{"title":"2008-2015 Mitsubishi EVO X Engine Builds","description":"\u003cp\u003eShop engine builds for the 2008-2015 Mitsubishi EVO X. These parts are selected for 2008-2015 EVO X fitment, from daily upgrades to more focused build parts. Continue with the engine collection or the related EVO X collections below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShop related\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2008-2015-mitsubishi-evo-x\"\u003e08-15 EVO X\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2008-2015-mitsubishi-evo-x-engine\"\u003e08-15 EVO X Engine\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2008-2015-mitsubishi-evo-x-exhausts\"\u003e08-15 EVO X Exhausts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2008-2015-mitsubishi-evo-x-fuel-system\"\u003e08-15 EVO X Fuel System\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2008-2015-mitsubishi-evo-x-cooling\"\u003e08-15 EVO X Cooling\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2008-2015-mitsubishi-evo-x-air-induction\"\u003e08-15 EVO X Air Induction\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2008-2015-mitsubishi-evo-x-engine-dressing\"\u003e08-15 EVO X Engine Dressing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2008-2015-mitsubishi-evo-x-pistons-and-sleeves\"\u003e08-15 EVO X Pistons and Sleeves\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2008-2015-mitsubishi-evo-x-rods\"\u003e08-15 EVO X Rods\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"arp-head-studs-mitsubishi-evo-x-2008-2015","title":"ARP Head Studs Mitsubishi EVO X 2008-2015 | 207-4206","description":"\u003cp\u003eObtaining the optimum cylinder head-to-block sealing is especially critical in small displacement engines employing high compression pistons or power adders like turbochargers, nitrous oxide and superchargers. That's why ARP? head studs are popular among leading Sport Compact\/Import racers.\u003cbr\u003e\u003cbr\u003eYou should know that ARP? uses a premium grade 8740 alloy that is rated far superior to \"aircraft\" quality. Then, each stud is precisely heat-treated to 200,000 psi. Following heattreat, each stud is centerless ground to make it as close to perfectly concentric as possible. This procedure involves about ten very slight cuts and results in an exceptionally straight part. It's important to note that lesser quality studs are not even centerless ground_the material is thread rolled in bar stock form (mostly before heat-treat, when the material is easier to machine). Because ARP? studs are manufactured to such exacting tolerances, you will note that gaskets and cylinder heads literally glide into position and are perfectly aligned_something that won't happen with inferior quality head studs.\u003cbr\u003e\u003cbr\u003eARP? studs are thread rolled after heat-treat, which gives them about 1000% (that's ten times) better fatigue strength than those studs that are threaded prior to heat-treat.\u003cbr\u003e\u003cbr\u003ePart #: 207-4206\u003c\/p\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":31094870933606,"sku":"arp207-4206","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/arp-head-studs-mitsubishi-evo-x-2008-2015-207-4206-performance-hardware-arp-arp207-4206.jpg?v=1614511333"},{"product_id":"arp-main-stud-kit-mitsubishi-evo-x-2008-2015","title":"ARP Main Stud Kit Mitsubishi EVO X 2008-2015 | 207-5403","description":"ARP has just released a new Pro Series ARP2000 main stud kit for 2008 and later Mitsubishi 2..0L (4B11) Turbo and Non Turbo applications. \u003cbr\u003e\u003cbr\u003eIncludes a set of ten, M10 ARP2000 main studs, a set of ten, M8 ARP2000 main studs, twenty 8740 chrome moly steel 12 pt nuts and a 1\/2 oz. pack of ARP Ultra-Torque fastener assembly lubricant. \u003cbr\u003e\u003cbr\u003eAll Pro Series ARP2000 studs are centerless ground, heat treated prior to thread rolling and machining, and are nominally rated at 220,000 psi. These fasteners deliver a 50% increase in tensile strength over the OEM main bolts.