{"title":"2015-2019 Subaru Legacy Engine","description":"\u003cp\u003eShop engine parts and upgrades for the 2015-2019 Subaru Legacy. You'll find intakes, exhaust, cooling, fuel, and supporting engine components listed for 2015-2019 Legacy fitment, from daily-driver improvements to more focused build parts. JDMuscle carries established performance brands so you can shop this generation with confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShop related\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2015-2019-subaru-legacy\"\u003e15-19 Legacy\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2015-2019-subaru-legacy-brakes\"\u003e15-19 Legacy Brakes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2015-2019-subaru-legacy-exterior\"\u003e15-19 Legacy Exterior\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2015-2019-subaru-legacy-interior\"\u003e15-19 Legacy Interior\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2015-2019-subaru-legacy-suspension\"\u003e15-19 Legacy Suspension\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2015-2019-subaru-legacy-drivetrain\"\u003e15-19 Legacy Drivetrain\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"k-n-replacement-air-filter-subaru-wrx-2008-2021-sti-2008-2018-forester-2008-2019-legacy-2003-2019-outback-2003-2019-crosstrek-2013-2017-impreza-2007-2016-33-2304","title":"K\u0026N Engineering High-Flow Replacement Panel Air Filter","description":"\u003cp\u003eThe K\u0026amp;N Engineering High-Flow Replacement Panel Air Filter is a washable, reusable drop-in replacement filter for Subaru WRX, WRX STI, Forester, Legacy, Outback, Crosstrek and Impreza models. K\u0026amp;N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K\u0026amp;N's 10-Year\/Million Mile Limited Warranty. K\u0026amp;N drop-in replacement filters are designed to install easily into your factory air box.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 33-2304\u003c\/li\u003e\n\u003cli\u003eVehicle fitment: Subaru WRX 2008-2021, WRX STI 2008-2018, Forester 2008-2019, Legacy 2003-2019, Outback 2003-2019, Crosstrek 2013-2017, Impreza 2007-2016\u003c\/li\u003e\n\u003cli\u003eDesigned to increase horsepower\u003c\/li\u003e\n\u003cli\u003eWashable, reusable, and engineered to last for the life of your vehicle\u003c\/li\u003e\n\u003cli\u003eDesigned to provide high airflow and exceptional filtration\u003c\/li\u003e\n\u003cli\u003eEngineered to fit easily into your factory air box\u003c\/li\u003e\n\u003cli\u003e10-Year\/Million Mile Limited Warranty\u003c\/li\u003e\n\u003cli\u003eOnly needs cleaning every 50,000 miles under normal highway driving conditions\u003c\/li\u003e\n\u003cli\u003eEmissions legal in all 50 States\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my Subaru?\u003c\/strong\u003e\u003cbr\u003eThis panel filter fits Subaru WRX (2008-2021), WRX STI (2008-2018), Forester (2008-2019), Legacy (2003-2019), Outback (2003-2019), Crosstrek (2013-2017) and Impreza (2007-2016) models — verify fitment by part number 33-2304 before purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eThe box contains one K\u0026amp;N High-Flow replacement panel air filter, designed to install into your factory air box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: How often does the filter need cleaning?\u003c\/strong\u003e\u003cbr\u003eThe filter only needs cleaning every 50,000 miles under normal highway driving conditions, and it is washable and reusable.\u003c\/p\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":31173021892710,"sku":"knn33-2304","price":55.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/33-2304.jpg?v=1667294865"},{"product_id":"company23-crankshaft-socket-subaru-wrx-2015-2020-brz-2013-2018-fr-s-2013-2016","title":"Company23 FA\/FB Crankshaft Socket","description":"\u003cp\u003eThe Company23 FA\/FB Crankshaft Socket slips on over the crank snout and allows an engine builder to rotate a complete FA\/FB engine with any 1\/2\" ratchet or breaker bar, for easy location of TDC when replacing the timing belt or doing other engine work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: COP-527\u003c\/li\u003e\n\u003cli\u003eCrankshaft rotating socket slips on over the crank snout\u003c\/li\u003e\n\u003cli\u003eEnables an engine builder to rotate a complete engine with any 1\/2\" ratchet or breaker bar\u003c\/li\u003e\n\u003cli\u003eWorks with and without the oil pump installed\u003c\/li\u003e\n\u003cli\u003eLow profile height makes access easy\u003c\/li\u003e\n\u003cli\u003eEliminates risk of crankshaft snout damage or backwards engine rotation\u003c\/li\u003e\n\u003cli\u003eCNC machined steel designed for a lifetime of use\u003c\/li\u003e\n\u003cli\u003eProduct not designed for use with an impact wrench\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWorks with:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e15+ Subaru WRX\u003c\/li\u003e\n\u003cli\u003e12+ Subaru Impreza (FA\/FB Engines Only)\u003c\/li\u003e\n\u003cli\u003e12+ Subaru XV Crosstrek (FA\/FB Engines Only)\u003c\/li\u003e\n\u003cli\u003e11+ Subaru Forester (FA\/FB Engines Only)\u003c\/li\u003e\n\u003cli\u003e12+ Subaru Legacy (FA\/FB Engines Only)\u003c\/li\u003e\n\u003cli\u003e13+ Subaru BRZ\u003c\/li\u003e\n\u003cli\u003e13+ Scion FR-S\u003c\/li\u003e\n\u003cli\u003e12+ Toyota GT86\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my 2018 WRX?\u003c\/strong\u003e\u003cbr\u003eA: Yes. This socket works with 15+ Subaru WRX, and with FA\/FB engine applications including 12+ Impreza, 12+ XV Crosstrek, 11+ Forester, and 12+ Legacy, plus 13+ BRZ, 13+ Scion FR-S, and 12+ Toyota GT86.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: One Company23 FA\/FB Crankshaft Socket is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Can I use an impact wrench with this socket?\u003c\/strong\u003e\u003cbr\u003eA: No. This product is not designed for use with an impact wrench, and an impact wrench must never be used with the crank socket to rotate the engine.\u003c\/p\u003e","brand":"Company23","offers":[{"title":"Default Title","offer_id":31504271638630,"sku":"COP-527","price":63.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/company23-crankshaft-socket-subaru-wrx-2015-2020-brz-2013-2018-fr-s-2013-2016-crankshafts-company23-cop-527.jpg?v=1614538786"},{"product_id":"perrin-19-21-subaru-wrx-16-18-forester-lightweight-crank-pulley-fa-fb-engines-w-large-hub-blue","title":"Perrin [19-21 WRX, 16-18 Forester XT, 15-16 Impreza, 15-19 Outback, 15-19 Legacy] Lightweight Crank Pulley - Blue","description":"\u003cp\u003eThe PERRIN Lightweight Crank Pulley lightens up your rotating engine parts to free up power. True weight savings can be felt with every blip of the gas pedal.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2019-2021 Subaru WRX, 2016-2018 Subaru Forester XT (FA20 DIT), 2015-2016 Subaru Impreza (FA\/FB), 2015-2019 Subaru Outback, and 2015-2019 Subaru Legacy per modinjapan.com + prospeedracing.com.au + blackopsautoworks.com — for FA\/FB engines with the large crank hub\u003c\/li\u003e\n\u003cli\u003eWeighs just 2 lbs — 1 lb lighter than the stock OEM crank pulley; the reduction in rotational mass is equal to removing more than 100 lbs of vehicle weight\u003c\/li\u003e\n\u003cli\u003eThrottle response, horsepower, and torque are all increased with this easy-to-install part\u003c\/li\u003e\n\u003cli\u003ePrecision-machined hub included for perfect fitment; front oil seal surface finished to OEM levels\u003c\/li\u003e\n\u003cli\u003eMachined from 6061T6 billet aluminum with a 4130 steel hub; blue anodized finish\u003c\/li\u003e\n\u003cli\u003ePERRIN part number PSP-ENG-104BL\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Perrin Performance","offers":[{"title":"Default Title","offer_id":39522226012262,"sku":"perPSP-ENG-104BL","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/perrin-lightweight-crank-pulley-blue-for-wrx-2019-21-forester-fafb-engines-wlarge-hub-2016-2018-psp-eng-104bl-4667630.jpg?v=1793347596"},{"product_id":"perrin-oil-fill-cap-subaru-wrx-2002-2022-sti-2004-2021-forester-1998-2023-outback-1996-2023-impreza-1993-2022-legacy-1990-2023-ascent-2019-2022-crosstrek-2013-2022-brz-2013-2023-toyota-gr86-2022-2023-scion-fr-s-2013-2016-psp-eng-711-parent","title":"Perrin [02-25 WRX, 04-21 WRX STI, 13-25 BRZ\/FRS\/86] Oil Fill Cap","description":"\u003cp\u003eReplace the ugly yellow plastic OEM oil fill cap with the sexy billet oil fill cap from PERRIN — the finishing touch to your engine bay.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits: most Subaru models — WRX 2002-2025, WRX STI 2004-2021, BRZ 2013-2026, Forester, Impreza, Legacy, Outback, Crosstrek, Ascent, plus Scion FR-S, Toyota 86 and GR86\u003c\/li\u003e\n\u003cli\u003eMachined from 6061-T6 billet aluminum with a textured, hard-anodized finish for corrosion protection\u003c\/li\u003e\n\u003cli\u003eKnurled grip section for easy removal and installation; PERRIN logo indexed so it always sits in the right spot\u003c\/li\u003e\n\u003cli\u003eAvailable in Red, Black, Neon Yellow, Blue and Hyper Pink anodized finishes\u003c\/li\u003e\n\u003cli\u003eIn the box: (1) oil fill cap, (1) O-ring, warranty \u0026amp; instructions\u003c\/li\u003e\n\u003cli\u003ePERRIN part numbers: PSP-ENG-711RD (Red), PSP-ENG-711BK (Black), PSP-ENG-711NY (Neon Yellow), PSP-ENG-711BL (Blue), PSP-ENG-711HP (Hyper Pink)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Perrin Performance","offers":[{"title":"Red","offer_id":39606074540134,"sku":"perPSP-ENG-711RD","price":65.6,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":39606074507366,"sku":"perPSP-ENG-711BK","price":65.6,"currency_code":"USD","in_stock":true},{"title":"Neon Yellow","offer_id":39606074474598,"sku":"perPSP-ENG-711NY","price":70.4,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":39606074441830,"sku":"perPSP-ENG-711BL","price":65.6,"currency_code":"USD","in_stock":true},{"title":"Pink","offer_id":42993406574694,"sku":"perPSP-ENG-711HP","price":70.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/perrin-02-25-wrx-04-21-sti-13-25-brzfrs86-oil-fill-cap-psp-eng-711-3496812.png?v=1770332363"},{"product_id":"csf-15-19-subaru-legacy-and-outback-2-5l-high-performance-all-aluminum-radiator","title":"CSF [15-19 Legacy\/Outback] High-Performance All-Aluminum Radiator","description":"\u003cp\u003e\u003cstrong\u003eCSF High-Performance All-Aluminum Radiator\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCSF High-Performance All-Aluminum Radiator for the 2015-2019 Subaru Legacy and the other vehicles listed below.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 7213\u003c\/li\u003e\n\u003cli\u003eProduct: CSF High-Performance All-Aluminum Radiator\u003c\/li\u003e\n\u003cli\u003eEngines listed: 2.5L H4\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-Row - 42mm Ultra-High-Performance Core\u003c\/li\u003e\n\u003cli\u003eCooling Tubes with CSF's Exclusive B-Tube Technology\u003c\/li\u003e\n\u003cli\u003e6.5mm Tall Ultra Efficient Fins with a Multi-Louvered Design for Maximum Surface Area Contact\u003c\/li\u003e\n\u003cli\u003eCNC Machined Mounting Brackets and OEM Style Inlet\/Outlet\u003c\/li\u003e\n\u003cli\u003e100% All Aluminum TIG-Welded Construction\u003c\/li\u003e\n\u003cli\u003eSmooth Satin Finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2015-2019 Subaru Legacy\u003c\/li\u003e\n\u003cli\u003e2015-2019 Subaru Outback\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ: What vehicles does CSF 7213 fit?\u003c\/strong\u003e\u003cbr\u003eA: It fits the 2015-2019 Subaru Legacy; 2015-2019 Subaru Outback.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is CSF 7213 a direct-fit part?\u003c\/strong\u003e\u003cbr\u003eA: Yes. It is built for the vehicles listed above and is designed to install without modification on those vehicles.\u003c\/p\u003e","brand":"CSF","offers":[{"title":"Default Title","offer_id":40214158999654,"sku":"csf7213","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/csf-15-19-subaru-legacy-and-outback-25l-high-performance-all-aluminum-radiator-9008612.jpg?v=1794864015"},{"product_id":"overtake-battery-tie-down-subaru-models","title":"Overtake Battery Tie Down - Subaru Models - Excluding Outback 15-19, Legacy 15-19","description":"\u003cp\u003eThis Overtake battery tie down is CNC machined from billet 6061 aluminum and holds the stock battery in place while giving the Subaru engine bay a satin anodized finish. It reuses the existing hardware for a hassle-free installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: A10267BLU (Blue), A10267BLK (Black), A10267RED (Red)\u003c\/li\u003e\n\u003cli\u003eBillet 6061 aluminum construction for strength and light weight\u003c\/li\u003e\n\u003cli\u003eCNC machined for a precise fit with the stock battery\u003c\/li\u003e\n\u003cli\u003eReuses stock hardware for easy installation\u003c\/li\u003e\n\u003cli\u003eSatin anodized finish, available in Blue, Black or Red\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OVERTAKE","offers":[{"title":"OVERTAKE Blue","offer_id":44305036509286,"sku":"A10267BLU","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":44305036476518,"sku":"A10267BLK","price":60.0,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":44305036542054,"sku":"A10267RED","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/overtake-battery-tie-down-subaru-models-4250497.jpg?v=1770312918"},{"product_id":"perrin-performance-subaru-fa-fb-engines-crank-pulley-hub-with-large-outer-diameter","title":"Perrin [19-21 WRX, 15-19 Legacy, 15-19 Outback, 16-18 Forester, 15-16 Impreza] FA\/FB Engines Crank Pulley Hub - Large Outer Diameter","description":"\u003cp\u003eThe PERRIN Crank Pulley Hub is the large outside-diameter replacement hub for Subaru FA and FB engines, providing the correct interface for compatible large-hub crank pulley applications.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2019-2021 Subaru WRX, 2015-2019 Subaru Legacy, 2015-2019 Subaru Outback, 2016-2018 Subaru Forester, and 2015-2016 Subaru Impreza applications listed for the compatible large-hub configuration.\u003c\/li\u003e\n\u003cli\u003eLarge outside diameter hub is intended for crankshafts that use the large-hub configuration.\u003c\/li\u003e\n\u003cli\u003ePrecision-machined replacement component for compatible PERRIN large-hub crank pulley applications.\u003c\/li\u003e\n\u003cli\u003eVerify crank hub size and vehicle application before ordering, since FA\/FB engines may use different hub configurations.\u003c\/li\u003e\n\u003cli\u003eReferences: \u003ca href=\"https:\/\/perrin.com\/products\/lightweight-crank-pulley-for-outback\"\u003ePERRIN product page\u003c\/a\u003e and \u003ca href=\"https:\/\/xatracing.com\/perrin-subaru-fa-fb-engines-crank-pulley-hub-only-w-large-od-psp-eng-105\"\u003eXAT Racing product reference\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Perrin Performance","offers":[{"title":"Default Title","offer_id":44313576833126,"sku":"perPSP-ENG-105","price":61.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/perrin-performance-subaru-fafb-engines-crank-pulley-hub-with-large-outer-diameter-7134895.jpg?v=1770312402"},{"product_id":"perrin-performance-exhaust-hanger-kit-for-subaru-wrx-sti-impreza-brz-and-gr86-5-pieces","title":"Perrin Performance [08-26 WRX, 08-21 WRX STI, 13-26 BRZ, 22-26 GR86, 08-25 Impreza, 13-16 FR-S, 13-20 86\/Crosstrek, 08-18 Forester, 07-25 Legacy, 07-26 Outback] Standard Exhaust Hanger Kit - 5 Pieces","description":"\u003cp\u003eThe PERRIN Performance Standard Length Exhaust Hanger Kit replaces soft OEM rubber mounts with firmer 75A polyurethane hangers that keep the exhaust aligned, reduce movement and rattles, and help prevent contact with the bumper or chassis. This five-piece standard-length kit covers a broad range of Subaru and Toyota applications from 2007 through 2026.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFive standard-length polyurethane exhaust hangers for a complete mounting refresh.\u003c\/li\u003e\n\u003cli\u003e75A construction withstands heat, vibration, and daily driving.\u003c\/li\u003e\n\u003cli\u003eHelps prevent exhaust sagging, movement, rattles, and bumper contact.\u003c\/li\u003e\n\u003cli\u003eDirect replacement design installs in the factory exhaust hanger locations.\u003c\/li\u003e\n\u003cli\u003eFitment: 2008-2026 Subaru WRX; 2008-2021 Subaru WRX STI; 2013-2026 Subaru BRZ; 2013-2016 Scion FR-S; 2013-2020 Toyota 86; 2022-2026 Toyota GR86; 2008-2025 Subaru Impreza; 2013-2020 Subaru Crosstrek; 2008-2018 Subaru Forester; 2007-2025 Subaru Legacy; 2007-2026 Subaru Outback.\u003c\/li\u003e\n\u003cli\u003eReferences: \u003ca href=\"https:\/\/perrin.com\/products\/exhaust-hangers-for-2008-26-wrx-sti-brz-fr-s-gr86-forester-xt-outback-legacy?variant=52031740936492\"\u003ePERRIN product page\u003c\/a\u003e; \u003ca href=\"https:\/\/perrin.com\/pages\/instructions-database\"\u003eInstructions Database\u003c\/a\u003e; \u003ca href=\"https:\/\/perrin.com\/pages\/warranty\"\u003eWarranty\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Perrin Performance","offers":[{"title":"Default Title","offer_id":44517557600358,"sku":"perPSP-EXT-701","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/perrin-08-26-wrxstiimpreza-13-26-brzgr86-standard-length-exhaust-hanger-kit-5-pcs-7104191.jpg?v=1780986609"},{"product_id":"perrin-performance-long-exhaust-hanger-kit-for-subaru-wrx-sti-impreza-brz-and-gr86-5-pieces","title":"Perrin [08-26 WRX, 08-21 WRX STI, 13-26 BRZ, 22-26 GR86, 13-16 FR-S, 17-20 86, 08-25 Impreza, 13-20 Crosstrek, 08-18 Forester, 07-26 Outback, 07-25 Legacy] Long Exhaust Hanger Kit - 5 Pieces","description":"\u003cp\u003eThe PERRIN Long Exhaust Hanger Kit replaces soft factory rubber mounts with stiffer polyurethane hangers that keep the exhaust aligned, reduce movement, and provide extra clearance from the bumper and chassis.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFitment: 2008-2026 Subaru WRX; 2008-2021 Subaru WRX STI; 2013-2026 Subaru BRZ; 2022-2026 Toyota GR86; 2013-2016 Scion FR-S; 2017-2020 Toyota 86; 2008-2025 Subaru Impreza; 2013-2020 Subaru Crosstrek; 2008-2018 Subaru Forester; 2007-2026 Subaru Outback; 2007-2025 Subaru Legacy.\u003c\/li\u003e\n\u003cli\u003eLong-length design provides additional clearance and exhaust positioning flexibility.\u003c\/li\u003e\n\u003cli\u003eFive polyurethane hangers rated at 75A durometer help control exhaust movement.\u003c\/li\u003e\n\u003cli\u003eDesigned to withstand high-performance exhaust temperatures and reduce rattles or bumper contact.\u003c\/li\u003e\n\u003cli\u003eEstimated installation time: 30 minutes.\u003c\/li\u003e\n\u003cli\u003eRed finish; long-size configuration, manufacturer part PSP-EXT-711.\u003c\/li\u003e\n\u003cli\u003eReferences: \u003ca href=\"https:\/\/perrin.com\/products\/exhaust-hangers-for-2008-26-wrx-sti-brz-fr-s-gr86-forester-xt-outback-legacy\"\u003ePERRIN Exhaust Hanger product page\u003c\/a\u003e, \u003ca href=\"https:\/\/perrin.com\/pages\/instructions-database\"\u003ePERRIN instructions database\u003c\/a\u003e, and \u003ca href=\"https:\/\/perrin.com\/pages\/warranty\"\u003ePERRIN warranty information\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Perrin Performance","offers":[{"title":"Default Title","offer_id":44517557993574,"sku":"1016186","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/PSP-EXT-711_01.jpg?v=1789321345"},{"product_id":"overtake-exhaust-manifold-to-head-gasket-set-subaru-ez30-ez36-engines","title":"OVERTAKE [04-09 Outback, 08-19 Legacy, 06-14 Tribeca] Exhaust Manifold to Head Gasket Set - Subaru EZ30 \/ EZ36 Engines","description":"\u003cp\u003eThe \u003cstrong\u003eOVERTAKE Exhaust Manifold to Head Gasket\u003c\/strong\u003e seals the exhaust manifold to the cylinder head on the \u003cstrong\u003eH6 Subaru\u003c\/strong\u003e using \u003cstrong\u003emulti-layer steel construction with a stainless steel fire ring\u003c\/strong\u003e. If you run an \u003cstrong\u003eEZ30 or EZ36\u003c\/strong\u003e, you have probably found out that Subaru no longer sells this gasket, and the budget aftermarket versions that filled the gap do not hold up.\u003c\/p\u003e\n\u003cp\u003eThe original OEM gasket sat in a hot, high-pressure spot and did its job, but Subaru discontinued it (\u003cstrong\u003e44011AG040\u003c\/strong\u003e). What is left on the shelf is mostly thin, stamped material that is not fully stainless, which is where the dreaded waffle-gasket blowout comes from. The \u003cstrong\u003eOVERTAKE Exhaust Manifold to Head Gasket\u003c\/strong\u003e is built for the Subaru H6 the way this joint should be sealed, covering the 2004-2009 Outback through the later Legacy and Tribeca. Multi-layer steel, a stainless fire ring, real thickness, and it comes as a pair so both heads get done at once.\u003c\/p\u003e\n\u003ch2\u003eWHAT WE SOLVED:\u003c\/h2\u003e\n\u003cp\u003eWith the OEM part gone and the cheap stuff failing, this is the gasket that actually seals and stays sealed:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect OEM replacement, no longer available new\u003c\/li\u003e\n\u003cli\u003eFull stainless multi-layer build\u003c\/li\u003e\n\u003cli\u003eNo more waffle-gasket blowouts\u003c\/li\u003e\n\u003cli\u003eSurvives real heat cycling and pressure\u003c\/li\u003e\n\u003cli\u003eSold as a pair for both heads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFEATURES:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMulti-layer steel construction with a stainless steel fire ring at the combustion seal\u003c\/li\u003e\n\u003cli\u003e22% thicker than the original OEM gasket for a more durable, longer-lasting seal\u003c\/li\u003e\n\u003cli\u003eFully stainless build where many aftermarket gaskets use thinner, non-stainless\u003c\/li\u003e\n\u003cli\u003ematerial and fail early\u003c\/li\u003e\n\u003cli\u003eEngineered specifically for the Subaru H6 exhaust system for a reliable, leak-free fit\u003c\/li\u003e\n\u003cli\u003eSold as a pair to seal both cylinder heads\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the discontinued OEM Subaru gasket 44011AG040\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTHE DETAILS:\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe exhaust manifold gasket on the H6 Subaru sits in one of the hottest, highest-pressure spots on the engine. Subaru no longer supplies the original, and the aftermarket options that stepped in are mostly thin stamped gaskets that are not fully stainless, which is exactly where the waffle-gasket blowout comes from. The OVERTAKE gasket is built the way this joint should be sealed, with multiple layers of steel and a stainless fire ring around the port, running 22% thicker so it holds clamping load and takes the pressure a tuned car makes. It drops in as a direct replacement for the discontinued OEM part 44011AG040 with no modification, and it comes as a pair so both heads get done in one job. It also carries over to H6 swap builds, where a gasket that can take abuse matters even more.