992-toyota-4age-4agec-ty1002-039-head-gaskets-je-pistons-jety1002-039.jpg?v=1614530146"},{"product_id":"je-pro-seal-87mm-0-047in-headgasket-1989-1997-toyota-3sge-sgte","title":"JE Pro Seal 87mm 0.047in Headgasket 1989-1997 Toyota 3SGE \/ SGTE | TY1000-047","description":"\u003cp\u003eEvery JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \u003cbr\u003e\u003cbr\u003e Proprietary Coating Technologies: Multiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGasket Bore (inch) 3.425\u003c\/li\u003e\n\u003cli\u003eGasket Bore (mm) 87.00\u003c\/li\u003e\n\u003cli\u003eThickness (inch) 0.047\u003c\/li\u003e\n\u003cli\u003eThickness (mm) 1.20\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172992008294,"sku":"jeTY1000-047","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-87mm-0047in-headgasket-1989-1997-toyota-3sge-sgte-ty1000-047-head-gaskets-je-pistons-jety1000-047.jpg?v=1614530157"},{"product_id":"je-pro-seal-87mm-0-039in-headgasket-1989-1997-toyota-3sge-sgte","title":"JE Pro Seal 87mm 0.039in Headgasket 1989-1997 Toyota 3SGE \/ SGTE | TY1000-039","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \n\u003cbr\u003e\u003cbr\u003e\nProprietary Coating Technologies: \nMultiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \n\n\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.425\n\u003c\/li\u003e\u003cli\u003eGasket Bore (mm) 87.00\n\u003c\/li\u003e\u003cli\u003eThickness (inch) 0.039\n\u003c\/li\u003e\u003cli\u003eThickness (mm) 1.00\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172992139366,"sku":"jeTY1000-039","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-87mm-0039in-headgasket-1989-1997-toyota-3sge-sgte-ty1000-039-head-gaskets-je-pistons-jety1000-039.jpg?v=1614530158"},{"product_id":"je-pro-seal-102-3mm-0-039in-headgasket-subaru-ej25-ej257","title":"JE Pro Seal 102.3mm 0.039in Headgasket WRX\/STI EJ25\/EJ257 | SB1002-039","description":"\u003cp\u003eEvery JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \u003cbr\u003e\u003cbr\u003e Proprietary Coating Technologies: Multiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure.\u003c\/p\u003e\n\u003cp\u003e��\u003c\/p\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172995088486,"sku":"jeSB1002-039","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-1023mm-0039in-headgasket-subaru-wrx-sti-ej25ej257-sb1002-039-head-gaskets-je-pistons-jesb1002-039.jpg?v=1614530165"},{"product_id":"je-pro-seal-101-3mm-bore-1-0mm-thick-mls-head-gasket-subaru-wrx-sti-2008","title":"JE Pistons [08+ WRX\/STI] Pro Seal 101.3mm Bore 1.0mm Thick MLS Head Gasket","description":"\u003cp align=\"justify\"\u003eEvery JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance.\u003c\/p\u003e\n\u003cp align=\"justify\"\u003eProprietary Coating Technologies: Multiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure.\u003c\/p\u003e\n\u003ctable class=\"echdnm\" cellpadding=\"0\" cellspacing=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSubaru EJ25\/EJ257 101.3mm (3.988) 2008+ MLS 1.0mm (.039) Thick\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172996137062,"sku":"jeSB1003-039","price":190.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-1013mm-bore-10mm-thick-mls-head-gasket-subaru-wrx-sti-2008-sb1003-039-head-gaskets-je-pistons-jesb1003-039.jpg?v=1614530170"},{"product_id":"je-pro-seal-100mm-0-051in-headgasket-subaru-ej25-ej257","title":"JE Pistons [WRX\/STI EJ25\/EJ257] Pro Seal 100mm 0.051in Headgasket","description":"Every JE Pro Seal Head gasket utilizes the best raw materials available such as AISI 304 Stainless Steel. State of the art processes such as in-line laser cutting and multi-stage embossing technologies are utilized to ensure the highest level of quality available. In addition, every layer of our Multi-Layered Steel gaskets is invididually cut and formed to optimize performance. \u003cbr\u003e\u003cbr\u003e Proprietary Coating Technologies: Multiple layers are used to provide the ultimate seal between the head and block mating surfaces. These coatings will normally eliminate the need for additional deck surfacing. Our coating processing provides 100% encapsulation of all exposed metal, far superior to other products that leave exposed raw steel on the edges. The layers include fluoroelastomer (FKM) for extreme temperature and chemical resistance. This technology provides superior conformability, oxidation resistance, and better removal, even after extreme temperature exposure. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\n\u003cli\u003eGasket Bore (inch) 3.937\u003c\/li\u003e\n\u003cli\u003eGasket Bore (mm) 100.00\u003c\/li\u003e\n\u003cli\u003eThickness (inch) 0.051\u003c\/li\u003e\n\u003cli\u003eThickness (mm) 1.30\u003c\/li\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31173000953958,"sku":"jeSB1001-051","price":101.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pro-seal-100mm-0051in-headgasket-subaru-wrx-sti-ej25ej257-sb1001-051-head-gaskets-je-pistons-jesb1001-051.jpg?v=1614530228"},{"product_id":"tomei-head-gasket-87mm-bore-1-2mm-thickness-sr20det","title":"Tomei Head Gasket 87mm Bore 1.2mm Thickness SR20DE| T","description":"\u003cp\u003e\u003cspan\u003eTomei metal head gaskets are made from triple layer super grommet design for superior sealing properties second to none. Choose from a variety of different sizes and compression ratios.\u003c\/span\u003e\u003c\/p\u003e","brand":"Tomei","offers":[{"title":"Default Title","offer_id":31225185730662,"sku":"TOMTA4070-NS08B","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/tomei-head-gasket-87mm-bore-12mm-thickness-sr20det-head-gaskets-tomei-ta4070-ns08b.jpg?v=1614535565"},{"product_id":"tomei-head-gasket-1-2mm-sti-2004-2020-wrx-2006-2014-subaru-2-5l-turbo-models-pair","title":"Tomei Head Gasket 1.2mm STI 2004-2020 \/ WRX 2006-2014 Subaru 2.5L Turbo Models | Pair","description":"\u003cp\u003eThe factory gasket is made from metal but the design is the bead type which is not as effective in sealing as the super grommet design. Most aftermarket metal gaskets are of the grommet design which is better, but the TOMEI Super Grommet design gives you the highest sealing efficiency possible and increased durability. \u003cbr\u003e\u003cbr\u003e With each model change from Subaru engineers the improved engine design from the GC8 to GDB and A models had the increased the rib of the outer bore diameter which improved the gas sealing characteristics. But the results of that change made the water and oil galleries seal decrease. So when the power is increased there is also the increased possibility for oil and water leaks to occur. TOMEI engineers had a second look at the design of the rib height and the Super Grommet Design and they have achieved an overall improvement in overall seal. \u003cbr\u003e\u003cbr\u003e They have made multiple thicknesses available to achieve your desired compression ratio for your application. Now you can build an engine with higher accuracy to suit your needs.\u003c\/p\u003e","brand":"Tomei","offers":[{"title":"Default Title","offer_id":31225186680934,"sku":"TOMTA4070-SB02C","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/tomei-head-gasket-12mm-sti-2004-2020-wrx-2006-2014-subaru-25l-turbo-models-pair-head-gaskets-tomei-ta4070-sb02c.jpg?v=1614535585"},{"product_id":"tomei-head-gaskets-93-5-bore-1-2mm-thick-subaru-wrx-ej20-single-avcs","title":"Tomei Head Gaskets 93.5 Bore 1.2mm Thick WRX EJ20 SINGLE AVCS | Pair","description":"\u003cp align=\"justify\"\u003eIntroducing Tomei Metal Head Gaskets. Since cylinder capacity can be adjusted by changing the thickness of the head gasket, a thicker head gasket can be used to increase your engine's compression ratio. Alternatively, you can choose a thinner head gasket and maintain your stock compression ratio. The stainless material used for the TOMEI Metal Head Gasket was chosen for its high heat capacity, because stainless material dissipates heat at such a high rate, you greatly reduce the risk of head gasket failure.