\u003cbr\u003e\u003cbr\u003ePart No. 207-5403","brand":"ARP","offers":[{"title":"Default Title","offer_id":31094871392358,"sku":"arp207-5403","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/arp-main-stud-kit-mitsubishi-evo-x-2008-2015-207-5403-performance-hardware-arp-arp207-5403.jpg?v=1614511340"},{"product_id":"arp-connecting-rod-bolts-mitsubishi-evo-x-2008-2015","title":"ARP Connecting Rod Bolts Mitsubishi EVO X 2008-2015 | 207-6002","description":"\u003cp\u003eARP manufactures replacement rod bolts for many popular import and domestic Sport Compact engines that are made of premium grade 8740 chrome moly steel and heat treated to a nominal tensile strength of 200,000 psi. Threads are rolled after heat treat to ensure optimum fatigue strength. They are far superior to OEM fasteners in terms of durability and service life fully capable of handling the extra stress of high combustion pressure engines. For extreme applications, rod bolts made of special ARP 2000 material (rated at a 220,000 psi nominal tensile strength) are available, including those with the patented Wave-Loc design. Special high strength bolts also available for aftermarket connecting rods. \u003cbr\u003e\u003cbr\u003ePart #: 207-6002\u003c\/p\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":31094871425126,"sku":"arp207-6002","price":117.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/arp-connecting-rod-bolts-mitsubishi-evo-x-2008-2015-207-6002-performance-hardware-arp-arp207-6002.jpg?v=1614511341"},{"product_id":"torque-solution-billet-mivec-exhaust-cam-gear-housing-mitsubishi-evo-x-2008-2015","title":"Torque Solution [08-15 EVO X] Billet Mivec Exhaust Cam Gear Housing","description":"\u003cp\u003eThe Torque Solution Billet Mivec Exhaust Cam Gear Housing is a billet Mivec exhaust cam gear housing for the 2008-2015 Mitsubishi EVO X. The housing is made from 6061 T6 CNC billet aluminum, is stronger and has a larger outer diameter than the OEM cast housing, and prevents the OEM cast cam gear housing failure that can occur with upgraded valve springs and the extra spring pressure they create.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: TS-EX-456\u003c\/li\u003e\n\u003cli\u003eMaterial: 6061 T6 CNC Billet Aluminum\u003c\/li\u003e\n\u003cli\u003eBlack Anodized with Torque Solution Engraved Logo\u003c\/li\u003e\n\u003cli\u003eStronger and larger outer diameter than the OEM housing\u003c\/li\u003e\n\u003cli\u003eLimited Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eTo install, the factory phaser, gear, hardware, spring and retaining pin must be transferred from the OEM cast cam gear\u003c\/li\u003e\n\u003cli\u003eVehicle Fitment: 2008-2015 Mitsubishi EVO X\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWill this cam gear housing fit my car?\u003c\/strong\u003e This billet Mivec exhaust cam gear housing fits the 2008-2015 Mitsubishi EVO X.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The box includes the Torque Solution Billet Mivec Exhaust Cam Gear Housing in 6061 T6 CNC billet aluminum with a black anodized finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat else is needed to install this housing?\u003c\/strong\u003e The manufacturer states the factory phaser, gear, hardware, spring and retaining pin must be transferred from the OEM cast cam gear to install this housing.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Torque Solution","offers":[{"title":"Default Title","offer_id":31117502382182,"sku":"tqsTS-EX-456","price":148.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/torque-solution-billet-mivec-exhaust-cam-gear-housing-mitsubishi-evo-x-2008-2015-cams-torque-solution-tqsts-ex-456.jpg?v=1614518978"},{"product_id":"brian-crower-connecting-rods-sportsman-w-arp2000-fasteners-mitsubishi-evo-x","title":"Brian Crower [08-15 EVO X] Connecting Rods Sportsman w\/ ARP2000 Fasteners - Mitsubishi 4B11","description":"\u003cp\u003eThe Brian Crower connecting rods are Sportsman (ProH2K) H-beam connecting rods with ARP2000 fasteners for the Mitsubishi 4B11 engine in the 2008-2015 Mitsubishi EVO X. Brian Crower rods for the 4B11 engine are made from 4340 billet steel and are designed for high horsepower forced induction and high-revving naturally aspirated engines.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: BC6135\u003c\/li\u003e\n\u003cli\u003eEngine: Mitsubishi 4B11\u003c\/li\u003e\n\u003cli\u003eCenter-to-Center Length: 5.659\"\u003c\/li\u003e\n\u003cli\u003eFasteners: ARP2000\u003c\/li\u003e\n\u003cli\u003eManufactured in state-of-the-art CNC machining centers, Brian Crower rods are a high-precision choice for your Evo X.\u003c\/li\u003e\n\u003cli\u003eThese are full sets of four (4) rods including aluminum bronze bushings.\u003c\/li\u003e\n\u003cli\u003eNote: Brian Crower rods are sold in sets of four.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my EVO X?