\u003c\/p\u003e\n\u003ch2\u003eWhat's In The Box:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 OVERTAKE Exhaust Manifold to Head Gaskets\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAPPLICATIONS:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2004-2009 Subaru Outback\u003c\/li\u003e\n\u003cli\u003e2008-2019 Subaru Legacy\u003c\/li\u003e\n\u003cli\u003e2006-2014 Subaru Tribeca\u003c\/li\u003e\n\u003cli\u003eAlso fits H6 swap applications\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OVERTAKE","offers":[{"title":"Default Title","offer_id":45973847965798,"sku":"A10839","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/overtake-exhaust-manifold-to-head-gasket-set-subaru-ez30-ez36-engines-5306699.jpg?v=1786472171"},{"product_id":"afe-power-02-21-impreza-wrx-sti-legacy-twisted-steel-long-tube-headers-304-stainless-steel","title":"aFe Power [02-21 WRX\/STI, Legacy] Twisted Steel Long Tube Headers - 304 Stainless Steel","description":"\u003cp\u003eaFe POWER Twisted Steel Long Tube Headers are engineered to maximize exhaust flow for increased horsepower, torque, and improved throttle response in your 2002-2021 Subaru WRX \/ WRX STI and turbo Legacy models. Constructed from mandrel-bent 304 stainless steel tubing, these headers provide exceptional strength, durability, and corrosion resistance for long-lasting performance. The optimized unequal-length tube design enhances exhaust scavenging while creating the iconic boxer rumble. Formed collectors reduce turbulence and improve exhaust velocity, while factory-style laser-cut flanges provide a secure, leak-free seal. Featuring 100% TIG-welded construction, the Twisted Steel Headers are designed for a direct-fit installation using factory exhaust locations with no cutting or modifications required — proudly engineered and manufactured in the USA.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwisted Steel long tube headers for 2002-2021 Subaru WRX \/ WRX STI and turbo Legacy\u003c\/li\u003e\n\u003cli\u003eMandrel-bent 304 stainless steel tubing\u003c\/li\u003e\n\u003cli\u003eOptimized unequal-length design enhances scavenging and the iconic boxer rumble\u003c\/li\u003e\n\u003cli\u003eFormed collectors reduce turbulence and improve exhaust velocity\u003c\/li\u003e\n\u003cli\u003eFactory-style laser-cut flanges for a secure, leak-free seal\u003c\/li\u003e\n\u003cli\u003e100% TIG-welded construction\u003c\/li\u003e\n\u003cli\u003eDirect-fit installation using factory exhaust locations — no cutting or modifications\u003c\/li\u003e\n\u003cli\u003eEngineered and manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":47258178191462,"sku":"afe48-36803","price":845.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/4dc61721ccdeb0a41007787773d32485L_874f768f-042a-43f9-9aa7-40dc79f540d9.jpg?v=1790175483"},{"product_id":"afe-15-19-subaru-outback-h6-3-6l-silver-bullet-throttle-body-spacer-kit","title":"aFe [15-19 Legacy\/Outback 3.6R] Silver Bullet Throttle Body Spacer Kit","description":"\u003cp\u003eThis aFe Silver Bullet Throttle Body Spacer Kit is a throttle body spacer for the 2015-2019 Subaru Legacy 3.6R and Subaru Outback 3.6R with the H6 3.6L engine. The Serrated\/Helix combination design creates intake turbulence in the combustion chamber, which breaks up the fuel for a more complete combustion cycle, increasing horsepower and torque and improving throttle response.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eaFe part number 46-30006\u003c\/li\u003e\n\u003cli\u003eSerrated\/Helix combination design creates intake turbulence and reduces the intake whistle that occurs with Helix-only designs\u003c\/li\u003e\n\u003cli\u003eCNC-machined from 6061-T6 billet aluminum, precision machined for light weight, high strength and perfect fit and finish\u003c\/li\u003e\n\u003cli\u003eUses all factory mounting locations, providing stability and a hassle-free installation\u003c\/li\u003e\n\u003cli\u003eNot CARB approved; CARB acknowledgement required (per the listing's stored attributes)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eFitment:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2015-2019 Subaru Legacy 3.6R Limited with H6 3.6L engine\u003c\/li\u003e\n\u003cli\u003e2015-2019 Subaru Outback 3.6R Limited and 2017-2019 Subaru Outback 3.6R Touring with H6 3.6L engine\u003c\/li\u003e\n\u003cli\u003eConfirm your vehicle's year, model, trim and engine before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eQ\u0026amp;A:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQ: Does this fit my 2015-2019 Subaru Outback 3.6R? A: Yes. This aFe Silver Bullet Throttle Body Spacer Kit, part 46-30006, is listed for the 2015-2019 Subaru Outback 3.6R Limited and 2017-2019 Outback 3.6R Touring with the H6 3.6L engine, and for the 2015-2019 Subaru Legacy 3.6R Limited.\u003c\/li\u003e\n\u003cli\u003eQ: What is included? A: One aFe Silver Bullet Throttle Body Spacer Kit, part 46-30006, is included per SKU.\u003c\/li\u003e\n\u003cli\u003eQ: How does this spacer install? A: This Silver Bullet throttle body spacer uses all factory mounting locations, providing stability and a hassle-free installation, per aFe.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"aFe","offers":[{"title":"Default Title","offer_id":67946620289126,"sku":"747511","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/70d564b4abb0b019de1aeaa0e27767f8L.jpg?v=1794019472"},{"product_id":"cometic-subaru-fb25b-041-mlx-cylinder-head-gasket-95-5mm-bore-lhs","title":"Cometic Gasket [Subaru FB25B] MLX Cylinder Head Gasket 95.5mm Bore .041in - LHS","description":"\u003cp\u003eThe Cometic Gasket MLX Cylinder Head Gasket is built for the Subaru FB25B engine in a 95.5mm bore and .041in thickness, for the left-hand side of the engine. MLX gaskets utilize an integrated stopper layer for combustion chamber sealing and provide improved clamp load around the cylinder without increasing bore distortion.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMLX gasket with an integrated stopper layer for combustion chamber sealing\u003c\/li\u003e\n\u003cli\u003eSubaru FB25B engine application\u003c\/li\u003e\n\u003cli\u003eBore: 95.5mm\u003c\/li\u003e\n\u003cli\u003eThickness: .041in\u003c\/li\u003e\n\u003cli\u003ePosition: Left-Hand Side (LHS)\u003c\/li\u003e\n\u003cli\u003eImproved clamp load around the cylinder without increasing bore distortion\u003c\/li\u003e\n\u003cli\u003eCometic Gasket part number: C14156-041\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eQ\u0026amp;A\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eDoes this head gasket fit my Subaru FB25B engine?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. This Cometic MLX Cylinder Head Gasket is made for the Subaru FB25B with a 95.5mm bore, in the left-hand side position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe box contains one Cometic MLX Cylinder Head Gasket, part number C14156-041, for the left-hand side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does MLX mean on this gasket?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCometic MLX gaskets utilize an integrated stopper layer for combustion chamber sealing.\u003c\/p\u003e","brand":"Cometic Gasket","offers":[{"title":"Default Title","offer_id":67969983053926,"sku":"714320","price":101.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/6a58dd233117177d90acdaeb177de4a6L_b2ec2f2f-70b1-44f8-be0b-36ec8947ceb3.jpg?v=1794179157"},{"product_id":"cometic-subaru-fb25b-041in-mlx-cylinder-head-gasket-95-5mm-bore-rhs","title":"Cometic Gasket [Subaru FB25B] MLX Cylinder Head Gasket 95.5mm Bore .041in - RHS","description":"\u003cp\u003eThe Cometic Gasket MLX Cylinder Head Gasket is built for the Subaru FB25B engine in a 95.5mm bore and .041in thickness, for the right-hand side of the engine. MLX gaskets utilize an integrated stopper layer for combustion chamber sealing and provide improved clamp load around the cylinder without increasing bore distortion.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMLX gasket with an integrated stopper layer for combustion chamber sealing\u003c\/li\u003e\n\u003cli\u003eSubaru FB25B engine application\u003c\/li\u003e\n\u003cli\u003eBore: 95.5mm\u003c\/li\u003e\n\u003cli\u003eThickness: .041in\u003c\/li\u003e\n\u003cli\u003ePosition: Right-Hand Side (RHS)\u003c\/li\u003e\n\u003cli\u003eImproved clamp load around the cylinder without increasing bore distortion\u003c\/li\u003e\n\u003cli\u003eCometic Gasket part number: C14155-041\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eQ\u0026amp;A\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eDoes this head gasket fit my Subaru FB25B engine?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eYes. This Cometic MLX Cylinder Head Gasket is made for the Subaru FB25B with a 95.5mm bore, in the right-hand side position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe box contains one Cometic MLX Cylinder Head Gasket, part number C14155-041, for the right-hand side.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does MLX mean on this gasket?\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCometic MLX gaskets utilize an integrated stopper layer for combustion chamber sealing.\u003c\/p\u003e","brand":"Cometic Gasket","offers":[{"title":"Default Title","offer_id":67969985970278,"sku":"714321","price":101.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/7be28a50ebafad70231035585bf9fbafL_a9d5e7a8-7168-406d-8bb3-66055b4c358b.jpg?v=1794179179"},{"product_id":"moog-15-19-subaru-legacy-front-right-outer-right-outer-tie-rod","title":"MOOG [15-19 Subaru Legacy] Front Right Outer \/ Right Outer Tie Rod","description":"\u003cp\u003eQuickSteer? chassis parts are designed and tested to restore steering and handling to their original performance.\nQuickSteer ES801217 Steering Tie Rod End for Subaru Outback\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBROAD COVERAGE -- Available for both foreign and domestic applications\u003c\/li\u003e\n  \u003cli\u003eConstruction and design validated by MOOG engineers\u003c\/li\u003e\n  \u003cli\u003eEngineered to provide long life and dependability\u003c\/li\u003e\n  \u003cli\u003eReplacement helps restore vehicle handling\u003c\/li\u003e\n  \u003cli\u003eDesigned for OE fit and function\u003c\/li\u003e\n  \u003cli\u003eCoated for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eIncludes any necessary hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Moog","offers":[{"title":"Default Title","offer_id":67970228977766,"sku":"646735","price":38.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/b87690876f18dede3901e20fa2611e2eL.jpg?v=1794180632"},{"product_id":"moog-15-19-subaru-legacy-front-left-outer-left-outer-tie-rod","title":"MOOG [15-19 Subaru Legacy] Front Left Outer \/ Left Outer Tie Rod","description":"\u003cp\u003eQuickSteer? chassis parts are designed and tested to restore steering and handling to their original performance.\nQuickSteer ES801218 Steering Tie Rod End for Subaru Outback\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBROAD COVERAGE -- Available for both foreign and domestic applications\u003c\/li\u003e\n  \u003cli\u003eConstruction and design validated by MOOG engineers\u003c\/li\u003e\n  \u003cli\u003eEngineered to provide long life and dependability\u003c\/li\u003e\n  \u003cli\u003eReplacement helps restore vehicle handling\u003c\/li\u003e\n  \u003cli\u003eDesigned for OE fit and function\u003c\/li\u003e\n  \u003cli\u003eCoated for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eIncludes any necessary hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Moog","offers":[{"title":"Default Title","offer_id":67970233106534,"sku":"646736","price":38.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/a16a06d6c49f40ba2ee6aa178c715117L.jpg?v=1794180661"},{"product_id":"gates-2015-subaru-outback-4-cyl-2-5l-accessory-belt-drive-kit-standard","title":"Gates 2015 Subaru Outback 4-Cyl. 2.5L Accessory Belt Drive Kit (Standard)","description":"\u003cp\u003eThe Gates Accessory Belt Drive Kit (part number 90K-39359A) is a complete serpentine belt drive kit for the 2015-2019 Subaru Outback with the 4-cylinder 2.5L engine. Complete Serpentine Kits make it easy to restore the entire accessory belt drive system. Neglecting to replace the tensioner and pulley(s) at the same time you replace the belt can ultimately shorten the life of the belt as well as other front-end accessory components. Each kit contains an OE-equivalent belt, tensioner, idler pulley and necessary hardware with installation instructions and tech tips for easy, accurate installation.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIncludes serpentine belt with premium EPDM construction, tensioner, applicable idler pulleys and applicable tensioner hardware\u003c\/li\u003e\n  \u003cli\u003eNOTE: Kit contents vary depending on specific needs of vehicle kit application\u003c\/li\u003e\n  \u003cli\u003eDesigned for convenience, easy parts sourcing and reduced customer comebacks\u003c\/li\u003e\n  \u003cli\u003eMeets or exceeds OE standards in form, function and fit\u003c\/li\u003e\n  \u003cli\u003ePart Number: 90K-39359A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Does this kit fit my 2015-2019 Subaru Outback 2.5L?\u003c\/strong\u003e\u003cbr\u003eA: Yes. This Gates Accessory Belt Drive Kit (part number 90K-39359A) is listed for the 2015-2019 Subaru Outback with the 4-cylinder 2.5L engine, and also fits the 2015-2019 Subaru Legacy 2.5i.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: Each kit contains an OE-equivalent serpentine belt with premium EPDM construction, tensioner, applicable idler pulleys and applicable tensioner hardware, with installation instructions and tech tips. Kit contents vary depending on the specific needs of the vehicle application.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQ: Why replace the whole belt drive system at once?\u003c\/strong\u003e\u003cbr\u003eA: Replacing the belt, tensioner and pulleys together restores the entire accessory belt drive system; neglecting the tensioner and pulleys when replacing the belt can shorten the life of the belt and other front-end accessory components.\u003c\/p\u003e\n","brand":"Gates","offers":[{"title":"Default Title","offer_id":67971426254950,"sku":"883292","price":134.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/4a65910d11df71a409d6ec8b9dcf9a3cL_eec5cc75-8342-4053-a0aa-4684ade665fa.jpg?v=1794185514"},{"product_id":"gates-10-18-subaru-outback-6-cyl-3-6l-intake-engine-variable-valve-timing-solenoid","title":"Gates [10-18 Legacy\/Outback] 3.6L Intake Engine Variable Valve Timing Solenoid","description":"\u003cp\u003eThe Gates engine variable valve timing solenoid (Intake) is an OE performance variable valve timing solenoid, also referred to as an oil control valve, for 2010-2018 Subaru Legacy and Outback 3.6L. It is designed to OE specifications in fit, form and performance, constructed from high quality materials for durability and maximum service life, and tested to effectively restore engine performance for better fuel economy, enhanced power, improved idle and reduced emissions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eContinuously controls oil flow for precise timing and maximum engine performance\u003c\/li\u003e\n\u003cli\u003eDirect replacement ensures exact fit and easy installation\u003c\/li\u003e\n\u003cli\u003eSuperior construction with exceptional components\u003c\/li\u003e\n\u003cli\u003ePart number: VVS201\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my 2010-2018 Subaru Legacy and Outback 3.6L?\u003c\/strong\u003e\u003cbr\u003eThis solenoid fits 2010-2018 Subaru Legacy and Outback 3.6L applications listed for this part. Confirm the engine and position match your vehicle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e\u003cbr\u003eOne engine variable valve timing solenoid is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a direct replacement?\u003c\/strong\u003e\u003cbr\u003eYes. It is a direct replacement designed to ensure exact fit and easy installation.\u003c\/p\u003e","brand":"Gates","offers":[{"title":"Default Title","offer_id":67971438313574,"sku":"885765","price":73.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/412fcaf9-4e60-42da-a39b-5cd9705bc161-800_f55bf3ee-1dbe-4d02-9ff2-d2a35d52eff3.jpg?v=1794185560"},{"product_id":"gates-10-18-subaru-outback-6-cyl-3-6l-exhaust-right-engine-variable-valve-timing-solenoid","title":"Gates [10-18 Legacy\/Outback] 3.6L Exhaust (Right) Engine Variable Valve Timing Solenoid","description":"\u003cp\u003eThe Gates engine variable valve timing solenoid (Exhaust (Right)) is an OE performance variable valve timing solenoid, also referred to as an oil control valve, for 2010-2018 Subaru Legacy and Outback 3.6L. It is designed to OE specifications in fit, form and performance, constructed from high quality materials for durability and maximum service life, and tested to effectively restore engine performance for better fuel economy, enhanced power, improved idle and reduced emissions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eContinuously controls oil flow for precise timing and maximum engine performance\u003c\/li\u003e\n\u003cli\u003eDirect replacement ensures exact fit and easy installation\u003c\/li\u003e\n\u003cli\u003eSuperior construction with exceptional components\u003c\/li\u003e\n\u003cli\u003ePart number: VVS249\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my 2010-2018 Subaru Legacy and Outback 3.6L?\u003c\/strong\u003e\u003cbr\u003eThis solenoid fits 2010-2018 Subaru Legacy and Outback 3.6L applications listed for this part. Confirm the engine and position match your vehicle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e\u003cbr\u003eOne engine variable valve timing solenoid is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a direct replacement?\u003c\/strong\u003e\u003cbr\u003eYes. It is a direct replacement designed to ensure exact fit and easy installation.\u003c\/p\u003e","brand":"Gates","offers":[{"title":"Default Title","offer_id":67971450241126,"sku":"885804","price":71.0,"currency_code":"USD","in_stock":false}]},{"product_id":"gates-10-18-subaru-outback-6-cyl-3-6l-exhaust-left-engine-variable-valve-timing-solenoid","title":"Gates [10-18 Legacy\/Outback] 3.6L Exhaust (Left) Engine Variable Valve Timing Solenoid","description":"\u003cp\u003eThe Gates engine variable valve timing solenoid (Exhaust (Left)) is an OE performance variable valve timing solenoid, also referred to as an oil control valve, for 2010-2018 Subaru Legacy and Outback 3.6L. It is designed to OE specifications in fit, form and performance, constructed from high quality materials for durability and maximum service life, and tested to effectively restore engine performance for better fuel economy, enhanced power, improved idle and reduced emissions.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eContinuously controls oil flow for precise timing and maximum engine performance\u003c\/li\u003e\n\u003cli\u003eDirect replacement ensures exact fit and easy installation\u003c\/li\u003e\n\u003cli\u003eSuperior construction with exceptional components\u003c\/li\u003e\n\u003cli\u003ePart number: VVS250\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my 2010-2018 Subaru Legacy and Outback 3.6L?\u003c\/strong\u003e\u003cbr\u003eThis solenoid fits 2010-2018 Subaru Legacy and Outback 3.6L applications listed for this part. Confirm the engine and position match your vehicle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e\u003cbr\u003eOne engine variable valve timing solenoid is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this a direct replacement?\u003c\/strong\u003e\u003cbr\u003eYes. It is a direct replacement designed to ensure exact fit and easy installation.