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBore Size of 93.5\u003c\/li\u003e\n\u003cli\u003eCross Section Thickness of 1.2mm\u003c\/li\u003e\n\u003cli\u003eConstructed from Stainless Material\u003c\/li\u003e\n\u003cli\u003eIncreases Engine Compression Ratio\u003c\/li\u003e\n\u003cli\u003eDurable and Heat Resistant\u003c\/li\u003e\n\u003cli\u003eReduced Risk of Failure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTomei has a Compression Ratio Calculator, as well as a reference for Stock Engine Data (including compression ratios). \u003c\/p\u003e","brand":"Tomei","offers":[{"title":"Default Title","offer_id":31225187598438,"sku":"TOMTA4070-SB01C","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/tomei-head-gaskets-935-bore-12mm-thick-subaru-wrx-ej20-single-avcs-pair-head-gaskets-tomei-ta4070-sb01c.jpg?v=1614535596"},{"product_id":"tomei-head-gaskets-93-5-bore-1-0mm-thick-subaru-wrx-ej20-single-avcs","title":"Tomei Head Gaskets 93.5 Bore 1.0mm Thick WRX EJ20 SINGLE AVCS | Pair","description":"\u003cp align=\"justify\"\u003eIntroducing Tomei Metal Head Gaskets. Since cylinder capacity can be adjusted by changing the thickness of the head gasket, a thicker head gasket can be used to increase your engine's compression ratio. Alternatively, you can choose a thinner head gasket and maintain your stock compression ratio. The stainless material used for the TOMEI Metal Head Gasket was chosen for its high heat capacity, because stainless material dissipates heat at such a high rate, you greatly reduce the risk of head gasket failure.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBore Size of 93.5\u003c\/li\u003e\n\u003cli\u003eCross Section Thickness of 1.0mm\u003c\/li\u003e\n\u003cli\u003eConstructed from Stainless Material\u003c\/li\u003e\n\u003cli\u003eIncreases Engine Compression Ratio\u003c\/li\u003e\n\u003cli\u003eDurable and Heat Resistant\u003c\/li\u003e\n\u003cli\u003eReduced Risk of Failure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTomei has a Compression Ratio Calculator, as well as a reference for Stock Engine Data (including compression ratios). \u003c\/p\u003e","brand":"Tomei","offers":[{"title":"Default Title","offer_id":31225187663974,"sku":"TOMTA4070-SB01B","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/tomei-head-gaskets-935-bore-10mm-thick-subaru-wrx-ej20-single-avcs-pair-head-gaskets-tomei-ta4070-sb01b.jpg?v=1614535597"},{"product_id":"tomei-head-gaskets-93-5-bore-0-7mm-thick-subaru-wrx-ej20-single-avcs","title":"Tomei Head Gaskets 93.5 Bore 0.7mm Thick WRX EJ20 SINGLE AVCS | Pair","description":"\u003cp align=\"justify\"\u003eIntroducing Tomei Metal Head Gaskets. Since cylinder capacity can be adjusted by changing the thickness of the head gasket, a thicker head gasket can be used to increase your engine's compression ratio. Alternatively, you can choose a thinner head gasket and maintain your stock compression ratio. The stainless material used for the TOMEI Metal Head Gasket was chosen for its high heat capacity, because stainless material dissipates heat at such a high rate, you greatly reduce the risk of head gasket failure.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBore Size of 93.5\u003c\/li\u003e\n\u003cli\u003eCross Section Thickness of 0.7mm\u003c\/li\u003e\n\u003cli\u003eConstructed from Stainless Material\u003c\/li\u003e\n\u003cli\u003eIncreases Engine Compression Ratio\u003c\/li\u003e\n\u003cli\u003eDurable and Heat Resistant\u003c\/li\u003e\n\u003cli\u003eReduced Risk of Failure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTomei has a Compression Ratio Calculator, as well as a reference for Stock Engine Data (including compression ratios). \u003c\/p\u003e","brand":"Tomei","offers":[{"title":"Default Title","offer_id":31225188614246,"sku":"TOMTA4070-SB01A","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/tomei-head-gaskets-935-bore-07mm-thick-subaru-wrx-ej20-single-avcs-pair-head-gaskets-tomei-ta4070-sb01a.jpg?v=1614535600"}],"url":"https:\/\/jdmuscleusa.com\/collections\/head-gaskets.oembed?page=2","provider":"JDMuscle","version":"1.0","type":"link"}