\u003c\/strong\u003e Yes, if your car is a 2008-2015 Mitsubishi EVO X with a 4B11 engine. Confirm your piston and crankshaft combination with your engine builder before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The box contains a full set of four (4) Brian Crower BC6135 connecting rods including aluminum bronze bushings and ARP2000 fasteners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs professional installation required?\u003c\/strong\u003e Yes. This is an internal engine component and installation requires engine disassembly and professional machining and assembly by a qualified engine builder.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Brian Crower","offers":[{"title":"Default Title","offer_id":31125794750566,"sku":"BC6135","price":657.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/brian-crower-connecting-rods-sportsman-warp2000-fasteners-mitsubishi-evo-x-rods-brian-crower-bc6135.jpg?v=1614520723"},{"product_id":"brian-crower-connecting-rods-bc625-w-arp-custom-age-625-mitsubishi-evo-x","title":"Brian Crower [08-15 EVO X] Connecting Rods - BC625+ with ARP Custom Age 625+","description":"\u003cp\u003eBrian Crower connecting rods for the Mitsubishi EVO X 4B11 engine are made from 4340 billet steel and are designed for high horsepower forced induction and high-revving naturally aspirated engines.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: BC6134\u003c\/li\u003e\n\u003cli\u003eFitment: Mitsubishi EVO X with the 4B11 engine (2008-2015)\u003c\/li\u003e\n\u003cli\u003eBC625+ connecting rods with ARP Custom Age 625+ fasteners\u003c\/li\u003e\n\u003cli\u003eMade from 4340 billet steel, manufactured in CNC machining centers\u003c\/li\u003e\n\u003cli\u003eFull set of four (4) rods, including aluminum bronze bushings\u003c\/li\u003e\n\u003cli\u003eBrian Crower rods are sold in sets of four\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQ\u0026amp;A\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: This rod set fits the 2008-2015 Mitsubishi EVO X with the 4B11 engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The box contains a full set of four connecting rods with aluminum bronze bushings and ARP Custom Age 625+ fasteners.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: How is this installed?\u003c\/strong\u003e\u003cbr\u003eA: These rods are installed during a professional engine build. Brian Crower rods are sold in sets of four.\u003c\/p\u003e","brand":"Brian Crower","offers":[{"title":"Default Title","offer_id":31125796094054,"sku":"BC6134","price":980.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/brian-crower-connecting-rods-bc625-warp-custom-age-625-mitsubishi-evo-x-rods-brian-crower-bc6134.jpg?v=1614520728"},{"product_id":"brian-crower-connecting-rods-mitsubishi-evolution-x","title":"Brian Crower Connecting Rods Mitsubishi Evolution X","description":"\u003cp\u003eThe Brian Crower connecting rods for the Mitsubishi Evolution X are made from 4340 billet steel and are designed for high horsepower forced induction and high-revving naturally aspirated engines. Manufactured in state-of-the-art CNC machining centers, these are full sets of four (4) rods including aluminum bronze bushings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: BC6134, BC6137\u003c\/li\u003e\n\u003cli\u003eFitment: Mitsubishi Evolution X 2008-2010, as listed\u003c\/li\u003e\n\u003cli\u003e4340 billet steel connecting rods\u003c\/li\u003e\n\u003cli\u003eFull set of four (4) rods including aluminum bronze bushings\u003c\/li\u003e\n\u003cli\u003eBC6134: BC625+ rods with ARP625+ fasteners\u003c\/li\u003e\n\u003cli\u003eBC6137: bRods with ARP2000 fasteners\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQ\u0026amp;A\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: These connecting rods are listed for the Mitsubishi Evolution X 2008-2010. Confirm your vehicle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: A full set of four (4) Brian Crower connecting rods including aluminum bronze bushings, with the fastener type for the selected variant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: How is this installed?\u003c\/strong\u003e\u003cbr\u003eA: Connecting rods are installed inside the engine during a professional engine build or rebuild.\u003c\/p\u003e","brand":"Brian Crower","offers":[{"title":"BC625+ Rods w\/ ARP625+ Fasteners","offer_id":31125805891686,"sku":"BC6134","price":980.7,"currency_code":"USD","in_stock":true},{"title":"bRods w\/ ARP2000 Fasteners","offer_id":31125805924454,"sku":"BC6137","price":1045.