\u003c\/p\u003e","brand":"Gates","offers":[{"title":"Default Title","offer_id":67971459514470,"sku":"885805","price":71.0,"currency_code":"USD","in_stock":false}]},{"product_id":"fel-pro-subaru-outback-bs-40733-engine-crankshaft-seal-kit","title":"Fel-Pro Subaru Outback BS 40733 Engine Crankshaft Seal Kit","description":"\u003cp\u003eFel-Pro(R) gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment. FEL-PRO BS 40733 Engine Crankshaft Seal Kit for Subaru Outback\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEngineered and manufactured specifically for repair applications\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds all original equipment specifications\u003c\/li\u003e\n\u003cli\u003eApplication specific design to ensure a perfect fit\u003c\/li\u003e\n\u003cli\u003eValidated for fit, form, and function\u003c\/li\u003e\n\u003cli\u003eUnsurpassed quality you can trust\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart Number: felBS40733\u003c\/p\u003e\u003cp\u003eFitment: Subaru Legacy 3.0 R 2009; Subaru Legacy 3.0 R Limited 2008; Subaru Legacy 3.0 R Limited 2009; Subaru Legacy 3.6R 2010; Subaru Legacy 3.6R 2011; Subaru Legacy 3.6R 2012; Subaru Legacy 3.6R 2013; Subaru Legacy 3.6R Limited 2010; Subaru Legacy 3.6R Limited 2011; Subaru Legacy 3.6R Limited 2012; Subaru Legacy 3.6R Limited 2013; Subaru Legacy 3.6R Limited 2014; Subaru Legacy 3.6R Limited 2015; Subaru Legacy 3.6R Limited 2016; Subaru Legacy 3.6R Limited 2017; Subaru Legacy 3.6R Limited 2018; Subaru Legacy 3.6R Limited 2019; Subaru Legacy 3.6R Premium 2010; Subaru Legacy 3.6R Premium 2011; Subaru Legacy 3.6R Premium 2012; Subaru Outback 3.0 R Limited 2009; Subaru Outback 3.6R 2010; Subaru Outback 3.6R 2011; Subaru Outback 3.6R 2012; Subaru Outback 3.6R 2013; Subaru Outback 3.6R Limited 2010; Subaru Outback 3.6R Limited 2011; Subaru Outback 3.6R Limited 2012; Subaru Outback 3.6R Limited 2013; Subaru Outback 3.6R Limited 2014; Subaru Outback 3.6R Limited 2015; Subaru Outback 3.6R Limited 2016; Subaru Outback 3.6R Limited 2017; Subaru Outback 3.6R Limited 2018; Subaru Outback 3.6R Limited 2019; Subaru Outback 3.6R Premium 2010; Subaru Outback 3.6R Premium 2011; Subaru Outback 3.6R Premium 2012; Subaru Outback 3.6R Touring 2017; Subaru Outback 3.6R Touring 2018; Subaru Outback 3.6R Touring 2019; Subaru Outback R L.L. Bean Edition 2008; Subaru Tribeca Base 2008; Subaru Tribeca Base 2009; Subaru Tribeca Limited 2008; Subaru Tribeca Limited 2009; Subaru Tribeca Limited 2010; Subaru Tribeca Limited 2011; Subaru Tribeca Limited 2012; Subaru Tribeca Limited 2013; Subaru Tribeca Limited 2014; Subaru Tribeca Premium 2010; Subaru Tribeca Premium 2011; Subaru Tribeca Premium 2012; Subaru Tribeca Touring 2010; Subaru Tribeca Touring 2011; Subaru Tribeca Touring 2012\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: This part is listed for: Subaru Legacy 3.0 R 2009; Subaru Legacy 3.0 R Limited 2008; Subaru Legacy 3.0 R Limited 2009; Subaru Legacy 3.6R 2010; Subaru Legacy 3.6R 2011; Subaru Legacy 3.6R 2012; Subaru Legacy 3.6R 2013; Subaru Legacy 3.6R Limited 2010; Subaru Legacy 3.6R Limited 2011; Subaru Legacy 3.6R Limited 2012; Subaru Legacy 3.6R Limited 2013; Subaru Legacy 3.6R Limited 2014; Subaru Legacy 3.6R Limited 2015; Subaru Legacy 3.6R Limited 2016; Subaru Legacy 3.6R Limited 2017; Subaru Legacy 3.6R Limited 2018; Subaru Legacy 3.6R Limited 2019; Subaru Legacy 3.6R Premium 2010; Subaru Legacy 3.6R Premium 2011; Subaru Legacy 3.6R Premium 2012; Subaru Outback 3.0 R Limited 2009; Subaru Outback 3.6R 2010; Subaru Outback 3.6R 2011; Subaru Outback 3.6R 2012; Subaru Outback 3.6R 2013; Subaru Outback 3.6R Limited 2010; Subaru Outback 3.6R Limited 2011; Subaru Outback 3.6R Limited 2012; Subaru Outback 3.6R Limited 2013; Subaru Outback 3.6R Limited 2014; Subaru Outback 3.6R Limited 2015; Subaru Outback 3.6R Limited 2016; Subaru Outback 3.6R Limited 2017; Subaru Outback 3.6R Limited 2018; Subaru Outback 3.6R Limited 2019; Subaru Outback 3.6R Premium 2010; Subaru Outback 3.6R Premium 2011; Subaru Outback 3.6R Premium 2012; Subaru Outback 3.6R Touring 2017; Subaru Outback 3.6R Touring 2018; Subaru Outback 3.6R Touring 2019; Subaru Outback R L.L. Bean Edition 2008; Subaru Tribeca Base 2008; Subaru Tribeca Base 2009; Subaru Tribeca Limited 2008; Subaru Tribeca Limited 2009; Subaru Tribeca Limited 2010; Subaru Tribeca Limited 2011; Subaru Tribeca Limited 2012; Subaru Tribeca Limited 2013; Subaru Tribeca Limited 2014; Subaru Tribeca Premium 2010; Subaru Tribeca Premium 2011; Subaru Tribeca Premium 2012; Subaru Tribeca Touring 2010; Subaru Tribeca Touring 2011; Subaru Tribeca Touring 2012. Please verify your year, model and trim against this fitment list before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included?\u003c\/strong\u003e\u003cbr\u003eA: This listing is for the Fel-Pro Subaru Outback BS 40733 Engine Crankshaft Seal Kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is the part number for this listing?\u003c\/strong\u003e\u003cbr\u003eA: The part number for this listing is felBS40733.\u003c\/p\u003e","brand":"Fel-Pro","offers":[{"title":"Default Title","offer_id":67971573481574,"sku":"868820","price":28.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/7a052a1bdd72a2b8b6d06186b8de8f7eL.jpg?v=1794186008"},{"product_id":"fel-pro-subaru-outback-hs-26712-pt-permatorque-engine-cylinder-head-gasket-set","title":"Fel-Pro Subaru Outback HS 26712 PT PermaTorque Engine Cylinder Head Gasket Set","description":"\u003cp\u003eFel-Pro(R) gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment. FEL-PRO HS 26712 PT PermaTorque Engine Cylinder Head Gasket Set for Subaru Outback\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSEALING TECHNOLOGIES -- Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair\u003c\/li\u003e\n\u003cli\u003eDESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces\u003c\/li\u003e\n\u003cli\u003eSTRONG AND DURABLE -- Features graphite or reinforced fiber facing material and steel armor for strength and durability\u003c\/li\u003e\n\u003cli\u003ePROPRIETARY COATING -- Nonstick anti-friction coating seals small surface scratches and imperfections\u003c\/li\u003e\n\u003cli\u003eNO RETORQUE DESIGN -- Steel core helps eliminate the need for retorquing head bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart Number: felHS26712PT\u003c\/p\u003e\u003cp\u003eFitment: Subaru Legacy 3.6R 2010; Subaru Legacy 3.6R 2011; Subaru Legacy 3.6R 2012; Subaru Legacy 3.6R 2013; Subaru Legacy 3.6R Limited 2010; Subaru Legacy 3.6R Limited 2011; Subaru Legacy 3.6R Limited 2012; Subaru Legacy 3.6R Limited 2013; Subaru Legacy 3.6R Limited 2014; Subaru Legacy 3.6R Limited 2015; Subaru Legacy 3.6R Limited 2016; Subaru Legacy 3.6R Limited 2017; Subaru Legacy 3.6R Limited 2018; Subaru Legacy 3.6R Limited 2019; Subaru Legacy 3.6R Premium 2010; Subaru Legacy 3.6R Premium 2011; Subaru Legacy 3.6R Premium 2012; Subaru Outback 3.6R 2010; Subaru Outback 3.6R 2011; Subaru Outback 3.6R 2012; Subaru Outback 3.6R 2013; Subaru Outback 3.6R Limited 2010; Subaru Outback 3.6R Limited 2011; Subaru Outback 3.6R Limited 2012; Subaru Outback 3.6R Limited 2013; Subaru Outback 3.6R Limited 2014; Subaru Outback 3.6R Limited 2015; Subaru Outback 3.6R Limited 2016; Subaru Outback 3.6R Limited 2017; Subaru Outback 3.6R Limited 2018; Subaru Outback 3.6R Limited 2019; Subaru Outback 3.6R Premium 2010; Subaru Outback 3.6R Premium 2011; Subaru Outback 3.6R Premium 2012; Subaru Outback 3.6R Touring 2017; Subaru Outback 3.6R Touring 2018; Subaru Outback 3.6R Touring 2019; Subaru Tribeca Base 2008; Subaru Tribeca Base 2009; Subaru Tribeca Limited 2008; Subaru Tribeca Limited 2009; Subaru Tribeca Limited 2010; Subaru Tribeca Limited 2011; Subaru Tribeca Limited 2012; Subaru Tribeca Limited 2013; Subaru Tribeca Limited 2014; Subaru Tribeca Premium 2010; Subaru Tribeca Premium 2011; Subaru Tribeca Premium 2012; Subaru Tribeca Touring 2010; Subaru Tribeca Touring 2011; Subaru Tribeca Touring 2012\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: This part is listed for: Subaru Legacy 3.6R 2010; Subaru Legacy 3.6R 2011; Subaru Legacy 3.6R 2012; Subaru Legacy 3.6R 2013; Subaru Legacy 3.6R Limited 2010; Subaru Legacy 3.6R Limited 2011; Subaru Legacy 3.6R Limited 2012; Subaru Legacy 3.6R Limited 2013; Subaru Legacy 3.6R Limited 2014; Subaru Legacy 3.6R Limited 2015; Subaru Legacy 3.6R Limited 2016; Subaru Legacy 3.6R Limited 2017; Subaru Legacy 3.6R Limited 2018; Subaru Legacy 3.6R Limited 2019; Subaru Legacy 3.6R Premium 2010; Subaru Legacy 3.6R Premium 2011; Subaru Legacy 3.6R Premium 2012; Subaru Outback 3.6R 2010; Subaru Outback 3.6R 2011; Subaru Outback 3.6R 2012; Subaru Outback 3.6R 2013; Subaru Outback 3.6R Limited 2010; Subaru Outback 3.6R Limited 2011; Subaru Outback 3.6R Limited 2012; Subaru Outback 3.6R Limited 2013; Subaru Outback 3.6R Limited 2014; Subaru Outback 3.6R Limited 2015; Subaru Outback 3.6R Limited 2016; Subaru Outback 3.6R Limited 2017; Subaru Outback 3.6R Limited 2018; Subaru Outback 3.6R Limited 2019; Subaru Outback 3.6R Premium 2010; Subaru Outback 3.6R Premium 2011; Subaru Outback 3.6R Premium 2012; Subaru Outback 3.6R Touring 2017; Subaru Outback 3.6R Touring 2018; Subaru Outback 3.6R Touring 2019; Subaru Tribeca Base 2008; Subaru Tribeca Base 2009; Subaru Tribeca Limited 2008; Subaru Tribeca Limited 2009; Subaru Tribeca Limited 2010; Subaru Tribeca Limited 2011; Subaru Tribeca Limited 2012; Subaru Tribeca Limited 2013; Subaru Tribeca Limited 2014; Subaru Tribeca Premium 2010; Subaru Tribeca Premium 2011; Subaru Tribeca Premium 2012; Subaru Tribeca Touring 2010; Subaru Tribeca Touring 2011; Subaru Tribeca Touring 2012. Please verify your year, model and trim against this fitment list before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included?\u003c\/strong\u003e\u003cbr\u003eA: This listing is for the Fel-Pro Subaru Outback HS 26712 PT PermaTorque Engine Cylinder Head Gasket Set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is the part number for this listing?\u003c\/strong\u003e\u003cbr\u003eA: The part number for this listing is felHS26712PT.\u003c\/p\u003e","brand":"Fel-Pro","offers":[{"title":"Default Title","offer_id":67971609395302,"sku":"863972","price":365.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/1d3f4944ec45e36e129b77f39710870cL.jpg?v=1794186153"},{"product_id":"fel-pro-subaru-outback-26712-pt-permatorque-engine-cylinder-head-gasket","title":"Fel-Pro Subaru Outback 26712 PT PermaTorque Engine Cylinder Head Gasket","description":"\u003cp\u003eFel-Pro(R) gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment. FEL-PRO 26712 PT PermaTorque Engine Cylinder Head Gasket for Subaru Outback\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces\u003c\/li\u003e\n\u003cli\u003eMULTI-LAYERED STEEL CONSTRUCTION -- Multiple layers of stainless steel maintain sealing stress and accommodate head lift\u003c\/li\u003e\n\u003cli\u003eUNIQUE COMBUSTION SEAL -- Accommodates high cylinder pressures and head movement encountered with engines\u003c\/li\u003e\n\u003cli\u003ePROPRIETARY COATING -- Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra\u003c\/li\u003e\n\u003cli\u003eSUPERIOR SEAL -- Precise embossed sealing beads at all vital areas to eliminate leak paths\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart Number: fel26712PT\u003c\/p\u003e\u003cp\u003eFitment: Subaru Legacy 3.6R 2010; Subaru Legacy 3.6R 2011; Subaru Legacy 3.6R 2012; Subaru Legacy 3.6R 2013; Subaru Legacy 3.6R Limited 2010; Subaru Legacy 3.6R Limited 2011; Subaru Legacy 3.6R Limited 2012; Subaru Legacy 3.6R Limited 2013; Subaru Legacy 3.6R Limited 2014; Subaru Legacy 3.6R Limited 2015; Subaru Legacy 3.6R Limited 2016; Subaru Legacy 3.6R Limited 2017; Subaru Legacy 3.6R Limited 2018; Subaru Legacy 3.6R Limited 2019; Subaru Legacy 3.6R Premium 2010; Subaru Legacy 3.6R Premium 2011; Subaru Legacy 3.6R Premium 2012; Subaru Outback 3.6R 2010; Subaru Outback 3.6R 2011; Subaru Outback 3.6R 2012; Subaru Outback 3.6R 2013; Subaru Outback 3.6R Limited 2010; Subaru Outback 3.6R Limited 2011; Subaru Outback 3.6R Limited 2012; Subaru Outback 3.6R Limited 2013; Subaru Outback 3.6R Limited 2014; Subaru Outback 3.6R Limited 2015; Subaru Outback 3.6R Limited 2016; Subaru Outback 3.6R Limited 2017; Subaru Outback 3.6R Limited 2018; Subaru Outback 3.6R Limited 2019; Subaru Outback 3.6R Premium 2010; Subaru Outback 3.6R Premium 2011; Subaru Outback 3.6R Premium 2012; Subaru Outback 3.6R Touring 2017; Subaru Outback 3.6R Touring 2018; Subaru Outback 3.6R Touring 2019; Subaru Tribeca Base 2008; Subaru Tribeca Base 2009; Subaru Tribeca Limited 2008; Subaru Tribeca Limited 2009; Subaru Tribeca Limited 2010; Subaru Tribeca Limited 2011; Subaru Tribeca Limited 2012; Subaru Tribeca Limited 2013; Subaru Tribeca Limited 2014; Subaru Tribeca Premium 2010; Subaru Tribeca Premium 2011; Subaru Tribeca Premium 2012; Subaru Tribeca Touring 2010; Subaru Tribeca Touring 2011; Subaru Tribeca Touring 2012\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: This part is listed for: Subaru Legacy 3.6R 2010; Subaru Legacy 3.6R 2011; Subaru Legacy 3.6R 2012; Subaru Legacy 3.6R 2013; Subaru Legacy 3.6R Limited 2010; Subaru Legacy 3.6R Limited 2011; Subaru Legacy 3.6R Limited 2012; Subaru Legacy 3.6R Limited 2013; Subaru Legacy 3.6R Limited 2014; Subaru Legacy 3.6R Limited 2015; Subaru Legacy 3.6R Limited 2016; Subaru Legacy 3.6R Limited 2017; Subaru Legacy 3.6R Limited 2018; Subaru Legacy 3.6R Limited 2019; Subaru Legacy 3.6R Premium 2010; Subaru Legacy 3.6R Premium 2011; Subaru Legacy 3.6R Premium 2012; Subaru Outback 3.6R 2010; Subaru Outback 3.6R 2011; Subaru Outback 3.6R 2012; Subaru Outback 3.6R 2013; Subaru Outback 3.6R Limited 2010; Subaru Outback 3.6R Limited 2011; Subaru Outback 3.6R Limited 2012; Subaru Outback 3.6R Limited 2013; Subaru Outback 3.6R Limited 2014; Subaru Outback 3.6R Limited 2015; Subaru Outback 3.6R Limited 2016; Subaru Outback 3.6R Limited 2017; Subaru Outback 3.6R Limited 2018; Subaru Outback 3.6R Limited 2019; Subaru Outback 3.6R Premium 2010; Subaru Outback 3.6R Premium 2011; Subaru Outback 3.6R Premium 2012; Subaru Outback 3.6R Touring 2017; Subaru Outback 3.6R Touring 2018; Subaru Outback 3.6R Touring 2019; Subaru Tribeca Base 2008; Subaru Tribeca Base 2009; Subaru Tribeca Limited 2008; Subaru Tribeca Limited 2009; Subaru Tribeca Limited 2010; Subaru Tribeca Limited 2011; Subaru Tribeca Limited 2012; Subaru Tribeca Limited 2013; Subaru Tribeca Limited 2014; Subaru Tribeca Premium 2010; Subaru Tribeca Premium 2011; Subaru Tribeca Premium 2012; Subaru Tribeca Touring 2010; Subaru Tribeca Touring 2011; Subaru Tribeca Touring 2012. Please verify your year, model and trim against this fitment list before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included?\u003c\/strong\u003e\u003cbr\u003eA: This listing is for the Fel-Pro Subaru Outback 26712 PT PermaTorque Engine Cylinder Head Gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is the part number for this listing?\u003c\/strong\u003e\u003cbr\u003eA: The part number for this listing is fel26712PT.\u003c\/p\u003e","brand":"Fel-Pro","offers":[{"title":"Default Title","offer_id":67971628826726,"sku":"865310","price":81.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/d256d0de9139d5e67a809a663d732306L_4c7b86f3-1825-444d-a2a5-0d5bd0b5665a.jpg?v=1794186239"},{"product_id":"nameless-performance-15-19-legacy-intake","title":"Nameless Performance [15-19 Legacy] Intake","description":"\u003cp\u003eThe factory intake tube connects the airbox and mass airflow sensor to the throttle body, and in many vehicles that is achieved with a thermoplastic rotomolded tube that, over time, has a potential to develop cracks in its flexible bellows. A crack in that part results in rough engine idle with compromised drivability and an instant check engine light, not to mention an intake system that is directly ingesting underhood dirt and grime. Nobody wants that. And thermoplastics are always in a state of entropy, especially so in high temperature environments like an engine bay. The upgrade is here: our system replaces that entire thermoplastic intake and flow disrupting silencer assembly with a mandrel bent stainless tube and five layer reinforced high temp silicone couplers. The factory breather tube connection is retained and the breather fitting is made of billet stainless steel and TIG welded in place. The result is a replacement part that has improved function and form.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe factory intake tube connects the airbox and mass airflow sensor to the throttle body, and in many vehicles that is achieved with a thermoplastic rotomolded tube that, over time, has a potential to develop cracks in its flexible bellows. A crack in that part results in rough engine idle with compromised drivability and an instant check engine light, not to mention an intake system that is directly ingesting underhood dirt and grime. Nobody wants that. And thermoplastics are always in a state of entropy, especially so in high temperature environments like an engine bay\u003c\/li\u003e\n\u003cli\u003eour system replaces that entire thermoplastic intake and flow disrupting silencer assembly with a mandrel bent stainless tube and five layer reinforced high temp silicone couplers. The factory breather tube connection is retained and the breather fitting is made of billet stainless steel and TIG welded in place. The result is a replacement part that has improved function and form\u003c\/li\u003e\n\u003cli\u003eOur classic wrinkle red and wrinkle black powdercoating options are back for this new product line. The powdercoat provides enough texture to give a good match for most other red powdercoated parts on the market as well as having the ability to be easily wiped down and kept clean. Looking for a custom color? Just ask for an unfinished brushed stainless option in the notes of your order and you can customize the part in the finish of your choice\u003c\/li\u003e\n\u003cli\u003eDon't let the time honored tradition of a cracked factory intake tube leave you stranded - upgrade before that happens and save yourself a tow, or an even bigger headache in the backcountry\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest intake for 15-19 Legacy?\u003c\/strong\u003e The factory intake tube connects the airbox and mass airflow sensor to the throttle body, and in many vehicles that is achieved with a thermoplastic rotomolded tube that, over time, has a potential to develop cracks in its flexible bellows. A crack in that part results in rough engine idle with compromised drivability and an instant check engine light, not to mention an. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy intake made from?\u003c\/strong\u003e The official listing describes mandrel bent stainless tube and five layer reinforced high temp silicone couplers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat warranty comes with the 15-19 Legacy intake?\u003c\/strong\u003e Lifetime warranty, as stated by the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nameless Performance","offers":[{"title":"Wrinkle Black","offer_id":68115368738918,"sku":"IN-TO-2-BLK-A-15LEG25i","price":335.0,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Red","offer_id":68115368771686,"sku":"IN-TO-2-RED-A-15LEG25i","price":335.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/1699040077.1280.1280__56505__27977__81204.1706403248.png?v=1794837508"},{"product_id":"nameless-performance-15-19-legacy-axleback-exhaust-muffler-delete","title":"Nameless Performance [15-19 Legacy] Axleback Exhaust - Muffler Delete","description":"\u003cp\u003eDesigned for the 2015-2017 Subaru Legacy 2.5i with single exit exhaust, the Nameless Performance Axleback Exhaust is a direct factory fit to the OEM midpipe. Removing the factory 13.5lb mufflers in lieu of a mandrel bent, TIG welded, T304 stainless steel construction muffler delete or muffled axleback exhaust, saves weight and gives you a great soundtrack to enhance your drive. Available with our great sounding 5\" mufflers, in muffler delete, or dial chamber no drone configurations, we have the sound level you are looking for. Factory fit laser cut flanges and 2″ piping is larger than factory midpipe diameter, providing excellent breathing characteristics for high end horsepower as well as retaining low end torque. And as always, our systems include gaskets and top notch metric hardware for quick and easy installation. Muffler Options: Muffler Delete (this product): The loudest option. Removes the mufflers entirely. Has a full range of tone featuring highs, mids, lows. On its own, the muffler delete with a stock midpipe and downpipe is similar to most catback exhausts in terms of sound level. 5\" Mufflers : Perfect for those looking for a subtle upgrade. The mufflers cancel more of the highs and midrange tones leaving a deep tone that is quieter than most catback exhausts on the market at cruise and idle, but still has a nice bark at wide open throttle. Tip: 4\" In-House TIG Welded Single Wall Tips.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for the 2015-2017 Subaru Legacy 2.5i with single exit exhaust, the Nameless Performance Axleback Exhaust is a direct factory fit to the OEM midpipe. Removing the factory 13.5lb mufflers in lieu of a mandrel bent, TIG welded, T304 stainless steel construction muffler delete or muffled axleback exhaust, saves weight and gives you a great soundtrack to enhance your drive. Available with our great sounding 5\" mufflers, in muffler delete, or dial chamber no drone configurations, we have the sound level you are looking for\u003c\/li\u003e\n\u003cli\u003eFactory fit laser cut flanges and 2″ piping is larger than factory midpipe diameter, providing excellent breathing characteristics for high end horsepower as well as retaining low end torque\u003c\/li\u003e\n\u003cli\u003eAnd as always, our systems include gaskets and top notch metric hardware for quick and easy installation\u003c\/li\u003e\n\u003cli\u003eMuffler Delete (this product):\u003c\/li\u003e\n\u003cli\u003eThe loudest option. Removes the mufflers entirely. Has a full range of tone featuring highs, mids, lows. On its own, the muffler delete with a stock midpipe and downpipe is similar to most catback exhausts in terms of sound level\u003c\/li\u003e\n\u003cli\u003ePerfect for those looking for a subtle upgrade. The mufflers cancel more of the highs and midrange tones leaving a deep tone that is quieter than most catback exhausts on the market at cruise and idle, but still has a nice bark at wide open throttle\u003c\/li\u003e\n\u003cli\u003e4\" In-House TIG Welded Single Wall Tips\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest axleback exhaust for 15-19 Legacy?\u003c\/strong\u003e Designed for the 2015-2017 Subaru Legacy 2.5i with single exit exhaust, the Nameless Performance Axleback Exhaust is a direct factory fit to the OEM midpipe. Removing the factory 13.5lb mufflers in lieu of a mandrel bent, TIG welded, T304 stainless steel construction muffler delete or muffled axleback exhaust, saves weight and gives you a great soundtrack to enhance your drive. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy axleback exhaust made from?\u003c\/strong\u003e The official listing describes T304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow loud is the 15-19 Legacy axleback exhaust?