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/brian-crower-connecting-rods-mitsubishi-evolution-x-rods-brian-crower-bc625-rods-w-arp625-fasteners-bc6134.jpg?v=1614520841"},{"product_id":"brian-crower-intake-valves-mitsubishi-evolution-x","title":"Brian Crower Intake Valves Mitsubishi Evolution X","description":"\u003cp\u003eThe Brian Crower intake valves for the Mitsubishi Evolution X are made from premium stainless steel, fully machined and swirl polished for ultimate air flow. They feature a dished head for added weight savings and increased valve control at high rpm, and are available in both a standard and oversize head.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: BC3130, BC3134\u003c\/li\u003e\n\u003cli\u003eFitment: Mitsubishi Evolution X 2008-2010, as listed\u003c\/li\u003e\n\u003cli\u003ePremium stainless steel, fully machined and swirl polished\u003c\/li\u003e\n\u003cli\u003eDished head for added weight savings\u003c\/li\u003e\n\u003cli\u003eBC3130: 34mm intake valves (OEM size)\u003c\/li\u003e\n\u003cli\u003eBC3134: 35.0mm intake valves (1.0mm OS)\u003c\/li\u003e\n\u003cli\u003eSold in sets of 8\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQ\u0026amp;A\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: These intake valves are listed for the Mitsubishi Evolution X 2008-2010. Confirm your vehicle and required valve size before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: Brian Crower intake valves are sold in sets of 8 in the selected size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: How is this installed?\u003c\/strong\u003e\u003cbr\u003eA: Valves are installed in the cylinder head during a professional cylinder head build or rebuild.\u003c\/p\u003e","brand":"Brian Crower","offers":[{"title":"34mm Intake Valves (OEM Size)","offer_id":31125805989990,"sku":"BC3130","price":197.0,"currency_code":"USD","in_stock":true},{"title":"35.0mm Intake Valves (1.0mm OS)","offer_id":31125806022758,"sku":"BC3134","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/brian-crower-intake-valves-mitsubishi-evolution-x-valves-brian-crower-34mm-intake-valves-oem-size-bc3130.jpg?v=1614520842"},{"product_id":"brian-crower-spring-retainer-kit-mitsubishi-evo-x","title":"Brian Crower Spring \u0026 Retainer Kit Mitsubishi EVO X","description":"\u003cp\u003eThe Brian Crower BC0130 spring and retainer kit for the Mitsubishi Evolution X is designed for high rpm. The single valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. The titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: BC0130\u003c\/li\u003e\n\u003cli\u003eFitment: Mitsubishi Evolution X, as listed\u003c\/li\u003e\n\u003cli\u003eSingle valve springs in chrome silicone alloy\u003c\/li\u003e\n\u003cli\u003eProprietary processing procedures for consistent pressures\u003c\/li\u003e\n\u003cli\u003eTitanium retainers CNC machined from 6AL4V round bar titanium to exacting tolerances\u003c\/li\u003e\n\u003cli\u003eRecommended when upgrading cams\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQ\u0026amp;A\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: This spring and retainer kit is listed for the Mitsubishi Evolution X. Confirm your vehicle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The product is the Brian Crower single valve spring and titanium retainer kit for part number BC0130.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: How is this installed?\u003c\/strong\u003e\u003cbr\u003eA: Valve springs and retainers are installed in the cylinder head during a professional cylinder head build or rebuild.\u003c\/p\u003e","brand":"Brian Crower","offers":[{"title":"Default Title","offer_id":31125806055526,"sku":"BC0130","price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/brian-crower-spring-retainer-kit-mitsubishi-evo-x-valve-springs-and-retainers-brian-crower-bc0130.jpg?v=1614520843"},{"product_id":"brian-crower-stage-3-280-cams-mitsubishi-evo-x","title":"Brian Crower Stage 3 280 Cams Mitsubishi EVO X","description":"\u003cp\u003eThe Brian Crower BC0132 Stage 3 280 camshafts for the Mitsubishi Evolution X are ground on state-of-the-art CNC cam grinders to ensure accuracy and tolerances to within .02mm, and every profile has been prototyped and dyno tested prior to being produced. The 280 degree cams have a longer duration profile and added RPM potential, intended for fully built engines, with tuning and ECU mods recommended.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: BC0132\u003c\/li\u003e\n\u003cli\u003eFitment: Mitsubishi Evolution X, as listed\u003c\/li\u003e\n\u003cli\u003eStage 3 280 camshafts\u003c\/li\u003e\n\u003cli\u003eChecked on an Adcole Camshaft Measuring System\u003c\/li\u003e\n\u003cli\u003eDue to the high lift of these camshafts, you must check retainer to valve guide clearance\u003c\/li\u003e\n\u003cli\u003eThe BC valvetrain kit is required for engine longevity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQ\u0026amp;A\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: These Stage 3 280 camshafts are listed for the Mitsubishi Evolution X. Confirm your vehicle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The product is the Brian Crower Stage 3 280 camshaft set for part number BC0132.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: How is this installed?\u003c\/strong\u003e\u003cbr\u003eA: Camshafts are installed in the cylinder head during a professional engine build; tuning and ECU modifications are recommended and retainer to valve guide clearance must be checked.\u003c\/p\u003e","brand":"Brian Crower","offers":[{"title":"Default Title","offer_id":31125806121062,"sku":"BC0132","price":625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/brian-crower-stage-3-280-cams-mitsubishi-evo-x-camshafts-and-gears-brian-crower-bc0132.jpg?v=1614520844"},{"product_id":"brian-crower-stage-2-272-cams-mitsubishi-evo-x","title":"Brian Crower Stage 2 272 Cams Mitsubishi EVO X","description":"\u003cp\u003eThe Brian Crower BC0131 Stage 2 272 camshafts for the Mitsubishi Evolution X are ground on state-of-the-art CNC cam grinders to ensure accuracy and tolerances to within .02mm, and every profile has been prototyped and dyno tested prior to being produced. The 272 degree cams have a short duration for nice street manners and a slight lope at idle, and can be used with stock valve springs and retainers, though the Brian Crower kit is recommended.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: BC0131\u003c\/li\u003e\n\u003cli\u003eFitment: Mitsubishi Evolution X, as listed\u003c\/li\u003e\n\u003cli\u003eDuration @ .050: 234\/223\u003c\/li\u003e\n\u003cli\u003eLift (in): 11.30\/10.64, as listed in the stored specifications\u003c\/li\u003e\n\u003cli\u003eChecked on an Adcole Camshaft Measuring System\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQ\u0026amp;A\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my vehicle?\u003c\/strong\u003e\u003cbr\u003eA: These Stage 2 272 camshafts are listed for the Mitsubishi Evolution X. Confirm your vehicle before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The product is the Brian Crower Stage 2 272 camshaft set for part number BC0131.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: How is this installed?\u003c\/strong\u003e\u003cbr\u003eA: Camshafts are installed in the cylinder head during a professional engine build; these cams can be used with stock valve springs and retainers, though the Brian Crower kit is recommended.\u003c\/p\u003e","brand":"Brian Crower","offers":[{"title":"Default Title","offer_id":31125806153830,"sku":"BC0131","price":625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/brian-crower-stage-2-272-cams-mitsubishi-evo-x-camshafts-and-gears-brian-crower-bc0131.jpg?v=1614520845"},{"product_id":"cp-pistons-rings-87mm-bore-1-0mm-over-for-evo-x","title":"CP Pistons \u0026 Rings 87mm Bore 1.0mm Over for EVO X","description":"From Drag to Endurance CP pistons have proven their quality in the racing community. These pistons for the 08-10 Evo X are avialable in 86mm stock bore, 86.5mm w\/ 0.5 overbore, or 87.0mm w\/ 1.0mm overbore and retain a 9.0 compression ratio. These pistons are designed for high horsepower applications and are much stronger then OEM due to the forging process CP uses. The CP pistons for the Evo X 4B11 are an excellent choice for your engine build.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNotes:\u003c\/b\u003e\u003cul\u003e    \u003cli\u003e  High strength aluminum forging    \u003c\/li\u003e\n\u003cli\u003e  Lightweight design    \u003c\/li\u003e\n\u003cli\u003e  CNC machined to 1 gram    \u003c\/li\u003e\n\u003cli\u003e  Include wrist pins    \u003c\/li\u003e\n\u003cli\u003e  Accumulator groove included    \u003c\/li\u003e\n\u003cli\u003e Double pin oilers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003ePart Number: SC7222\u003cbr\u003e\u003cbr\u003eFOR BEST PRICING CALL\/EMAIL!!! \u003c\/b\u003e","brand":"CP Pistons","offers":[{"title":"Default Title","offer_id":31125877751910,"sku":"SC7222","price":679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cp-pistons-rings-87mm-bore-10mm-over-for-evo-x-pistonsrings-cp-pistons-sc7222.jpg?v=1614521505"},{"product_id":"cp-pistons-rings-86-5mm-bore-0-5mm-over-for-evo-x","title":"CP Pistons \u0026 Rings 86.5mm Bore 0.5mm Over for EVO X","description":"From Drag to Endurance CP pistons have proven their quality in the racing community. These pistons for the 08-10 Evo X are avialable in 86mm stock bore, 86.5mm w\/ 0.5 overbore, or 87.0mm w\/ 1.0mm overbore and retain a 9.0 compression ratio. These pistons are designed for high horsepower applications and are much stronger then OEM due to the forging process CP uses. The CP pistons for the Evo X 4B11 are an excellent choice for your engine build.