\u003c\/strong\u003e Removing the factory 13.5lb mufflers in lieu of a mandrel bent, TIG welded, T304 stainless steel construction muffler delete or muffled axleback exhaust, saves weight and gives you a great soundtrack to enhance your drive. Available with our great sounding 5\" mufflers, in muffler delete, or dial chamber no drone configurations, we have the sound level you.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrading to Nameless Performance urethane exhaust hanger bushings is recommended. The softer factory rubber bushings can let the exhaust move during hard cornering or on an incline, which may cause noise or let the tips contact the bumper.\u003c\/p\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115416383590,"sku":"SUAB15L25-0MU-40SWS","price":294.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/2.5i-0MU__13351__26864__40354.1652992565.1280.1280__50078__69934.1761931623.png?v=1794837728"},{"product_id":"nameless-performance-15-19-legacy-midpipe-2-25","title":"Nameless Performance [15-19 Legacy] Midpipe (2.25\")","description":"\u003cp\u003eNEW from Nameless Performance, Inc. is our 2.25\" Midpipe for the 2015-2019 Subaru Legacy 3.6R. Let that awesome Subaru 3.6R engine breathe and you will be rewarded with a more aggressive sound, though a little less than the 3\" Midpipe and better performance characteristics! Made from 3\" T304 Stainless Steel, our midpipe is designed to work with both factory downpipes and factory axleback exhausts, in addition to our parts. This 2.25\" section also includes a 3\" resonator to help reduce exhaust drone. The included 'S' pipe is 2.25\" with a mandrel bends throughout for a smooth exhaust flow. You will not find any crush bends here. This part is compatible with Subaru Legacy with the 3.6R Engine. Built entirely in our shop in Woodland, Washington, the Nameless Performance Subaru Outback 3.6R Midpipe features superior quality TIG welded, American Sourced T304 stainless tubing throughout. Comes will all necessary hardware and gaskets for the installation. Installation Instructions: Installation Guide - Axleback\/Catback\/Midpipe.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNEW from Nameless Performance, Inc. is our 2.25\" Midpipe for the 2015-2019 Subaru Legacy 3.6R. Let that awesome Subaru 3.6R engine breathe and you will be rewarded with a more aggressive sound, though a little less than the 3\" Midpipe and better performance characteristics!\u003c\/li\u003e\n\u003cli\u003eMade from 3\" T304 Stainless Steel, our midpipe is designed to work with both factory downpipes and factory axleback exhausts, in addition to our parts. This 2.25\" section also includes a 3\" resonator to help reduce exhaust drone\u003c\/li\u003e\n\u003cli\u003eThe included 'S' pipe is 2.25\" with a mandrel bends throughout for a smooth exhaust flow. You will not find any crush bends here\u003c\/li\u003e\n\u003cli\u003eThis part is compatible with Subaru Legacy with the 3.6R Engine\u003c\/li\u003e\n\u003cli\u003eBuilt entirely in our shop in Woodland, Washington, the Nameless Performance Subaru Outback 3.6R Midpipe features superior quality TIG welded, American Sourced T304 stainless tubing throughout\u003c\/li\u003e\n\u003cli\u003eComes will all necessary hardware and gaskets for the installation\u003c\/li\u003e\n\u003cli\u003eInstallation Instructions:\u003c\/li\u003e\n\u003cli\u003eInstallation Guide - Axleback\/Catback\/Midpipe\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest midpipe for 15-19 Legacy?\u003c\/strong\u003e NEW from Nameless Performance, Inc. is our 2.25\" Midpipe for the 2015-2019 Subaru Legacy 3.6R. Let that awesome Subaru 3.6R engine breathe and you will be rewarded with a more aggressive sound, though a little less than the 3\" Midpipe and better performance characteristics!. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy midpipe made from?\u003c\/strong\u003e The official listing describes American Sourced T304 stainless tubing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the 15-19 Legacy midpipe?\u003c\/strong\u003e This 2.25\" section also includes a 3\" resonator to help reduce exhaust drone The included 'S' pipe is 2.25\" with a mandrel bends throughout for a smooth exhaust flow.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrading to Nameless Performance urethane exhaust hanger bushings is recommended. The softer factory rubber bushings can let the exhaust move during hard cornering or on an incline, which may cause noise or let the tips contact the bumper.\u003c\/p\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115448365158,"sku":"SUMP15LEG36R225","price":893.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/SUMP15OB36R225-Flag-sm__47494.1762472568.1280.1280__16165.1772229100.1280.1280__52006.1772229278.jpg?v=1794837902"},{"product_id":"nameless-performance-15-19-legacy-axleback-exhaust-5-muffler","title":"Nameless Performance [15-19 Legacy] Axleback Exhaust - 5\" Muffler","description":"\u003cp\u003eDesigned for the 2018-2019 Subaru Legacy 2.5i with single exit exhaust. Our Nameless Performance Axleback Exhaust system is a simple and direct bolt on to the OEM midpipe. By removing the heavy factory 13.5lb mufflers in exchange for our T304 stainless steel, mandrel bent and tig welded system, you not only get great sound but also some extra grunt. Available in muffled or muffler delete configurations this axleback exhaust will give you the exact sound and look you want! Featuring factory fit laser cut flanges and 2″ piping that is larger than the diameter of the factory midpipe, this system flows! Providing excellent breathing characteristics for high end horsepower as well as retaining low end torque. Fits 2018-2019 Legacy 2.5i Sedan, and includes a new hardware kit for installation. Factory exhaust trim ring must be removed (two bolts) in order to fit upgraded exhaust. Muffler Configuration: 5\" Mufflers: Our most quiet option. Perfect for those looking for a subtle upgrade. The mufflers cancel more of the highs and midrange tones leaving a deep tone that is quieter than most catback exhausts on the market at cruise and idle, but still has a nice bark at wide open throttle. Tip: 4\" In-House TIG Welded Single Wall Tips.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for the 2018-2019 Subaru Legacy 2.5i with single exit exhaust. Our Nameless Performance Axleback Exhaust system is a simple and direct bolt on to the OEM midpipe. By removing the heavy factory 13.5lb mufflers in exchange for our T304 stainless steel, mandrel bent and tig welded system, you not only get great sound but also some extra grunt. Available in muffled or muffler delete configurations this axleback exhaust will give you the exact sound and look you want!\u003c\/li\u003e\n\u003cli\u003eFeaturing factory fit laser cut flanges and 2″ piping that is larger than the diameter of the factory midpipe, this system flows! Providing excellent breathing characteristics for high end horsepower as well as retaining low end torque\u003c\/li\u003e\n\u003cli\u003eFits 2018-2019 Legacy 2.5i Sedan, and\u003c\/li\u003e\n\u003cli\u003eincludes a new hardware kit\u003c\/li\u003e\n\u003cli\u003efor installation. Factory exhaust trim ring must be removed (two bolts) in order to fit upgraded exhaust\u003c\/li\u003e\n\u003cli\u003eOur most quiet option. Perfect for those looking for a subtle upgrade. The mufflers cancel more of the highs and midrange tones leaving a deep tone that is quieter than most catback exhausts on the market at cruise and idle, but still has a nice bark at wide open throttle\u003c\/li\u003e\n\u003cli\u003e4\" In-House TIG Welded Single Wall Tips\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest axleback exhaust for 15-19 Legacy?\u003c\/strong\u003e Designed for the 2018-2019 Subaru Legacy 2.5i with single exit exhaust. Our Nameless Performance Axleback Exhaust system is a simple and direct bolt on to the OEM midpipe. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy axleback exhaust made from?\u003c\/strong\u003e The official listing describes T304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the 15-19 Legacy axleback exhaust?\u003c\/strong\u003e Fits 2018-2019 Legacy 2.5i Sedan, and includes a new hardware kit for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrading to Nameless Performance urethane exhaust hanger bushings is recommended. The softer factory rubber bushings can let the exhaust move during hard cornering or on an incline, which may cause noise or let the tips contact the bumper.\u003c\/p\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115461832806,"sku":"SUAB18L25-5MU-40SWS","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/18_Leg-2.5i-5MU__24807__22469__92607.1652992693.1280.1280__39579__43953.1761932502.png?v=1794837985"},{"product_id":"nameless-performance-15-19-legacy-axleback-exhaust-dual-chamber-with-5-muffler","title":"Nameless Performance [15-19 Legacy] Axleback Exhaust - Dual Chamber with 5\" Muffler","description":"\u003cp\u003eSometimes you want to drive around unnoticed, sometimes you want to want to have aggressive sound now with our new Dual Chamber No Drone Exhaust systems you can have both! This system offers the same crisp exhaust notes that our 5\" muffled systems on the outside of the vehicle, while reducing cabin noise in the low RPM ranges. Literally the best of both worlds - ultra mild at cruise, and an appropriate growl inside and outside when you feel like doing some serious \"spirited driving\". Featuring both a 5\" conventional \"zero-restriction muffler\" and a frequency tuned \"helmholtz\" resonator, these systems are a perfect fit on your Forester. \"New helmholtz exhaust designed by @namelessperformance received and installed. Impressive build, quality, and sound... and most importantly for my wife, absolutely no drone in the cabin. Nameless hit a home run with this one. Thank you!\" was what our first customer had to say about this after driving the 5\" muffler and wanting to have less cabin noise.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSometimes you want to drive around unnoticed, sometimes you want to want to have aggressive sound now with our new Dual Chamber No Drone Exhaust systems you can have both!\u003c\/li\u003e\n\u003cli\u003eThis system offers the same crisp exhaust notes that our 5\" muffled systems on the outside of the vehicle, while reducing cabin noise in the low RPM ranges. Literally the best of both worlds - ultra mild at cruise, and an appropriate growl inside and outside when you feel like doing some serious \"spirited driving\"\u003c\/li\u003e\n\u003cli\u003eFeaturing both a 5\" conventional \"zero-restriction muffler\" and a frequency tuned \"helmholtz\" resonator, these systems are a perfect fit on your Forester\u003c\/li\u003e\n\u003cli\u003e\"New helmholtz exhaust designed by\u003c\/li\u003e\n\u003cli\u003ereceived and installed. Impressive build, quality, and sound... and most importantly for my wife, absolutely no drone in the cabin. Nameless hit a home run with this one. Thank you!\"\u003c\/li\u003e\n\u003cli\u003ewas what our first customer had to say about this after driving the 5\" muffler and wanting to have less cabin noise\u003c\/li\u003e\n\u003cli\u003eBuilt entirely in our shop in Woodland, Washington, the Nameless Performance Dual Chamber Exhaust is a direct factory fit to the OEM midpipe on the 2015-2017 Legacy 2.5i, and features superior quality TIG welded, American Sourced T304 stainless tubing throughout\u003c\/li\u003e\n\u003cli\u003eThe factory fit flange features laser cut precision, and our in-house Ercolina CNC mandrel bender produces the 2″ stainless primary and secondary chamber tubing, providing excellent breathing characteristics for high end horsepower as well as retaining low end torque. All tubing as well as the muffler and resonator bodies feature a brushed finish unique to our production process\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest axleback exhaust for 15-19 Legacy?\u003c\/strong\u003e Sometimes you want to drive around unnoticed, sometimes you want to want to have aggressive sound now with our new Dual Chamber No Drone Exhaust systems you can have both! This system offers the same crisp exhaust notes that our 5\" muffled systems on the outside of the vehicle, while reducing cabin noise in the low RPM ranges. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy axleback exhaust made from?\u003c\/strong\u003e The official listing describes American Sourced T304 stainless tubing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrading to Nameless Performance urethane exhaust hanger bushings is recommended. The softer factory rubber bushings can let the exhaust move during hard cornering or on an incline, which may cause noise or let the tips contact the bumper.\u003c\/p\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115471630438,"sku":"SUAB15L25-5MU-40SWS-DC","price":543.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/Legacy_Axle_Back__29376__80806__28294__60331.1743180946.png?v=1794838050"},{"product_id":"nameless-performance-10-14-outback-legacy-15-19-outback-legacy-intake","title":"Nameless Performance [10-19 Outback\/Legacy] Intake","description":"\u003cp\u003eAdd midrange torque and horsepower on your flat six with an intake that is built to last. Sometimes a product is designed to solve one issue, but the benefits go far beyond expectation. In the case of our new factory replacement intake system, we designed to remedy the regular failure of the factory plastic intake tube, and got the result of significant power gains.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdd midrange torque and horsepower on your flat six with an intake that is built to last\u003c\/li\u003e\n\u003cli\u003eSometimes a product is designed to solve one issue, but the benefits go far beyond expectation. In the case of our new factory replacement intake system, we designed to remedy the regular failure of the factory plastic intake tube, and got the result of significant power gains\u003c\/li\u003e\n\u003cli\u003eThe factory intake tube connects the airbox and mass airflow sensor to the throttle body, and in the case of the 3.6R that is achieved with a thermoplastic rotomolded tube that, over time, has a potential to develop cracks in its flexible bellows. A crack in that part results in rough engine idle with compromised driveability and an instant check engine light, not to mention an intake system that is directly ingesting underhood dirt and grime. Nobody wants that. And thermoplastics are always in a state of entropy, especially so in high temperature environments like an engine bay\u003c\/li\u003e\n\u003cli\u003eThe upgrade is here: our system replaces that entire themoplastic intake and flow disrupting silencer assembly with a mandrel bent stainless tube and five layer reinforced high temp silicone couplers. The factory breather tube connection is retained and the breather fitting is made of billet stainless steel and TIG welded in place. The result is a replacement part that has improved function and form\u003c\/li\u003e\n\u003cli\u003eWe didn't intend to spend time bringing this product to the dyno, but after the initial installation on our test car, customer reaction to the improved power was significant. They noticed the difference within the first half mile of leaving the shop, and continued to remark about what a difference the system made in midrange pickup during regular driving. So we put the car back to stock and tossed it on the dyno, then swapped this replacement intake on and ran it again. The gains were significant - with over 15ft lb of torque and horsepower to the wheels at 5200rpm and a significant amount across the entire powerband, averaging 7hp and 8ft lb from take off to redline. That's a noticeable difference - and the design provides an underhood solution that you can buy once and have last the life of your car\u003c\/li\u003e\n\u003cli\u003eOur classic wrinkle black powdercoating options are back for this new product line. The powdercoat provides enough texture to give a good match for most other red powdercoated parts on the market as well as having the ability to be easily wiped down and kept clean. Looking for a custom color? Our unfinished \/ brushed stainless option can be had by requesting it in the notes of your order and you can customize the part in the finish of your choice or keep the part brushed if that fits your goals for your build\u003c\/li\u003e\n\u003cli\u003eDon't let the time honored tradition of a cracked factory intake tube leave you stranded - upgrade before that happens and save yourself a tow, or an even bigger headache in the backcountry. The every day improvement in power and responsiveness will remind you that you made the right choice\u003c\/li\u003e\n\u003cli\u003eFits: 2010-2014 Outback\/Legacy, 2015-2019 Outback\/Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest intake for 10-19 Outback\/Legacy?\u003c\/strong\u003e Add midrange torque and horsepower on your flat six with an intake that is built to last. Sometimes a product is designed to solve one issue, but the benefits go far beyond expectation. Fits 2010-2014 Outback\/Legacy, 2015-2019 Outback\/Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 10-19 Outback\/Legacy intake made from?\u003c\/strong\u003e The official listing describes mandrel bent stainless tube and five layer reinforced high temp silicone couplers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat warranty comes with the 10-19 Outback\/Legacy intake?\u003c\/strong\u003e Lifetime warranty, as stated by the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nameless Performance","offers":[{"title":"Wrinkle Black","offer_id":68115494240358,"sku":"IN-TO-1-BLK-F-15OB36R","price":335.0,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Red","offer_id":68115494273126,"sku":"IN-TO-1-RED-F-15OB36R","price":335.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/1699040077.1280.1280__56505__27977__81284.1706403624.png?v=1794838196"},{"product_id":"nameless-performance-15-19-legacy-catback-exhaust-5-muffler","title":"Nameless Performance [15-19 Legacy] Catback Exhaust - 5\" Muffler","description":"\u003cp\u003e2018-19 Legacy 3.6R 5\" Muffled Catback Exhaust The sweet sound of your 3.6R flat six at full song is right around the corner. Whether your factory exhaust is ready for a refresh or you're just looking for a more lively driving experience, this bolt-up stainless system designed specifically for your 2018-2019 model year car is a great solution. The Subaru EZ series engines sound incredible. Every time we fire one up after installing an exhaust it just brings a smile to our face. Lets do the same for you. Featuring industry leading design and manufacturing, our catback exhaust system for the Legacy 3.6R is a direct factory fit to the factory exhaust manifold and catalytic converters. Removing the two very heavy factory mufflers in lieu of lightweight stainless mandrel bent and TIG welded units from Nameless Performance featuring in-house hand built stainless mufflers. The midpipe gets upgraded to a 3\" system with a resonated center section and v-band connections throughout for easy installation and longevity. Get the look and sound you want. This configuration features our 5\" mufflers with a warm sport exhaust note, nothing too crazy, just enough to hear the sound of that sweet six cylinder engine Subaru engine. The exhaust installs in a snap, just two bolts and five exhaust hanger bushings to remove the factory exhaust. Optionally install the upgraded exhaust with four of our standard urethane exhaust hanger bushings to more firmly hold the upgraded exhaust in place if you plan on any serious driving or off-roading the vehicle substantially. Or, if you just like upgrading things to upgrade them. Your secret is safe with us. Design Specifications: Configurable: Choose a muffled, non-muffled or dual chamber dual exit system to achieve your desired sound level and tone. This configuration features the 5\" muffled setup. CNC Mandrel Bent Tubing: Using our Ercolina CNC Mandrel Bender, we bend all of the tubing for our exhaust systems in-house, and we take great care to control our bending process for high-flow function and attractive cosmetic appearance. All of the tubing features a #4 brushed finish, including the finish on the hand built exhaust tips. 100% T304 Stainless Steel Construction, Precision Fabricated and Fitted Weldment: All of our exhaust systems start with superior in-house cutting and forming of all of the core components that go into the construction of our exhausts. And whether it's being painstakingly intolerant with sizing of mating parts to ensure a perfect weld, or taking the extra time to develop Go\/No-Go fixturing and using a CNC press brake to ensure repeatable exhaust hanger positioning, we put in the extra effort so that you get a superior product. Hand TiG Welded: A huge portion of what makes our exhaust systems the quality and look that our customers expect is that all of our systems are hand TIG welded rather than auto-TIG welded like much of our overseas competition. Our exhausts are welded by hand, by a human operator who has control over all of the variables of the welding process to achieve a superior weld form. Superior Muffler Design: Featuring a proprietary medium density ceramic wool packing material, proprietary stamped inlets and outlet caps for long term structural integrity, our mufflers retain their sound for years, and resist blowouts like can be found in the competition, many of whom simply use light density fiberglass packing similar to house insulation in their mufflers. While the competition often times doesn't fully pack out mufflers and resonators, our vehicle-specific pre-cut packing blanks ensure that every customer gets the same sound and the same longevity of performance. Solid Hanger Bars: Our T304 Exhaust Hanger Bars integrated into all of our exhaust systems are made from solid bar stock, ensuring that your exhaust fits out of the box and stays where you left it. They are CNC formed for a perfect fit. This is another area where we differ from the competition. Most commercially available exhaust hangers are tubular and 400 series ferric stainless prone to excessive surface rust. Great Look: Upgrade your factory plastic trim rings to our stainless single wall polished and TIG welded exhaust tips for an improved look to go with the improved sound of your exhaust. Fits 2018-2019 Legacy 3.6R. While some customers have managed to equip this dual exit system to the 2.5l models, it is designed for the 3.6l engines with a larger than stock 3\" midpipe which isn't best suited to the 2.5l engines. If you have a 2015-2017 model, be sure to check out the equivalent product for your year range that fits with your specific bumper. There was a facelift at the 2018 model year and tip locations changed so the two ranges are not compatible. Includes a new hardware kit for installation. Muffler Configuration: 5\" Mufflers: Providing a deeper tone and quieter overall sound at the back of the car, these provide a great improvement to the factory exhaust note and performance while providing more range of throttle before they come to life. Recommended Add-Ons: Exhaust Hanger Bushings Upgrading to our long lasting Nameless Performance urethane exhaust bushings from the factory rubber bushings is highly recommended. The softer rubber factory bushings are overly flexible and if you race your car or spend time at an incline off-road, the exhaust can \"wag\" left to right which sometimes causes noise or the tips to touch the rear bumper. When this happens there is a chance your bumper can be damaged or if you have a hitch or any other accessories can cause annoying sounds. The best way to avoid this is to use our urethane exhaust bushings to hold the exhaust in place. These upgraded bushings are not necessary to install our exhaust systems but for the small cost of upgraded units, it is an excellent idea! Add 1 Bushing to your cart : Upgrade the one bushing on the midpipe portion of the exhaust. Add 4 Bushings to your cart : Upgrade all 4 rubber bushings on the axleback portion of the exhaust. Add 5 Bushings to your cart : Upgrade all 5 of the factory rubber bushings from the midpipe back. Exhaust Hanger Bushing Removal Tool This tool makes removing the hanger bushings a breeze. We highly recommend this tool , it turns the removal process from frustrating to satisfying. Easily remove hanger bushings High Quality Steel Construction Add an Exhaust Hanger Bushing Removal Tool to your cart (US Shipping) Add an Exhaust Hanger Bushing Removal Tool to your cart (International Shipping).