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNotes:\u003c\/b\u003e\u003cul\u003e    \u003cli\u003e  High strength aluminum forging    \u003c\/li\u003e\n\u003cli\u003e  Lightweight design    \u003c\/li\u003e\n\u003cli\u003e  CNC machined to 1 gram    \u003c\/li\u003e\n\u003cli\u003e  Include wrist pins    \u003c\/li\u003e\n\u003cli\u003e  Accumulator groove included    \u003c\/li\u003e\n\u003cli\u003e Double pin oilers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003ePart Number: SC7221\u003cbr\u003e\u003cbr\u003eFOR BEST PRICING CALL\/EMAIL!!! \u003c\/b\u003e","brand":"CP Pistons","offers":[{"title":"Default Title","offer_id":31125877817446,"sku":"SC7221","price":679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cp-pistons-rings-865mm-bore-05mm-over-for-evo-x-pistonsrings-cp-pistons-sc7221.jpg?v=1614521506"},{"product_id":"cp-pistons-rings-stock-86mm-bore-for-evo-x","title":"CP Pistons \u0026 Rings Stock 86mm Bore for Evo X","description":"From Drag to Endurance CP pistons have proven their quality in the racing community. These pistons for the 08-10 Evo X are avialable in 86mm stock bore, 86.5mm w\/ 0.5 overbore, or 87.0mm w\/ 1.0mm overbore and retain a 9.0 compression ratio. These pistons are designed for high horsepower applications and are much stronger then OEM due to the forging process CP uses. The CP pistons for the Evo X 4B11 are an excellent choice for your engine build.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNotes:\u003c\/b\u003e\u003cul\u003e    \u003cli\u003e  High strength aluminum forging    \u003c\/li\u003e\n\u003cli\u003e  Lightweight design    \u003c\/li\u003e\n\u003cli\u003e  CNC machined to 1 gram    \u003c\/li\u003e\n\u003cli\u003e  Include wrist pins    \u003c\/li\u003e\n\u003cli\u003e  Accumulator groove included    \u003c\/li\u003e\n\u003cli\u003e Double pin oilers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003ePart Number: SC7220\u003cbr\u003e\u003cbr\u003eFOR BEST PRICING CALL\/EMAIL!!! \u003c\/b\u003e","brand":"CP Pistons","offers":[{"title":"Default Title","offer_id":31125877850214,"sku":"SC7220","price":679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cp-pistons-rings-stock-86mm-bore-for-evo-x-pistonsrings-cp-pistons-sc7220.jpg?v=1614521508"},{"product_id":"acl-main-bearing-sets-mitsubishi-evo-x","title":"ACL [08-15 Mitsubishi EVO X] Main Bearing Sets","description":"\u003cp\u003eACL Race Series main bearings for the 2008-2015 Mitsubishi Lancer Evolution X with the 4B11T 2.0L inline-4 engine, for engine builders who need a performance main bearing set for the crankshaft.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eACL Race Series main bearing set identified by the H suffix in the set number.\u003c\/li\u003e\n\u003cli\u003eTrimetal construction: lead-tin-copper overlay, copper-lead-tin lining, and SAE1010 high-tensile steel backing.\u003c\/li\u003e\n\u003cli\u003eMain bearings feature full 180-degree grooved uppers with matching partial groove in the lowers, enlarged ID chamfers, and increased eccentricity to assist hydrodynamic oil film formation.\u003c\/li\u003e\n\u003cli\u003eNo flash plating is applied to the backs of the shells, improving bearing-to-housing contact and heat transfer.\u003c\/li\u003e\n\u003cli\u003eSet number: 5M1237H. Available sizes: STD, .025 and .25; the HX version (5M1237HX) is available in STD only and provides an extra 0.001 in (0.025 mm) oil clearance.\u003c\/li\u003e\n\u003cli\u003eMain bearing technical data for 5M1237H: tunnel 56.000-56.018 mm, shaft 51.973-51.985 mm, maximum wall 1.996 mm, maximum length 18.00 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Mitsubishi Lancer Evolution X?\u003c\/strong\u003e Yes, this main bearing set is for the 4B11T 2.0L engine in the Mitsubishi Lancer Evolution X. Confirm your engine is the 4B11T before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One ACL Race Series main bearing set in the size selected. The matching thrust washer set and rod bearing set are sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat should I check before installing these bearings?