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2018-19 Legacy 3.6R 5\" Muffled Catback Exhaust\u003c\/li\u003e\n\u003cli\u003eThe sweet sound of your 3.6R flat six at full song is right around the corner. Whether your factory exhaust is ready for a refresh or you're just looking for a more lively driving experience, this bolt-up stainless system designed specifically for your 2018-2019 model year car is a great solution\u003c\/li\u003e\n\u003cli\u003eThe Subaru EZ series engines sound incredible. Every time we fire one up after installing an exhaust it just brings a smile to our face. Lets do the same for you. Featuring industry leading design and manufacturing, our catback exhaust system for the Legacy 3.6R is a direct factory fit to the factory exhaust manifold and catalytic converters. Removing the two very heavy factory mufflers in lieu of lightweight stainless mandrel bent and TIG welded units from Nameless Performance featuring in-house hand built stainless mufflers. The midpipe gets upgraded to a 3\" system with a resonated center section and v-band connections throughout for easy installation and longevity. Get the look and sound you want. This configuration features our 5\" mufflers with a warm sport exhaust note, nothing too crazy, just enough to hear the sound of that sweet six cylinder engine Subaru engine\u003c\/li\u003e\n\u003cli\u003eThe exhaust installs in a snap, just two bolts and five exhaust hanger bushings to remove the factory exhaust. Optionally install the upgraded exhaust with four of our standard urethane exhaust hanger bushings to more firmly hold the upgraded exhaust in place if you plan on any serious driving or off-roading the vehicle substantially. Or, if you just like upgrading things to upgrade them. Your secret is safe with us\u003c\/li\u003e\n\u003cli\u003eChoose a muffled, non-muffled or dual chamber dual exit system to achieve your desired sound level and tone. This configuration features the 5\" muffled setup\u003c\/li\u003e\n\u003cli\u003eUsing our Ercolina CNC Mandrel Bender, we bend all of the tubing for our exhaust systems in-house, and we take great care to control our bending process for high-flow function and attractive cosmetic appearance. All of the tubing features a #4 brushed finish, including the finish on the hand built exhaust tips\u003c\/li\u003e\n\u003cli\u003e100% T304 Stainless Steel Construction, Precision Fabricated and Fitted Weldment:\u003c\/li\u003e\n\u003cli\u003eAll of our exhaust systems start with superior in-house cutting and forming of all of the core components that go into the construction of our exhausts. And whether it's being painstakingly intolerant with sizing of mating parts to ensure a perfect weld, or taking the extra time to develop Go\/No-Go fixturing and using a CNC press brake to ensure repeatable exhaust hanger positioning, we put in the extra effort so that you get a superior product\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest catback exhaust for 15-19 Legacy?\u003c\/strong\u003e 2018-19 Legacy 3.6R 5\" Muffled Catback Exhaust The sweet sound of your 3.6R flat six at full song is right around the corner. Whether your factory exhaust is ready for a refresh or you're just looking for a more lively driving experience, this bolt-up stainless system designed specifically for your 2018-2019 model year car is a great solution. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy catback exhaust made from?\u003c\/strong\u003e The official listing describes T304 Stainless Steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the 15-19 Legacy catback exhaust?\u003c\/strong\u003e Includes a new hardware kit for installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115497091174,"sku":"SUCB18LEG-5MU","price":1512.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/2015-2018_Legacy_3.6R_Catback_5in_Muffler.flag__68038.1748979026.jpg?v=1794838215"},{"product_id":"nameless-performance-15-19-legacy-axleback-exhaust-5-muffler-2","title":"Nameless Performance [15-19 Legacy] Axleback Exhaust - 5\" Muffler","description":"\u003cp\u003eDesigned for the 2015-2017 Subaru Legacy 2.5i with single exit exhaust, the Nameless Performance Axleback Exhaust is a direct factory fit to the OEM midpipe. Removing the factory 13.5lb mufflers in lieu of a mandrel bent, TIG welded, T304 stainless steel construction muffler delete or muffled axleback exhaust, saves weight and gives you a great soundtrack to enhance your drive. Available with our great sounding 5\" mufflers, in muffler delete, or dial chamber no drone configurations, we have the sound level you are looking for. Factory fit laser cut flanges and 2″ piping is larger than factory midpipe diameter, providing excellent breathing characteristics for high end horsepower as well as retaining low end torque. And as always, our systems include gaskets and top notch metric hardware for quick and easy installation. Muffler Options: Muffler Delete : The loudest option. Removes the mufflers entirely. Has a full range of tone featuring highs, mids, lows. On its own, the muffler delete with a stock midpipe and downpipe is similar to most catback exhausts in terms of sound level. 5\" Mufflers (this product): Perfect for those looking for a subtle upgrade. The mufflers cancel more of the highs and midrange tones leaving a deep tone that is quieter than most catback exhausts on the market at cruise and idle, but still has a nice bark at wide open throttle. Tip: 4\" In-House TIG Welded Single Wall Tips.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for the 2015-2017 Subaru Legacy 2.5i with single exit exhaust, the Nameless Performance Axleback Exhaust is a direct factory fit to the OEM midpipe. Removing the factory 13.5lb mufflers in lieu of a mandrel bent, TIG welded, T304 stainless steel construction muffler delete or muffled axleback exhaust, saves weight and gives you a great soundtrack to enhance your drive. Available with our great sounding 5\" mufflers, in muffler delete, or dial chamber no drone configurations, we have the sound level you are looking for\u003c\/li\u003e\n\u003cli\u003eFactory fit laser cut flanges and 2″ piping is larger than factory midpipe diameter, providing excellent breathing characteristics for high end horsepower as well as retaining low end torque\u003c\/li\u003e\n\u003cli\u003eAnd as always, our systems include gaskets and top notch metric hardware for quick and easy installation\u003c\/li\u003e\n\u003cli\u003eThe loudest option. Removes the mufflers entirely. Has a full range of tone featuring highs, mids, lows. On its own, the muffler delete with a stock midpipe and downpipe is similar to most catback exhausts in terms of sound level\u003c\/li\u003e\n\u003cli\u003e5\" Mufflers (this product):\u003c\/li\u003e\n\u003cli\u003ePerfect for those looking for a subtle upgrade. The mufflers cancel more of the highs and midrange tones leaving a deep tone that is quieter than most catback exhausts on the market at cruise and idle, but still has a nice bark at wide open throttle\u003c\/li\u003e\n\u003cli\u003e4\" In-House TIG Welded Single Wall Tips\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest axleback exhaust for 15-19 Legacy?\u003c\/strong\u003e Designed for the 2015-2017 Subaru Legacy 2.5i with single exit exhaust, the Nameless Performance Axleback Exhaust is a direct factory fit to the OEM midpipe. Removing the factory 13.5lb mufflers in lieu of a mandrel bent, TIG welded, T304 stainless steel construction muffler delete or muffled axleback exhaust, saves weight and gives you a great soundtrack to enhance your drive. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy axleback exhaust made from?\u003c\/strong\u003e The official listing describes T304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow loud is the 15-19 Legacy axleback exhaust?\u003c\/strong\u003e Removing the factory 13.5lb mufflers in lieu of a mandrel bent, TIG welded, T304 stainless steel construction muffler delete or muffled axleback exhaust, saves weight and gives you a great soundtrack to enhance your drive. Available with our great sounding 5\" mufflers, in muffler delete, or dial chamber no drone configurations, we have the sound level you.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrading to Nameless Performance urethane exhaust hanger bushings is recommended. The softer factory rubber bushings can let the exhaust move during hard cornering or on an incline, which may cause noise or let the tips contact the bumper.\u003c\/p\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115514359910,"sku":"SUAB15L25-5MU-40SWS","price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/2.5i-5MU__57365__40172__46266.1652992565.1280.1280__94301__41909.1761931679.png?v=1794838323"},{"product_id":"nameless-performance-15-19-legacy-catback-exhaust-5-muffler-2","title":"Nameless Performance [15-19 Legacy] Catback Exhaust - 5\" Muffler","description":"\u003cp\u003e2015-17 Legacy 3.6R 5\" Muffled Catback Exhaust The sweet sound of your 3.6R flat six at full song is right around the corner. Whether your factory exhaust is ready for a refresh or you're just looking for a more lively driving experience, this bolt-up stainless system designed specifically for your 2015, 2016 or 2017 model year car is a great solution. The Subaru EZ series engines sound incredible. Every time we fire one up after installing an exhaust it just brings a smile to our face. Lets do the same for you. Featuring industry leading design and manufacturing, our catback exhaust system for the Legacy 3.6R is a direct factory fit to the factory exhaust manifold and catalytic converters. Removing the two very heavy factory mufflers in lieu of lightweight stainless mandrel bent and TIG welded units from Nameless Performance featuring in-house hand built stainless mufflers. The midpipe gets upgraded to a 3\" system with a resonated center section and V-band connections throughout for easy installation and longevity. Get the look and sound you want. This configuration features our 5\" mufflers with a warm sport exhaust note, nothing too crazy, just enough to hear the sound of that sweet six cylinder engine Subaru engine. The exhaust installs in a snap, just two bolts and five exhaust hanger bushings to remove the factory exhaust. Optionally install the upgraded exhaust with four of our standard urethane exhaust hanger bushings to more firmly hold the upgraded exhaust in place if you plan on any serious driving or off-roading the vehicle substantially. Or, if you just like upgrading things to upgrade them. Your secret is safe with us. Design Specifications: Configurable: Choose a muffled, non-muffled or dual chamber dual exit system to achieve your desired sound level and tone. This configuration features the 5\" muffled setup. CNC Mandrel Bent Tubing: Using our Ercolina CNC Mandrel Bender, we bend all of the tubing for our exhaust systems in-house, and we take great care to control our bending process for high-flow function and attractive cosmetic appearance. All of the tubing features a #4 brushed finish, including the finish on the hand built exhaust tips. 100% T304 Stainless Steel Construction, Precision Fabricated and Fitted Weldment: All of our exhaust systems start with superior in-house cutting and forming of all of the core components that go into the construction of our exhausts. And whether it's being painstakingly intolerant with sizing of mating parts to ensure a perfect weld, or taking the extra time to develop Go\/No-Go fixturing and using a CNC press brake to ensure repeatable exhaust hanger positioning, we put in the extra effort so that you get a superior product. Hand TiG Welded: A huge portion of what makes our exhaust systems the quality and look that our customers expect is that all of our systems are hand TIG welded rather than auto-TIG welded like much of our overseas competition. Our exhausts are welded by hand, by a human operator who has control over all of the variables of the welding process to achieve a superior weld form. Superior Muffler Design: Featuring a proprietary medium density ceramic wool packing material, proprietary stamped inlets and outlet caps for long term structural integrity, our mufflers retain their sound for years, and resist blowouts like can be found in the competition, many of whom simply use light density fiberglass packing similar to house insulation in their mufflers. While the competition often times doesn't fully pack out mufflers and resonators, our vehicle-specific pre-cut packing blanks ensure that every customer gets the same sound and the same longevity of performance. Solid Hanger Bars: Our T304 Exhaust Hanger Bars integrated into all of our exhaust systems are made from solid bar stock, ensuring that your exhaust fits out of the box and stays where you left it. They are CNC formed for a perfect fit. This is another area where we differ from the competition. Most commercially available exhaust hangers are tubular and 400 series ferric stainless prone to excessive surface rust. Great Look: Upgrade your factory plastic trim rings to our stainless single wall polished and TIG welded exhaust tips for an improved look to go with the improved sound of your exhaust. Fits 2015-2017 Legacy 3.6R. While some customers have managed to equip this dual exit system to the 2.5L models, it is designed for the 3.6L engines with a larger than stock 3\" midpipe which isn't best suited to the 2.5L engines. If you have a 2015-2017 model, be sure to check out the equivalent product for your year range that fits with your specific bumper. There was a facelift at the 2018 model year and tip locations changed so the two ranges are not compatible. Includes a new hardware kit for installation. Muffler Options: Muffler Delete : Say Howdy Get Rowdy, this system sounds amazing, but might get on your nerves a bit on longer drives and while you're under load at static RPM, but that'll be made up for by how great it sounds when you're driving the car at full song. If this is the exhaust for you, you'll likely know it in advance. If you're on the fence, definitely check out the muffled and dual chamber options we have for the Legacy 3.6R Catback. 5\" Mufflers (this product): Perfect for those looking for a subtle upgrade. The mufflers cancel more of the highs and midrange tones leaving a deep tone that is quieter than most catback exhausts on the market at cruise and idle, but still has a nice bark at wide open throttle. Tips: 4\" In-House TIG Welded Single Wall Tips.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2015-17 Legacy 3.6R 5\" Muffled Catback Exhaust\u003c\/li\u003e\n\u003cli\u003eThe sweet sound of your 3.6R flat six at full song is right around the corner. Whether your factory exhaust is ready for a refresh or you're just looking for a more lively driving experience, this bolt-up stainless system designed specifically for your 2015, 2016 or 2017 model year car is a great solution\u003c\/li\u003e\n\u003cli\u003eThe Subaru EZ series engines sound incredible. Every time we fire one up after installing an exhaust it just brings a smile to our face. Lets do the same for you. Featuring industry leading design and manufacturing, our catback exhaust system for the Legacy 3.6R is a direct factory fit to the factory exhaust manifold and catalytic converters. Removing the two very heavy factory mufflers in lieu of lightweight stainless mandrel bent and TIG welded units from Nameless Performance featuring in-house hand built stainless mufflers. The midpipe gets upgraded to a 3\" system with a resonated center section and V-band connections throughout for easy installation and longevity. Get the look and sound you want. This configuration features our 5\" mufflers with a warm sport exhaust note, nothing too crazy, just enough to hear the sound of that sweet six cylinder engine Subaru engine\u003c\/li\u003e\n\u003cli\u003eThe exhaust installs in a snap, just two bolts and five exhaust hanger bushings to remove the factory exhaust. Optionally install the upgraded exhaust with four of our standard urethane exhaust hanger bushings to more firmly hold the upgraded exhaust in place if you plan on any serious driving or off-roading the vehicle substantially. Or, if you just like upgrading things to upgrade them. Your secret is safe with us\u003c\/li\u003e\n\u003cli\u003eChoose a muffled, non-muffled or dual chamber dual exit system to achieve your desired sound level and tone. This configuration features the 5\" muffled setup\u003c\/li\u003e\n\u003cli\u003eUsing our Ercolina CNC Mandrel Bender, we bend all of the tubing for our exhaust systems in-house, and we take great care to control our bending process for high-flow function and attractive cosmetic appearance. All of the tubing features a #4 brushed finish, including the finish on the hand built exhaust tips\u003c\/li\u003e\n\u003cli\u003e100% T304 Stainless Steel Construction, Precision Fabricated and Fitted Weldment:\u003c\/li\u003e\n\u003cli\u003eAll of our exhaust systems start with superior in-house cutting and forming of all of the core components that go into the construction of our exhausts. And whether it's being painstakingly intolerant with sizing of mating parts to ensure a perfect weld, or taking the extra time to develop Go\/No-Go fixturing and using a CNC press brake to ensure repeatable exhaust hanger positioning, we put in the extra effort so that you get a superior product\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest catback exhaust for 15-19 Legacy?\u003c\/strong\u003e 2015-17 Legacy 3.6R 5\" Muffled Catback Exhaust The sweet sound of your 3.6R flat six at full song is right around the corner. Whether your factory exhaust is ready for a refresh or you're just looking for a more lively driving experience, this bolt-up stainless system designed specifically for your 2015, 2016 or 2017 model year car is a great solution. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy catback exhaust made from?\u003c\/strong\u003e The official listing describes T304 Stainless Steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the 15-19 Legacy catback exhaust?\u003c\/strong\u003e Includes a new hardware kit for installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115547914342,"sku":"SUCB15LEG-5MU","price":1507.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/2015-2018_Legacy_3.6R_Catback_5in_Muffler.flag__92235.1710261113.jpg?v=1794838555"},{"product_id":"nameless-performance-15-19-legacy-axleback-exhaust-muffler-delete-2","title":"Nameless Performance [15-19 Legacy] Axleback Exhaust - Muffler Delete","description":"\u003cp\u003eDesigned for the 2015-2017 Legacy 3.6R, the Nameless Performance Axleback Exhaust with Muffler Delete is a direct factory fit to the OEM midpipe at the Y. Removing the two factory 13.5lb mufflers in lieu of a pair of mandrel bent, TIG welded, T304 stainless steel pipes. Factory fit laser cut flanges and 2″ dual piping has equivalent cross sectional area of a 2.85″ straight pipe, providing excellent breathing characteristics for high end horsepower as well as retaining low end torque. Includes a new hardware kit for installation. *Note The 2015-2017 Legacy 3.6R comes equipped with a CVT transmission. Since the CVT keeps the RPMS constant there will be more audible cabin noise than with a standard automatic or a manual transmission vehicle. Muffler Options: Muffler Delete (this product): The loudest option. Removes the mufflers entirely. Has a full range of tone featuring highs, mids, lows. On its own, the muffler delete with a stock midpipe and downpipe is similar to most catback exhausts in terms of sound level. 