\u003c\/strong\u003e Engine bearings require proper tolerance to be measured before purchase. Measure the journals and assembled clearances, and consult a professional engine builder if you are not sure what size your build requires.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL","offers":[{"title":"Race Series Main Bearing Set (+.025 Over)","offer_id":31143262060646,"sku":"acl5M1237H-.025","price":107.0,"currency_code":"USD","in_stock":true},{"title":"Race Series Main Bearing Set (+.25 Over)","offer_id":31143262093414,"sku":"acl5M1237H-.25","price":107.0,"currency_code":"USD","in_stock":true},{"title":"Race Series Main Bearing Set (Standard)","offer_id":31143262126182,"sku":"acl5M1237H-STD","price":107.0,"currency_code":"USD","in_stock":true},{"title":"Race Series Main Bearing Set w\/ Extra Oil Clearance (Standard)","offer_id":31143262158950,"sku":"acl5M1237HX-STD","price":107.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/acl-main-bearing-sets-mitsubishi-evo-x-5m1237h-main-bearings-acl-race-series-main-bearing-set-025-over-acl5m1237h-025.jpg?v=1614523050"},{"product_id":"acl-rod-bearing-sets-mitsubishi-evo-x","title":"ACL [08-15 Mitsubishi EVO X] Rod Bearing Sets","description":"\u003cp\u003eACL Race Series connecting rod bearings for the 2008-2015 Mitsubishi Lancer Evolution X with the 4B11T 2.0L inline-4 engine, for engine builders replacing rod bearings during a rods-and-pistons build.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eACL Race Series connecting rod bearing set identified by the H suffix in the set number.\u003c\/li\u003e\n\u003cli\u003eTrimetal construction: lead-tin-copper overlay, copper-lead-tin lining, and SAE1010 high-tensile steel backing.\u003c\/li\u003e\n\u003cli\u003eFeatures include hardened steel backs, increased crush for improved bearing retention, elimination of flash plating, and enlarged ID chamfers.\u003c\/li\u003e\n\u003cli\u003eSet number: 4B1236H. Available sizes: STD, .025 and .25; the HX version (4B1236HX) is available in STD only and provides an extra 0.001 in (0.025 mm) oil clearance.\u003c\/li\u003e\n\u003cli\u003eRod bearing technical data for 4B1236H: tunnel 55.000-55.010 mm, shaft 51.954-51.972 mm, maximum wall 1.500 mm, maximum length 17.00 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Mitsubishi Lancer Evolution X?\u003c\/strong\u003e Yes, this rod bearing set is for the 4B11T 2.0L engine in the Mitsubishi Lancer Evolution X. Confirm your engine is the 4B11T before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One ACL Race Series connecting rod bearing set in the size selected. The main bearing set is sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat should I check before installing these bearings?\u003c\/strong\u003e Engine bearings require proper tolerance to be measured before purchase. Measure the journals and assembled clearances, and consult a professional engine builder if you are not sure what size your build requires.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ACL","offers":[{"title":"4B11T Race Series Rod Bearing Set (+.025mm Over)","offer_id":31143262552166,"sku":"acl4B1236H-.025","price":62.0,"currency_code":"USD","in_stock":true},{"title":"4B11T Race Series Rod Bearing Set (+.25mm Over)","offer_id":31143262584934,"sku":"acl4B1236H-.25","price":62.0,"currency_code":"USD","in_stock":true},{"title":"4B11T Race Series Rod Bearing Set (Standard)","offer_id":31143262617702,"sku":"acl4B1236H-STD","price":62.0,"currency_code":"USD","in_stock":true},{"title":"4B11T Race Series Rod Bearing Set W\/ Extra Oil Clearance (Standard)","offer_id":31143262650470,"sku":"acl4B1236HX-STD","price":62.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/acl-rod-bearing-sets-mitsubishi-evo-x-4b1236h-main-bearings-acl-4b11t-race-series-rod-bearing-set-025mm-over-acl4b1236h-025.jpg?v=1614523051"},{"product_id":"je-pistons-rings-86-bore-86mm-stroke-9-0-1-comp-mitsubishi-evo-x-4b11t","title":"JE Pistons [08-15 EVO X] Pistons \u0026 Rings 86mm Bore 86mm Stroke 9.0:1 Compression 4B11T Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged pistons and rings for the Mitsubishi Lancer Evolution X 4B11T engine, with the New Asymmetrical FSR forging. State of the art asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 296904\u003c\/li\u003e\n\u003cli\u003eBore: 86mm\u003c\/li\u003e\n\u003cli\u003eStroke: 86mm\u003c\/li\u003e\n\u003cli\u003eCompression ratio: 9.0:1\u003c\/li\u003e\n\u003cli\u003eEngine: 4B11T\u003c\/li\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eIn this environment, higher boost levels or heavy nitrous usage necessitate JE's wrought 2618 alloy.