5\" Mufflers : Perfect for those looking for a subtle upgrade. The mufflers cancel more of the highs and midrange tones leaving a deep tone that is quieter than most catback exhausts on the market at cruise and idle, but still has a nice bark at wide open throttle. Tips: 4\" In-House TIG Welded Single Wall Tips.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for the 2015-2017 Legacy 3.6R, the Nameless Performance Axleback Exhaust with Muffler Delete is a direct factory fit to the OEM midpipe at the Y. Removing the two factory 13.5lb mufflers in lieu of a pair of mandrel bent, TIG welded, T304 stainless steel pipes\u003c\/li\u003e\n\u003cli\u003eFactory fit laser cut flanges and 2″ dual piping has equivalent cross sectional area of a 2.85″ straight pipe, providing excellent breathing characteristics for high end horsepower as well as retaining low end torque\u003c\/li\u003e\n\u003cli\u003eIncludes a new hardware kit for installation\u003c\/li\u003e\n\u003cli\u003eNote The 2015-2017 Legacy 3.6R comes equipped with a CVT transmission. Since the CVT keeps the RPMS constant there will be more audible cabin noise than with a standard automatic or a manual transmission vehicle\u003c\/li\u003e\n\u003cli\u003eMuffler Delete (this product):\u003c\/li\u003e\n\u003cli\u003eThe loudest option. Removes the mufflers entirely. Has a full range of tone featuring highs, mids, lows. On its own, the muffler delete with a stock midpipe and downpipe is similar to most catback exhausts in terms of sound level\u003c\/li\u003e\n\u003cli\u003ePerfect for those looking for a subtle upgrade. The mufflers cancel more of the highs and midrange tones leaving a deep tone that is quieter than most catback exhausts on the market at cruise and idle, but still has a nice bark at wide open throttle\u003c\/li\u003e\n\u003cli\u003e4\" In-House TIG Welded Single Wall Tips\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest axleback exhaust for 15-19 Legacy?\u003c\/strong\u003e Designed for the 2015-2017 Legacy 3.6R, the Nameless Performance Axleback Exhaust with Muffler Delete is a direct factory fit to the OEM midpipe at the Y. Removing the two factory 13.5lb mufflers in lieu of a pair of mandrel bent, TIG welded, T304 stainless steel pipes. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy axleback exhaust made from?\u003c\/strong\u003e The official listing describes T304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the 15-19 Legacy axleback exhaust?\u003c\/strong\u003e Includes a new hardware kit for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrading to Nameless Performance urethane exhaust hanger bushings is recommended. The softer factory rubber bushings can let the exhaust move during hard cornering or on an incline, which may cause noise or let the tips contact the bumper.\u003c\/p\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115565805670,"sku":"SUAB15LEG-0MU","price":444.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/0MU-Axleback__41407__72349__03484.1652992656.1280.1280__75453__66496.1748991046.png?v=1794838686"},{"product_id":"nameless-performance-15-19-legacy-catback-exhaust-muffler-delete","title":"Nameless Performance [15-19 Legacy] Catback Exhaust - Muffler Delete","description":"\u003cp\u003eAggressive Subaru Legacy Catback Exhaust: Full sound with no restrictions. Give your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA. This muffled catback is painstakingly fabricated and hand TIG welded from the center resonator through our high flow muffler delete system and out the 4\" polished stainless single wall exhaust tip. What's better? The midpipe gives you better ground clearance than OEM and fits with the majority of trailer hitches on the market. This configuration is our unmuffled aggressive sound signature model that isn't afraid to bark at wide open throttle. Other configurations available feature larger mufflers and dual chamber drone cancelling designs - check them out on the main '15-'17 Subaru Legacy category . Benefits: Improved Ground Clearance: The midpipe in this catback is designed to tuck under the car better than factory for added ground clearance on lowered vehicles or adventures off road. Stainless Construction: No more wondering how many more days your factory resonator will last before it showers your plastic fuel tank with hot exhaust gas. Our parts feature real T304 certified stainless, not the cut rate stuff other brands often substitute. Longevity against the elements just leveled up! Glorious sound: With a warm tone at cruise and a clean interior sound note. Keep your foot light, it's warm and low key. Stomp the throttle, it comes to life. Want something more rowdy or more audible interior exhaust note? We offer those, too. Great Looks: Our hand finished brushed stainless tip is a tailored finishing touch that is easy to maintain and keep clean with scotch brite - easy to maintain - no museum white gloves required and no worries about scratching the polished finish if you want to wipe them off while you're getting gas.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAggressive Subaru Legacy Catback Exhaust: Full sound with no restrictions\u003c\/li\u003e\n\u003cli\u003eGive your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA. This muffled catback is painstakingly fabricated and hand TIG welded from the center resonator through our high flow muffler delete system and out the 4\" polished stainless single wall exhaust tip. What's better? The midpipe gives you better ground clearance than OEM and fits with the majority of trailer hitches on the market. This configuration is our unmuffled aggressive sound signature model that isn't afraid to bark at wide open throttle. Other configurations available feature larger mufflers and dual chamber drone cancelling designs - check them out on the main\u003c\/li\u003e\n\u003cli\u003e'15-'17 Subaru Legacy category\u003c\/li\u003e\n\u003cli\u003eImproved Ground Clearance:\u003c\/li\u003e\n\u003cli\u003eThe midpipe in this catback is designed to tuck under the car better than factory for added ground clearance on lowered vehicles or adventures off road\u003c\/li\u003e\n\u003cli\u003eNo more wondering how many more days your factory resonator will last before it showers your plastic fuel tank with hot exhaust gas. Our parts feature real T304 certified stainless, not the cut rate stuff other brands often substitute. Longevity against the elements just leveled up!\u003c\/li\u003e\n\u003cli\u003eWith a warm tone at cruise and a clean interior sound note. Keep your foot light, it's warm and low key. Stomp the throttle, it comes to life. Want something more rowdy or more audible interior exhaust note? We offer those, too\u003c\/li\u003e\n\u003cli\u003eOur hand finished brushed stainless tip is a tailored finishing touch that is easy to maintain and keep clean with scotch brite - easy to maintain - no museum white gloves required and no worries about scratching the polished finish if you want to wipe them off while you're getting gas\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest catback exhaust for 15-19 Legacy?\u003c\/strong\u003e Aggressive Subaru Legacy Catback Exhaust: Full sound with no restrictions. Give your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy catback exhaust made from?\u003c\/strong\u003e The official listing describes Give your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat warranty comes with the 15-19 Legacy catback exhaust?\u003c\/strong\u003e Lifetime warranty, as stated by the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrading to Nameless Performance urethane exhaust hanger bushings is recommended. The softer factory rubber bushings can let the exhaust move during hard cornering or on an incline, which may cause noise or let the tips contact the bumper.\u003c\/p\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115566362726,"sku":"SUCB15L25-0MU-40SWS","price":978.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/SUCB18L25-0MU-40SWS__01612.1761934714.jpg?v=1794838691"},{"product_id":"nameless-performance-15-19-legacy-catback-exhaust-muffler-delete-2","title":"Nameless Performance [15-19 Legacy] Catback Exhaust - Muffler Delete","description":"\u003cp\u003eAggressive Subaru Legacy Catback Exhaust: Full sound with no restrictions. Give your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA. This muffled catback is painstakingly fabricated and hand TIG welded from the center resonator through our high flow muffler delete system and out the 4\" polished stainless single wall exhaust tip. What's better? The midpipe gives you better ground clearance than OEM and fits with the majority of trailer hitches on the market. This configuration is our unmuffled aggressive sound signature model that isn't afraid to bark at wide open throttle. Other configurations available feature larger mufflers and dual chamber drone cancelling designs - check them out on the main '18-19 Subaru Legacy category . Benefits: Improved Ground Clearance: The midpipe in this catback is designed to tuck under the car better than factory for added ground clearance on lowered vehicles or adventures off road. Stainless Construction: No more wondering how many more days your factory resonator will last before it showers your plastic fuel tank with hot exhaust gas. Our parts feature real T304 certified stainless, not the cut rate stuff other brands often substitute. Longevity against the elements just leveled up! Glorious sound: With a warm tone at cruise and a clean interior sound note. Keep your foot light, it's warm and low key. Stomp the throttle, it comes to life. Great Looks: Our hand finished brushed stainless tip is a tailored finishing touch that is easy to maintain and keep clean with scotch brite - easy to maintain - no museum white gloves required and no worries about scratching the polished finish if you want to wipe them off while you're getting gas.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAggressive Subaru Legacy Catback Exhaust: Full sound with no restrictions\u003c\/li\u003e\n\u003cli\u003eGive your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA. This muffled catback is painstakingly fabricated and hand TIG welded from the center resonator through our high flow muffler delete system and out the 4\" polished stainless single wall exhaust tip. What's better? The midpipe gives you better ground clearance than OEM and fits with the majority of trailer hitches on the market. This configuration is our unmuffled aggressive sound signature model that isn't afraid to bark at wide open throttle. Other configurations available feature larger mufflers and dual chamber drone cancelling designs - check them out on the main\u003c\/li\u003e\n\u003cli\u003e'18-19 Subaru Legacy category\u003c\/li\u003e\n\u003cli\u003eImproved Ground Clearance:\u003c\/li\u003e\n\u003cli\u003eThe midpipe in this catback is designed to tuck under the car better than factory for added ground clearance on lowered vehicles or adventures off road\u003c\/li\u003e\n\u003cli\u003eNo more wondering how many more days your factory resonator will last before it showers your plastic fuel tank with hot exhaust gas. Our parts feature real T304 certified stainless, not the cut rate stuff other brands often substitute. Longevity against the elements just leveled up!\u003c\/li\u003e\n\u003cli\u003eWith a warm tone at cruise and a clean interior sound note. Keep your foot light, it's warm and low key. Stomp the throttle, it comes to life\u003c\/li\u003e\n\u003cli\u003eOur hand finished brushed stainless tip is a tailored finishing touch that is easy to maintain and keep clean with scotch brite - easy to maintain - no museum white gloves required and no worries about scratching the polished finish if you want to wipe them off while you're getting gas\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest catback exhaust for 15-19 Legacy?\u003c\/strong\u003e Aggressive Subaru Legacy Catback Exhaust: Full sound with no restrictions. Give your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy catback exhaust made from?\u003c\/strong\u003e The official listing describes Give your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow loud is the 15-19 Legacy catback exhaust?\u003c\/strong\u003e This muffled catback is painstakingly fabricated and hand TIG welded from the center resonator through our high flow muffler delete system and out the 4\" polished stainless single wall exhaust tip.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrading to Nameless Performance urethane exhaust hanger bushings is recommended. The softer factory rubber bushings can let the exhaust move during hard cornering or on an incline, which may cause noise or let the tips contact the bumper.\u003c\/p\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115592577126,"sku":"SUCB18L25-0MU-40SWS","price":978.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/SUCB18L25-0MU-40SWS__56330.1761934685.jpg?v=1794838954"},{"product_id":"nameless-performance-15-19-legacy-midpipe","title":"Nameless Performance [15-19 Legacy] Midpipe","description":"\u003cp\u003eComplete the catback on your '15-19 Subaru Legacy 2.5i Our Legacy midpipe is a significant development forward in our progress on industry leading sport exhaust note for the FB25 engine. Keeping sound levels down at constant RPM during cruising as well as during constant load climbing hills usually comes at the cost of the sound during harder acceleration. Our dual chamber axleback exhaust broke the mold on this concept, and for a while we thought we had landed on the perfect exhaust note, but now that we have the midpipe available, it's clear that an even better sound is available. Retaining the drone management of the axleback alone, completing your catback system with our 2015-2019 Subaru Legacy 2.5i midpipe brings more midrange tone to acceleration with a manageable increase in sound out the back of the car. This system is great for everything from carving your favorite backroads on the weekends, spending time off highway on gravel roads, or just driving to the grocery store. It fits in all environments. Featuring a proprietary in-house manufactured brushed stainless resonator, v-band connections and a 100% bolt-up factory fit design, this system is easy to install. Includes all hardware required for installation. Recommended Add-Ons: Exhaust Hanger Bushings Upgrading to our long lasting Nameless Performance urethane exhaust bushings from the factory rubber bushings is highly recommended. The softer rubber factory bushings are overly flexible and if you race your car or spend time at an incline off-road, the exhaust can \"wag\" left to right which sometimes causes noise or the tips to touch the rear bumper. When this happens there is a chance your bumper can be damaged or if you have a hitch or any other accessories can cause annoying sounds. The best way to avoid this is to use our urethane exhaust bushings to hold the exhaust in place. These upgraded bushings are not necessary to install our exhaust systems but for the small cost of upgraded units, it is an excellent idea! Add 1 Bushing to your cart : Upgrade the one bushing on the midpipe portion of the exhaust. Add 2 Bushings to your cart : Upgrade 2 rubber bushings on the axleback portion of the exhaust. Add 3 Bushings to your cart : Upgrade all 3 of the factory rubber bushings from the midpipe back. Exhaust Hanger Bushing Removal Tool This tool makes removing the hanger bushings a breeze. We highly recommend this tool , it turns the removal process from frustrating to satisfying. Easily remove hanger bushings High Quality Steel Construction Add an Exhaust Hanger Bushing Removal Tool to your cart (US Shipping) Add an Exhaust Hanger Bushing Removal Tool to your cart (International Shipping).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eComplete the catback on your '15-19 Subaru Legacy 2.5i\u003c\/li\u003e\n\u003cli\u003eOur Legacy midpipe is a significant development forward in our progress on industry leading sport exhaust note for the FB25 engine. Keeping sound levels down at constant RPM during cruising as well as during constant load climbing hills usually comes at the cost of the sound during harder acceleration. Our dual chamber axleback exhaust broke the mold on this concept, and for a while we thought we had landed on the perfect exhaust note, but now that we have the midpipe available, it's clear that an even better sound is available. Retaining the drone management of the axleback alone, completing your catback system with our 2015-2019 Subaru Legacy 2.5i midpipe brings more midrange tone to acceleration with a manageable increase in sound out the back of the car\u003c\/li\u003e\n\u003cli\u003eThis system is great for everything from carving your favorite backroads on the weekends, spending time off highway on gravel roads, or just driving to the grocery store. It fits in all environments\u003c\/li\u003e\n\u003cli\u003eFeaturing a proprietary in-house manufactured brushed stainless resonator, v-band connections and a 100% bolt-up factory fit design, this system is easy to install\u003c\/li\u003e\n\u003cli\u003eIncludes all hardware required for installation\u003c\/li\u003e\n\u003cli\u003eUpgrading to our long lasting Nameless Performance\u003c\/li\u003e\n\u003cli\u003efrom the factory rubber bushings is highly recommended. The softer rubber factory bushings are overly flexible and if you race your car or spend time at an incline off-road, the exhaust can \"wag\" left to right which sometimes causes noise or the tips to touch the rear bumper. When this happens there is a chance your bumper can be damaged or if you have a hitch or any other accessories can cause annoying sounds. The best way to avoid this is to use our urethane exhaust bushings to hold the exhaust in place. These upgraded bushings are not necessary to install our exhaust systems but for the small cost of upgraded units, it is an excellent idea!\u003c\/li\u003e\n\u003cli\u003eAdd 1 Bushing to your cart\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest midpipe for 15-19 Legacy?\u003c\/strong\u003e Complete the catback on your '15-19 Subaru Legacy 2.5i Our Legacy midpipe is a significant development forward in our progress on industry leading sport exhaust note for the FB25 engine. Keeping sound levels down at constant RPM during cruising as well as during constant load climbing hills usually comes at the cost of the sound during harder acceleration. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy midpipe made from?\u003c\/strong\u003e The official listing says: Featuring a proprietary in-house manufactured brushed stainless resonator, v-band connections and a 100% bolt-up factory fit design, this system is easy to install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the 15-19 Legacy midpipe?\u003c\/strong\u003e Includes all hardware required for installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115600343142,"sku":"SUMP15LEG2.5-RES","price":704.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/SUMP15LEG2.5-RES-nfs__97418.1759521883.jpg?v=1794839054"},{"product_id":"nameless-performance-15-19-legacy-catback-exhaust-muffler-delete-3","title":"Nameless Performance [15-19 Legacy] Catback Exhaust - Muffler Delete","description":"\u003cp\u003e2015-17 Legacy 3.6R Muffler Delete Catback: Aggressive Sound for Your Flat Six The sweet sound of your 3.6R flat six at full song is right around the corner. Whether your factory exhaust is ready for a refresh or you're just looking for a more lively driving experience, this bolt-up stainless system designed specifically for your 2015-2017 model year car is a great solution. The Subaru EZ series engines sound incredible. Every time we fire one up after installing an exhaust it just brings a smile to our face. Lets do the same for you. And what's better than a great sounding exhaust than a great sounding exhaust at full volume. This muffler delete version will turn heads from cold start to warm idle through parking lots and most definitely at full throttle. Featuring industry leading design and manufacturing, our catback exhaust system for the Legacy 3.6R is a direct factory fit to the factory exhaust manifold and catalytic converters. Removing the two very heavy factory mufflers in lieu of lightweight stainless mandrel bent and TIG welded dual straight exhaust results in a significant drop in weight. The midpipe gets upgraded to a 3\" system with a resonated center section and V-band connections throughout for easy installation and longevity. Get the look and sound you want. The exhaust installs in a snap, just two bolts and five exhaust hanger bushings to remove the factory exhaust. Optionally install the upgraded exhaust with four of our standard urethane exhaust hanger bushings to more firmly hold the upgraded exhaust in place if you plan on any serious driving or off-roading the vehicle substantially. Or, if you just like upgrading things to upgrade them. Your secret is safe with us. Design Specifications: Configurable: Choose a muffled, non-muffled or dual chamber dual exit system to achieve your desired sound level and tone. This configuration features the muffler delete setup. CNC Mandrel Bent Tubing: Using our Ercolina CNC Mandrel Bender, we bend all of the tubing for our exhaust systems in-house, and we take great care to control our bending process for high-flow function and attractive cosmetic appearance. All of the tubing features a #4 brushed finish, including the finish on the hand built exhaust tips. 100% T304 Stainless Steel Construction, Precision Fabricated and Fitted Weldment: All of our exhaust systems start with superior in-house cutting and forming of all of the core components that go into the construction of our exhausts. And whether it's being painstakingly intolerant with sizing of mating parts to ensure a perfect weld, or taking the extra time to develop Go\/No-Go fixturing and using a CNC press brake to ensure repeatable exhaust hanger positioning, we put in the extra effort so that you get a superior product. Hand TiG Welded: A huge portion of what makes our exhaust systems the quality and look that our customers expect is that all of our systems are hand TIG welded rather than auto-TIG welded like much of our overseas competition. Our exhausts are welded by hand, by a human operator who has control over all of the variables of the welding process to achieve a superior weld form. Superior Muffler Design: Muffler delete is the superior muffler. Solid Hanger Bars: Our T304 Exhaust Hanger Bars integrated into all of our exhaust systems are made from solid bar stock, ensuring that your exhaust fits out of the box and stays where you left it. They are CNC formed for a perfect fit. This is another area where we differ from the competition. Most commercially available exhaust hangers are tubular and 400 series ferric stainless prone to excessive surface rust. Great Look: Upgrade your factory plastic trim rings to our stainless single wall polished and TIG welded exhaust tips for an improved look to go with the improved sound of your exhaust. Fits 2015-2017 Legacy 3.6R. While some customers have managed to equip this dual exit system to the 2.5L models, it is designed for the 3.6L engines with a larger than stock 3\" midpipe which isn't best suited to the 2.5L engines. If you have a 2018-2019 model, be sure to check out the equivalent product for your year range that fits with your specific bumper. There was a facelift at the 2018 model year and tip locations changed so the two ranges are not compatible. Includes a new hardware kit for installation. Muffler Options: Muffler Delete (this product): Say Howdy Get Rowdy, this system sounds amazing, but might get on your nerves a bit on longer drives and while you're under load at static RPM, but that'll be made up for by how great it sounds when you're driving the car at full song. If this is the exhaust for you, you'll likely know it in advance. If you're on the fence, definitely check out the muffled and dual chamber options we have for the Legacy 3.6R Catback. 5\" Mufflers : Perfect for those looking for a subtle upgrade. The mufflers cancel more of the highs and midrange tones leaving a deep tone that is quieter than most catback exhausts on the market at cruise and idle, but still has a nice bark at wide open throttle. Tips: 4\" In-House TIG Welded Single Wall Tips.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2015-17 Legacy 3.6R Muffler Delete Catback: Aggressive Sound for Your Flat Six\u003c\/li\u003e\n\u003cli\u003eThe sweet sound of your 3.6R flat six at full song is right around the corner. Whether your factory exhaust is ready for a refresh or you're just looking for a more lively driving experience, this bolt-up stainless system designed specifically for your 2015-2017 model year car is a great solution\u003c\/li\u003e\n\u003cli\u003eThe Subaru EZ series engines sound incredible. Every time we fire one up after installing an exhaust it just brings a smile to our face. Lets do the same for you. And what's better than a great sounding exhaust than a great sounding exhaust at full volume. This muffler delete version will turn heads from cold start to warm idle through parking lots and most definitely at full throttle. Featuring industry leading design and manufacturing, our catback exhaust system for the Legacy 3.6R is a direct factory fit to the factory exhaust manifold and catalytic converters. Removing the two very heavy factory mufflers in lieu of lightweight stainless mandrel bent and TIG welded dual straight exhaust results in a significant drop in weight. The midpipe gets upgraded to a 3\" system with a resonated center section and V-band connections throughout for easy installation and longevity. Get the look and sound you want\u003c\/li\u003e\n\u003cli\u003eThe exhaust installs in a snap, just two bolts and five exhaust hanger bushings to remove the factory exhaust. Optionally install the upgraded exhaust with four of our standard urethane exhaust hanger bushings to more firmly hold the upgraded exhaust in place if you plan on any serious driving or off-roading the vehicle substantially. Or, if you just like upgrading things to upgrade them. Your secret is safe with us\u003c\/li\u003e\n\u003cli\u003eChoose a muffled, non-muffled or dual chamber dual exit system to achieve your desired sound level and tone. This configuration features the muffler delete setup\u003c\/li\u003e\n\u003cli\u003eUsing our Ercolina CNC Mandrel Bender, we bend all of the tubing for our exhaust systems in-house, and we take great care to control our bending process for high-flow function and attractive cosmetic appearance. All of the tubing features a #4 brushed finish, including the finish on the hand built exhaust tips\u003c\/li\u003e\n\u003cli\u003e100% T304 Stainless Steel Construction, Precision Fabricated and Fitted Weldment:\u003c\/li\u003e\n\u003cli\u003eAll of our exhaust systems start with superior in-house cutting and forming of all of the core components that go into the construction of our exhausts. And whether it's being painstakingly intolerant with sizing of mating parts to ensure a perfect weld, or taking the extra time to develop Go\/No-Go fixturing and using a CNC press brake to ensure repeatable exhaust hanger positioning, we put in the extra effort so that you get a superior product\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest catback exhaust for 15-19 Legacy?\u003c\/strong\u003e 2015-17 Legacy 3.6R Muffler Delete Catback: Aggressive Sound for Your Flat Six The sweet sound of your 3.6R flat six at full song is right around the corner. Whether your factory exhaust is ready for a refresh or you're just looking for a more lively driving experience, this bolt-up stainless system designed specifically for your 2015-2017 model year car is a great solution. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy catback exhaust made from?\u003c\/strong\u003e The official listing describes T304 Stainless Steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the 15-19 Legacy catback exhaust?\u003c\/strong\u003e Includes a new hardware kit for installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115621085286,"sku":"SUCB15LEG-0MU","price":1317.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/2015-2018_Legacy_3.6R_Catback_Muffler_Delete.flag__37325.1748993723.jpg?v=1794839223"},{"product_id":"nameless-performance-15-19-legacy-catback-exhaust-5-muffler-3","title":"Nameless Performance [15-19 Legacy] Catback Exhaust - 5\" Muffler","description":"\u003cp\u003eLegacy Catback Exhaust: The Sport Exhaust Note You've Been Looking For. Give your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA. This muffled catback is painstakingly fabricated and hand TIG welded from the center resonator through the 5\" ceramic packed muffler and out the 4\" polished stainless single wall exhaust tip out the back. What's better? The midpipe gives you better ground clearance than OEM and fits with the majority of trailer hitches on the market. This configuration is our standard size 5\" muffler for a warm rich sound signature that isn't afraid to bark at wide open throttle. Other configurations available feature our dual chamber drone cancelling design and muffler delete options - check them out on the main '18-19 Subaru Legacy category . Benefits: Improved Ground Clearance: The midpipe in this catback is designed to tuck under the car better than factory for added ground clearance on lowered vehicles or adventures off road. Stainless Construction: No more wondering how many more days your factory resonator will last before it showers your plastic fuel tank with hot exhaust gas. Our parts feature real T304 certified stainless, not the cut rate stuff other brands often substitute. Longevity against the elements just leveled up! Glorious sound: With a warm tone at cruise and a clean interior sound note. Keep your foot light, it's warm and low key. Stomp the throttle, it comes to life. Want something more rowdy or more audible interior exhaust note? We offer those, too. Great Looks: Our hand finished brushed stainless tip is a tailored finishing touch that is easy to maintain and keep clean with scotch brite - easy to maintain - no museum white gloves required and no worries about scratching the polished finish if you want to wipe them off while you're getting gas.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLegacy Catback Exhaust: The Sport Exhaust Note You've Been Looking For\u003c\/li\u003e\n\u003cli\u003eGive your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA. This muffled catback is painstakingly fabricated and hand TIG welded from the center resonator through the 5\" ceramic packed muffler and out the 4\" polished stainless single wall exhaust tip out the back. What's better? The midpipe gives you better ground clearance than OEM and fits with the majority of trailer hitches on the market. This configuration is our standard size 5\" muffler for a warm rich sound signature that isn't afraid to bark at wide open throttle. Other configurations available feature our dual chamber drone cancelling design and muffler delete options - check them out on the main\u003c\/li\u003e\n\u003cli\u003e'18-19 Subaru Legacy category\u003c\/li\u003e\n\u003cli\u003eImproved Ground Clearance:\u003c\/li\u003e\n\u003cli\u003eThe midpipe in this catback is designed to tuck under the car better than factory for added ground clearance on lowered vehicles or adventures off road\u003c\/li\u003e\n\u003cli\u003eNo more wondering how many more days your factory resonator will last before it showers your plastic fuel tank with hot exhaust gas. Our parts feature real T304 certified stainless, not the cut rate stuff other brands often substitute. Longevity against the elements just leveled up!\u003c\/li\u003e\n\u003cli\u003eWith a warm tone at cruise and a clean interior sound note. Keep your foot light, it's warm and low key. Stomp the throttle, it comes to life. Want something more rowdy or more audible interior exhaust note? We offer those, too\u003c\/li\u003e\n\u003cli\u003eOur hand finished brushed stainless tip is a tailored finishing touch that is easy to maintain and keep clean with scotch brite - easy to maintain - no museum white gloves required and no worries about scratching the polished finish if you want to wipe them off while you're getting gas\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest catback exhaust for 15-19 Legacy?\u003c\/strong\u003e Legacy Catback Exhaust: The Sport Exhaust Note You've Been Looking For. Give your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy catback exhaust made from?\u003c\/strong\u003e The official listing describes Give your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat warranty comes with the 15-19 Legacy catback exhaust?\u003c\/strong\u003e Lifetime warranty, as stated by the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrading to Nameless Performance urethane exhaust hanger bushings is recommended. The softer factory rubber bushings can let the exhaust move during hard cornering or on an incline, which may cause noise or let the tips contact the bumper.\u003c\/p\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115627966566,"sku":"SUCB18L25-5MU-40SWS","price":1073.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/SUCB18L25-5MU-40SWS__88767.1761934666.jpg?v=1794839273"},{"product_id":"nameless-performance-15-19-legacy-intake-2","title":"Nameless Performance [15-19 Legacy] Intake","description":"\u003cp\u003eAdd midrange torque and horsepower on your flat six with an intake that is built to last. Sometimes a product is designed to solve one issue, but the benefits go far beyond expectation. In the case of our new factory replacement intake system, we designed to remedy the regular failure of the factory plastic intake tube, and got the result of significant power gains.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdd midrange torque and horsepower on your flat six with an intake that is built to last\u003c\/li\u003e\n\u003cli\u003eSometimes a product is designed to solve one issue, but the benefits go far beyond expectation. In the case of our new factory replacement intake system, we designed to remedy the regular failure of the factory plastic intake tube, and got the result of significant power gains\u003c\/li\u003e\n\u003cli\u003eThe factory intake tube connects the airbox and mass airflow sensor to the throttle body, and in the case of the 3.6R that is achieved with a thermoplastic rotomolded tube that, over time, has a potential to develop cracks in its flexible bellows. A crack in that part results in rough engine idle with compromised driveability and an instant check engine light, not to mention an intake system that is directly ingesting underhood dirt and grime. Nobody wants that. And thermoplastics are always in a state of entropy, especially so in high temperature environments like an engine bay\u003c\/li\u003e\n\u003cli\u003eThe upgrade is here: our system replaces that entire themoplastic intake and flow disrupting silencer assembly with a mandrel bent stainless tube and five layer reinforced high temp silicone couplers. The factory breather tube connection is retained and the breather fitting is made of billet stainless steel and TIG welded in place. The result is a replacement part that has improved function and form\u003c\/li\u003e\n\u003cli\u003eWe didn't intend to spend time bringing this product to the dyno, but after the initial installation on our test car, customer reaction to the improved power was significant. They noticed the difference within the first half mile of leaving the shop, and continued to remark about what a difference the system made in midrange pickup during regular driving. So we put the car back to stock and tossed it on the dyno, then swapped this replacement intake on and ran it again. The gains were significant - with over 15ft lb of torque and horsepower to the wheels at 5200rpm and a significant amount across the entire powerband, averaging 7hp and 8ft lb from take off to redline. That's a noticeable difference - and the design provides an underhood solution that you can buy once and have last the life of your car\u003c\/li\u003e\n\u003cli\u003eOur classic wrinkle red and wrinkle black powdercoating options are back for this new product line. The powdercoat provides enough texture to give a good match for most other red powdercoated parts on the market as well as having the ability to be easily wiped down and kept clean. Looking for a custom color? Just ask for an unfinished brushed stainless option in the notes of your order and you can customize the part in the finish of your choice\u003c\/li\u003e\n\u003cli\u003eDon't let the time honored tradition of a cracked factory intake tube leave you stranded - upgrade before that happens and save yourself a tow, or an even bigger headache in the backcountry\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest intake for 15-19 Legacy?\u003c\/strong\u003e Add midrange torque and horsepower on your flat six with an intake that is built to last. Sometimes a product is designed to solve one issue, but the benefits go far beyond expectation. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy intake made from?\u003c\/strong\u003e The official listing describes mandrel bent stainless tube and five layer reinforced high temp silicone couplers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat warranty comes with the 15-19 Legacy intake?\u003c\/strong\u003e Lifetime warranty, as stated by the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nameless Performance","offers":[{"title":"Wrinkle Black","offer_id":68115629277286,"sku":"IN-TO-1-BLK-F-15LEG36R","price":335.0,"currency_code":"USD","in_stock":true},{"title":"Wrinkle Red","offer_id":68115629310054,"sku":"IN-TO-1-RED-F-15LEG36R","price":335.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/1699040077.1280.1280__56505__27977__76011.1706403232.png?v=1794839283"},{"product_id":"nameless-performance-15-19-legacy-axleback-exhaust-5-muffler-3","title":"Nameless Performance [15-19 Legacy] Axleback Exhaust - 5\" Muffler","description":"\u003cp\u003eDesigned for the 2015-2017 Legacy 3.6R, the Nameless Performance Axleback Exhaust with 5\" Muffler is a direct factory fit to the OEM midpipe at the Y. Removing the two factory 13.5lb mufflers in lieu of a pair of mandrel bent, TIG welded, T304 stainless steel pipes. Factory fit laser cut flanges and 2″ dual piping has equivalent cross sectional area of a 2.85″ straight pipe, providing excellent breathing characteristics for high end horsepower as well as retaining low end torque. Includes a new hardware kit for installation. *Note The 2015-2017 Legacy 3.6R comes equipped with a CVT transmission. Since the CVT keeps the RPMS constant there will be more audible cabin noise than with a standard automatic or a manual transmission vehicle. Muffler Options: Muffler Delete : The loudest option. Removes the mufflers entirely. Has a full range of tone featuring highs, mids, lows. On its own, the muffler delete with a stock midpipe and downpipe is similar to most catback exhausts in terms of sound level. 5\" Mufflers (this product): Perfect for those looking for a subtle upgrade. The mufflers cancel more of the highs and midrange tones leaving a deep tone that is quieter than most catback exhausts on the market at cruise and idle, but still has a nice bark at wide open throttle. Tips: 4\" In-House TIG Welded Single Wall Tips.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for the 2015-2017 Legacy 3.6R, the Nameless Performance Axleback Exhaust with 5\" Muffler is a direct factory fit to the OEM midpipe at the Y. Removing the two factory 13.5lb mufflers in lieu of a pair of mandrel bent, TIG welded, T304 stainless steel pipes\u003c\/li\u003e\n\u003cli\u003eFactory fit laser cut flanges and 2″ dual piping has equivalent cross sectional area of a 2.85″ straight pipe, providing excellent breathing characteristics for high end horsepower as well as retaining low end torque\u003c\/li\u003e\n\u003cli\u003eIncludes a new hardware kit for installation\u003c\/li\u003e\n\u003cli\u003eNote The 2015-2017 Legacy 3.6R comes equipped with a CVT transmission. Since the CVT keeps the RPMS constant there will be more audible cabin noise than with a standard automatic or a manual transmission vehicle\u003c\/li\u003e\n\u003cli\u003eThe loudest option. Removes the mufflers entirely. Has a full range of tone featuring highs, mids, lows. On its own, the muffler delete with a stock midpipe and downpipe is similar to most catback exhausts in terms of sound level\u003c\/li\u003e\n\u003cli\u003e5\" Mufflers (this product):\u003c\/li\u003e\n\u003cli\u003ePerfect for those looking for a subtle upgrade. The mufflers cancel more of the highs and midrange tones leaving a deep tone that is quieter than most catback exhausts on the market at cruise and idle, but still has a nice bark at wide open throttle\u003c\/li\u003e\n\u003cli\u003e4\" In-House TIG Welded Single Wall Tips\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest axleback exhaust for 15-19 Legacy?\u003c\/strong\u003e Designed for the 2015-2017 Legacy 3.6R, the Nameless Performance Axleback Exhaust with 5\" Muffler is a direct factory fit to the OEM midpipe at the Y. Removing the two factory 13.5lb mufflers in lieu of a pair of mandrel bent, TIG welded, T304 stainless steel pipes. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy axleback exhaust made from?\u003c\/strong\u003e The official listing describes T304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the 15-19 Legacy axleback exhaust?\u003c\/strong\u003e Includes a new hardware kit for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrading to Nameless Performance urethane exhaust hanger bushings is recommended. The softer factory rubber bushings can let the exhaust move during hard cornering or on an incline, which may cause noise or let the tips contact the bumper.\u003c\/p\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115635470438,"sku":"SUAB15LEG-5MU","price":634.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/5MU-Axleback__94453__77323__60112.1652992656.1280.1280__71113__59095.1742081584.png?v=1794839330"},{"product_id":"nameless-performance-15-19-legacy-catback-exhaust-5-muffler-4","title":"Nameless Performance [15-19 Legacy] Catback Exhaust - 5\" Muffler","description":"\u003cp\u003eCatback Exhaust: The Sport Exhaust Note You've Been Looking For From Your '15-'17 Legacy. Give your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA. This muffled catback is painstakingly fabricated and hand TIG welded from the center resonator through the 5\" ceramic packed muffler and out the 4\" polished stainless single wall exhaust tip out the back. What's better? The midpipe gives you better ground clearance than OEM and fits with the majority of trailer hitches on the market. This configuration is our standard size 5\" muffler for a warm rich sound signature that isn't afraid to bark at wide open throttle. Other configurations available feature our dual chamber drone cancelling design and muffler delete options - check them out on the main '15-'17 Subaru Legacy category . Benefits: Improved Ground Clearance: The midpipe in this catback is designed to tuck under the car better than factory for added ground clearance on lowered vehicles or adventures off road. Stainless Construction: No more wondering how many more days your factory resonator will last before it showers your plastic fuel tank with hot exhaust gas. Our parts feature real T304 certified stainless, not the cut rate stuff other brands often substitute. Longevity against the elements just leveled up! Glorious sound: With a warm tone at cruise and a clean interior sound note. Keep your foot light, it's warm and low key. Stomp the throttle, it comes to life. Want something more rowdy or more audible interior exhaust note? We offer those, too. Great Looks: Our hand finished brushed stainless tip is a tailored finishing touch that is easy to maintain and keep clean with scotch brite - easy to maintain - no museum white gloves required and no worries about scratching the polished finish if you want to wipe them off while you're getting gas.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCatback Exhaust: The Sport Exhaust Note You've Been Looking For From Your '15-'17 Legacy\u003c\/li\u003e\n\u003cli\u003eGive your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA. This muffled catback is painstakingly fabricated and hand TIG welded from the center resonator through the 5\" ceramic packed muffler and out the 4\" polished stainless single wall exhaust tip out the back. What's better? The midpipe gives you better ground clearance than OEM and fits with the majority of trailer hitches on the market. This configuration is our standard size 5\" muffler for a warm rich sound signature that isn't afraid to bark at wide open throttle. Other configurations available feature our dual chamber drone cancelling design and muffler delete options - check them out on the main\u003c\/li\u003e\n\u003cli\u003e'15-'17 Subaru Legacy category\u003c\/li\u003e\n\u003cli\u003eImproved Ground Clearance:\u003c\/li\u003e\n\u003cli\u003eThe midpipe in this catback is designed to tuck under the car better than factory for added ground clearance on lowered vehicles or adventures off road\u003c\/li\u003e\n\u003cli\u003eNo more wondering how many more days your factory resonator will last before it showers your plastic fuel tank with hot exhaust gas. Our parts feature real T304 certified stainless, not the cut rate stuff other brands often substitute. Longevity against the elements just leveled up!\u003c\/li\u003e\n\u003cli\u003eWith a warm tone at cruise and a clean interior sound note. Keep your foot light, it's warm and low key. Stomp the throttle, it comes to life. Want something more rowdy or more audible interior exhaust note? We offer those, too\u003c\/li\u003e\n\u003cli\u003eOur hand finished brushed stainless tip is a tailored finishing touch that is easy to maintain and keep clean with scotch brite - easy to maintain - no museum white gloves required and no worries about scratching the polished finish if you want to wipe them off while you're getting gas\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest catback exhaust for 15-19 Legacy?\u003c\/strong\u003e Catback Exhaust: The Sport Exhaust Note You've Been Looking For From Your '15-'17 Legacy. Give your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy catback exhaust made from?\u003c\/strong\u003e The official listing describes Give your rusty factory catback a break and swap it out for a TIG welded stainless system that is made entirely in the USA.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat warranty comes with the 15-19 Legacy catback exhaust?\u003c\/strong\u003e Lifetime warranty, as stated by the manufacturer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrading to Nameless Performance urethane exhaust hanger bushings is recommended. The softer factory rubber bushings can let the exhaust move during hard cornering or on an incline, which may cause noise or let the tips contact the bumper.\u003c\/p\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115636224102,"sku":"SUCB15L25-5MU-40SWS","price":1073.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/2015-2019_Subaru_Legacy_2.5_Catback_5in_Muffled__60003.1748989303.png?v=1794839335"},{"product_id":"nameless-performance-15-19-legacy-axleback-exhaust-muffler-delete-3","title":"Nameless Performance [15-19 Legacy] Axleback Exhaust - Muffler Delete","description":"\u003cp\u003eDesigned for the 2018-2019 Subaru Legacy 2.5i with single exit exhaust. Our Nameless Performance Axleback Exhaust system is a simple and direct bolt on to the OEM midpipe. By removing the heavy factory 13.5lb mufflers in exchange for our T304 stainless steel, mandrel bent and tig welded system, you not only get great sound but also some extra grunt. Available in muffled or muffler delete configurations this axleback exhaust will give you the exact sound and look you want! Featuring factory fit laser cut flanges and 2″ piping that is larger than the diameter of the factory midpipe, this system flows! Providing excellent breathing characteristics for high end horsepower as well as retaining low end torque. Fits 2018-2019 Legacy 2.5i Sedan, and includes a new hardware kit for installation. Factory exhaust trim ring must be removed (two bolts) in order to fit upgraded exhaust. Muffler Configuration: Muffler Delete: The loudest option. Removes the mufflers entirely. Has a full range of tone featuring highs, mids, lows. On its own, the muffler delete with a stock midpipe and downpipe is similar to most catback exhausts in terms of sound level. Tip: 3.5\" In-House TIG Welded Single Wall Tips.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for the 2018-2019 Subaru Legacy 2.5i with single exit exhaust. Our Nameless Performance Axleback Exhaust system is a simple and direct bolt on to the OEM midpipe. By removing the heavy factory 13.5lb mufflers in exchange for our T304 stainless steel, mandrel bent and tig welded system, you not only get great sound but also some extra grunt. Available in muffled or muffler delete configurations this axleback exhaust will give you the exact sound and look you want!\u003c\/li\u003e\n\u003cli\u003eFeaturing factory fit laser cut flanges and 2″ piping that is larger than the diameter of the factory midpipe, this system flows! Providing excellent breathing characteristics for high end horsepower as well as retaining low end torque\u003c\/li\u003e\n\u003cli\u003eFits 2018-2019 Legacy 2.5i Sedan, and\u003c\/li\u003e\n\u003cli\u003eincludes a new hardware kit\u003c\/li\u003e\n\u003cli\u003efor installation. Factory exhaust trim ring must be removed (two bolts) in order to fit upgraded exhaust\u003c\/li\u003e\n\u003cli\u003eThe loudest option. Removes the mufflers entirely. Has a full range of tone featuring highs, mids, lows. On its own, the muffler delete with a stock midpipe and downpipe is similar to most catback exhausts in terms of sound level\u003c\/li\u003e\n\u003cli\u003e3.5\" In-House TIG Welded Single Wall Tips\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest axleback exhaust for 15-19 Legacy?\u003c\/strong\u003e Designed for the 2018-2019 Subaru Legacy 2.5i with single exit exhaust. Our Nameless Performance Axleback Exhaust system is a simple and direct bolt on to the OEM midpipe. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy axleback exhaust made from?\u003c\/strong\u003e The official listing describes T304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the 15-19 Legacy axleback exhaust?\u003c\/strong\u003e Fits 2018-2019 Legacy 2.5i Sedan, and includes a new hardware kit for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrading to Nameless Performance urethane exhaust hanger bushings is recommended. The softer factory rubber bushings can let the exhaust move during hard cornering or on an incline, which may cause noise or let the tips contact the bumper.\u003c\/p\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115639238758,"sku":"SUAB18L25-0MU-40SWS","price":294.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/18_Leg-2.5i-0MU__86166__34063__96199.1652992693.1280.1280__57403__17837.1761932483.png?v=1794839374"},{"product_id":"nameless-performance-15-19-legacy-catback-exhaust-muffler-delete-4","title":"Nameless Performance [15-19 Legacy] Catback Exhaust - Muffler Delete","description":"\u003cp\u003e2018-19 Legacy 3.6R Muffler Delete Catback: Aggressive Sound for Your Flat Six The sweet sound of your 3.6R flat six at full song is right around the corner. Whether your factory exhaust is ready for a refresh or you're just looking for a more lively driving experience, this bolt-up stainless system designed specifically for your 2018-2019 model year car is a great solution. The Subaru EZ series engines sound incredible. Every time we fire one up after installing an exhaust it just brings a smile to our face. Lets do the same for you. And what's better than a great sounding exhaust than a great sounding exhaust at full volume. This muffler delete version will turn heads from cold start to warm idle through parking lots and most definitely at full throttle. Featuring industry leading design and manufacturing, our catback exhaust system for the Legacy 3.6R is a direct factory fit to the factory exhaust manifold and catatlytic converters. Removing the two very heavy factory mufflers in lieu of lightweight stainless mandrel bent and TIG welded dual straight exhuast results in a signifcant drop in weight. The midpipe gets upgraded to a 3\" system with a resonated center section and v-band connections throughout for easy installation and longevity. Get the look and sound you want. The exhaust installs in a snap, just two bolts and five exhaust hanger bushings to remove the factory exhaust. Optionally install the upgraded exhaust with four of our standard urethane exhaust hanger bushings to more firmly hold the upgraded exhaust in place if you plan on any serious driving or off-roading the vehicle substantially. Or, if you just like upgrading things to upgrade them.Your secret is safe with us. Design Specifications: Configurable: Choose a muffled, non-muffled or dual chamber dual exit system to achieve your desired sound level and tone. This configuration features the muffler delete setup. CNC Mandrel Bent Tubing: Using our Ercolina CNC Mandrel Bender, we bend all of the tubing for our exhaust systems in-house, and we take great care to control our bending process for high-flow function and attractive cosmetic appearance. All of the tubing features a #4 brushed finish, including the finish on the hand built exhaust tips. 100% T304 Stainless Steel Construction, Precision Fabricated and Fitted Weldment: All of our exhaust systems start with superior in-house cutting and forming of all of the core components that go into the construction of our exhausts. And whether it's being painstakingly intolerant with sizing of mating parts to ensure a perfect weld, or taking the extra time to develop Go\/No-Go fixturing and using a CNC press brake to ensure repeatable exhaust hanger positioning, we put in the extra effort so that you get a superior product. Hand TiG Welded: A huge portion of what makes our exhaust systems the quality and look that our customers expect is that all of our systems are hand TIG welded rather than auto-TIG welded like much of our overseas competition. Our exhausts are welded by hand, by a human operator who has control over all of the variables of the welding process to achieve a superior weld form. Superior Muffler Design: Muffler delete is the superior muffler. Solid Hanger Bars: Our T304 Exhaust Hanger Bars integrated into all of our exhaust systems are made from solid bar stock, ensuring that your exhaust fits out of the box and stays where you left it. They are CNC formed for a perfect fit. This is another area where we differ from the competition. Most commercially available exhaust hangers are tubular and 400 series ferric stainless prone to excessive surface rust. Great Look: Upgrade your factory plastic trim rings to our stainless single wall polished and TIG welded exhaust tips for an improved look to go with the improved sound of your exhaust. Fits 2018-2019 Legacy 3.6R. While some customers have managed to equip this dual exit system to the 2.5l models, it is designed for the 3.6l engines with a larger than stock 3\" midpipe which isn't best suited to the 2.5l engines. If you have a 2015, 2016 or 2017 model, be sure to check out the equivalent product for your year range that fits with your specific bumper. There was a facelift at the 2018 model year and tip locations changed so the two ranges are not compatible. Includes a new hardware kit for installation. Muffler Configuration: Muffler Delete: Say Howdy Get Rowdy, this system sounds amazing, but might get on your nerves a bit on longer drives and while you're under load at static RPM, but that'll be made up for by how great it sounds when you're driving the car at full song. If this is the exhaust for you, you'll likely know it in advance. If you're on the fence, definitely check out the muffled and dual chamber options we have for the Legacy 3.6R Catback. Recommended Add-Ons: Exhaust Hanger Bushings Upgrading to our long lasting Nameless Performance urethane exhaust bushings from the factory rubber bushings is highly recommended. The softer rubber factory bushings are overly flexible and if you race your car or spend time at an incline off-road, the exhaust can \"wag\" left to right which sometimes causes noise or the tips to touch the rear bumper. When this happens there is a chance your bumper can be damaged or if you have a hitch or any other accessories can cause annoying sounds. The best way to avoid this is to use our urethane exhaust bushings to hold the exhaust in place. These upgraded bushings are not necessary to install our exhaust systems but for the small cost of upgraded units, it is an excellent idea! Add 1 Bushing to your cart : Upgrade the one bushing on the midpipe portion of the exhaust. Add 4 Bushings to your cart : Upgrade all 4 rubber bushings on the axleback portion of the exhaust. Add 5 Bushings to your cart : Upgrade all 5 of the factory rubber bushings from the midpipe back. Exhaust Hanger Bushing Removal Tool This tool makes removing the hanger bushings a breeze. We highly recommend this tool , it turns the removal process from frustrating to satisfying. Easily remove hanger bushings High Quality Steel Construction Add an Exhaust Hanger Bushing Removal Tool to your cart (US Shipping) Add an Exhaust Hanger Bushing Removal Tool to your cart (International Shipping).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2018-19 Legacy 3.6R Muffler Delete Catback: Aggressive Sound for Your Flat Six\u003c\/li\u003e\n\u003cli\u003eThe sweet sound of your 3.6R flat six at full song is right around the corner. Whether your factory exhaust is ready for a refresh or you're just looking for a more lively driving experience, this bolt-up stainless system designed specifically for your 2018-2019 model year car is a great solution\u003c\/li\u003e\n\u003cli\u003eThe Subaru EZ series engines sound incredible. Every time we fire one up after installing an exhaust it just brings a smile to our face. Lets do the same for you. And what's better than a great sounding exhaust than a great sounding exhaust at full volume. This muffler delete version will turn heads from cold start to warm idle through parking lots and most definitely at full throttle. Featuring industry leading design and manufacturing, our catback exhaust system for the Legacy 3.6R is a direct factory fit to the factory exhaust manifold and catatlytic converters. Removing the two very heavy factory mufflers in lieu of lightweight stainless mandrel bent and TIG welded dual straight exhuast results in a signifcant drop in weight. The midpipe gets upgraded to a 3\" system with a resonated center section and v-band connections throughout for easy installation and longevity. Get the look and sound you want\u003c\/li\u003e\n\u003cli\u003eThe exhaust installs in a snap, just two bolts and five exhaust hanger bushings to remove the factory exhaust. Optionally install the upgraded exhaust with four of our standard urethane exhaust hanger bushings to more firmly hold the upgraded exhaust in place if you plan on any serious driving or off-roading the vehicle substantially. Or, if you just like upgrading things to upgrade them.Your secret is safe with us\u003c\/li\u003e\n\u003cli\u003eChoose a muffled, non-muffled or dual chamber dual exit system to achieve your desired sound level and tone. This configuration features the muffler delete setup\u003c\/li\u003e\n\u003cli\u003eUsing our Ercolina CNC Mandrel Bender, we bend all of the tubing for our exhaust systems in-house, and we take great care to control our bending process for high-flow function and attractive cosmetic appearance. All of the tubing features a #4 brushed finish, including the finish on the hand built exhaust tips\u003c\/li\u003e\n\u003cli\u003e100% T304 Stainless Steel Construction, Precision Fabricated and Fitted Weldment:\u003c\/li\u003e\n\u003cli\u003eAll of our exhaust systems start with superior in-house cutting and forming of all of the core components that go into the construction of our exhausts. And whether it's being painstakingly intolerant with sizing of mating parts to ensure a perfect weld, or taking the extra time to develop Go\/No-Go fixturing and using a CNC press brake to ensure repeatable exhaust hanger positioning, we put in the extra effort so that you get a superior product\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest catback exhaust for 15-19 Legacy?\u003c\/strong\u003e 2018-19 Legacy 3.6R Muffler Delete Catback: Aggressive Sound for Your Flat Six The sweet sound of your 3.6R flat six at full song is right around the corner. Whether your factory exhaust is ready for a refresh or you're just looking for a more lively driving experience, this bolt-up stainless system designed specifically for your 2018-2019 model year car is a great solution. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy catback exhaust made from?\u003c\/strong\u003e The official listing describes T304 Stainless Steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the 15-19 Legacy catback exhaust?\u003c\/strong\u003e Includes a new hardware kit for installation.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115702218854,"sku":"SUCB18LEG-0MU","price":1322.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/2015-2018_Legacy_3.6R_Catback_Muffler_Delete.flag__55505.1748978701.jpg?v=1794839516"},{"product_id":"nameless-performance-15-19-legacy-midpipe-3","title":"Nameless Performance [15-19 Legacy] Midpipe (3\")","description":"\u003cp\u003eNEW from Nameless Performance, Inc. is our 2015-2019 Subaru Legacy 3.6R upgraded midpipe. Let that awesome Subaru 3.6R engine breathe and you will be rewarded with great sound and better performance characteristics! Made from 3\" T304 Stainless Steel, our midpipe is designed to work with both factory downpipes and factory axleback exhausts, in addition to our parts. This 3\" section also includes a 3\" resonator to help reduce exhaust drone. Our midpipe does not neck down to a restrictive 2.5\" like some of the competition, and we supply all necessary hardware to make installation quick and easy. The included 'Y' pipe splits to dual 2.25\" circuits with a mandrel bends throughout for a smooth exhaust flow. You will not find any crush bends here. This part is compatible with 15-19 Subaru Legacy models that utilize the 3.6R Engine. Built entirely in our shop in Woodland, Washington, the Nameless Performance Subaru Legacy 3.6R Midpipe features superior quality TIG welded, American Sourced T304 stainless tubing throughout. Comes will all necessary hardware and gaskets for the installation. Installation Instructions: Installation Guide - Axleback\/Catback\/Midpipe.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNEW from Nameless Performance, Inc. is our 2015-2019 Subaru Legacy 3.6R upgraded midpipe. Let that awesome Subaru 3.6R engine breathe and you will be rewarded with great sound and better performance characteristics!\u003c\/li\u003e\n\u003cli\u003eMade from 3\" T304 Stainless Steel, our midpipe is designed to work with both factory downpipes and factory axleback exhausts, in addition to our parts. This 3\" section also includes a 3\" resonator to help reduce exhaust drone. Our midpipe does not neck down to a restrictive 2.5\" like some of the competition, and we supply all necessary hardware to make installation quick and easy\u003c\/li\u003e\n\u003cli\u003eThe included 'Y' pipe splits to dual 2.25\" circuits with a mandrel bends throughout for a smooth exhaust flow. You will not find any crush bends here\u003c\/li\u003e\n\u003cli\u003eThis part is compatible with 15-19 Subaru Legacy models that utilize the 3.6R Engine\u003c\/li\u003e\n\u003cli\u003eBuilt entirely in our shop in Woodland, Washington, the Nameless Performance Subaru Legacy 3.6R Midpipe features superior quality TIG welded, American Sourced T304 stainless tubing throughout\u003c\/li\u003e\n\u003cli\u003eComes will all necessary hardware and gaskets for the installation\u003c\/li\u003e\n\u003cli\u003eInstallation Instructions:\u003c\/li\u003e\n\u003cli\u003eInstallation Guide - Axleback\/Catback\/Midpipe\u003c\/li\u003e\n\u003cli\u003eFits: 2015-2019 Legacy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBest midpipe for 15-19 Legacy?\u003c\/strong\u003e NEW from Nameless Performance, Inc. is our 2015-2019 Subaru Legacy 3.6R upgraded midpipe. Let that awesome Subaru 3.6R engine breathe and you will be rewarded with great sound and better performance characteristics!. Fits 2015-2019 Legacy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is the 15-19 Legacy midpipe made from?\u003c\/strong\u003e The official listing describes American Sourced T304 stainless tubing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included with the 15-19 Legacy midpipe?\u003c\/strong\u003e This 3\" section also includes a 3\" resonator to help reduce exhaust drone.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUpgrading to Nameless Performance urethane exhaust hanger bushings is recommended. The softer factory rubber bushings can let the exhaust move during hard cornering or on an incline, which may cause noise or let the tips contact the bumper.\u003c\/p\u003e","brand":"Nameless Performance","offers":[{"title":"Default Title","offer_id":68115713359974,"sku":"SUMP15LEG36R","price":893.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/Nameless-Performance-OBXT-Midpipe-2020__19746__47023__81223__86434__11910.1748976627.png?v=1794839640"}],"url":"https:\/\/jdmuscleusa.com\/collections\/2015-2019-subaru-legacy-engine.oembed","provider":"JDMuscle","version":"1.0","type":"link"}