\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation.\u003c\/li\u003e\n\u003cli\u003eDished pistons feature new Smooth Finished Crown process for excellent flame travel.\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.866 x 2.250 straight wall carbon steel wrist pin provided. Round style pistons use 2.350 length pins.\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my Mitsubishi EVO X?\u003c\/strong\u003e\u003cbr\u003eYes — this piston set is for the Mitsubishi Lancer Evolution X with the 4B11T engine, with an 86mm bore, 86mm stroke and 9.0:1 compression ratio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eThe set includes 4 pistons and 4 rings, with .866 x 2.250 straight wall carbon steel wrist pins, pin fitting and wire locks included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is any modification needed during installation?\u003c\/strong\u003e\u003cbr\u003eYes — an oil squirter modification is needed for Asymmetrical FSR pistons. The squirter can be bent or the locating pin removed for clearance, and rod to oil squirter clearance should be checked when relocating the oil squirter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What material are these pistons made from?\u003c\/strong\u003e\u003cbr\u003eThese pistons are made from 2618 T6 high tensile forged aluminum.\u003c\/p\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31173000986726,"sku":"je296904","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-86-bore-86mm-stroke-901-comp-mitsubishi-evo-x-4b11t-296904-piston-rings-and-clips-je-pistons-je296904.jpg?v=1614530230"},{"product_id":"je-pistons-rings-86-bore-86mm-stroke-10-0-1-comp-mitsubishi-evo-x-4b11t","title":"JE Pistons [08-15 EVO X] Pistons \u0026 Rings 86mm Bore 86mm Stroke 10.0:1 Compression 4B11T Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged pistons and rings for the Mitsubishi Lancer Evolution X 4B11T engine, with the New Asymmetrical FSR forging. State of the art asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 317840\u003c\/li\u003e\n\u003cli\u003eBore: 86mm\u003c\/li\u003e\n\u003cli\u003eStroke: 86mm\u003c\/li\u003e\n\u003cli\u003eCompression ratio: 10.0:1\u003c\/li\u003e\n\u003cli\u003eEngine: 4B11T\u003c\/li\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eIn this environment, higher boost levels or heavy nitrous usage necessitate JE's wrought 2618 alloy.\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation.\u003c\/li\u003e\n\u003cli\u003eDished pistons feature new Smooth Finished Crown process for excellent flame travel.\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.866 x 2.250 straight wall carbon steel wrist pin provided. Round style pistons use 2.350 length pins.\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my Mitsubishi EVO X?\u003c\/strong\u003e\u003cbr\u003eYes — this piston set is for the Mitsubishi Lancer Evolution X with the 4B11T engine, with an 86mm bore, 86mm stroke and 10.0:1 compression ratio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eThe set includes 4 pistons and 4 rings, with .866 x 2.250 straight wall carbon steel wrist pins, pin fitting and wire locks included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is any modification needed during installation?\u003c\/strong\u003e\u003cbr\u003eYes — an oil squirter modification is needed for Asymmetrical FSR pistons. The squirter can be bent or the locating pin removed for clearance, and rod to oil squirter clearance should be checked when relocating the oil squirter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What material are these pistons made from?\u003c\/strong\u003e\u003cbr\u003eThese pistons are made from 2618 T6 high tensile forged aluminum.\u003c\/p\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31173001052262,"sku":"je317840","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-86-bore-86mm-stroke-1001-comp-mitsubishi-evo-x-4b11t-317840-piston-rings-and-clips-je-pistons-je317840.jpg?v=1614530232"},{"product_id":"je-pistons-rings-86-5-bore-86mm-stroke-9-0-1-comp-mitsubishi-evo-x-4b11t","title":"JE Pistons [08-15 EVO X] Pistons \u0026 Rings 86.5mm Bore 86mm Stroke 9.0:1 Compression 4B11T Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged pistons and rings for the Mitsubishi Lancer Evolution X 4B11T engine, with the New Asymmetrical FSR forging. State of the art asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 296905\u003c\/li\u003e\n\u003cli\u003eBore: 86.5mm\u003c\/li\u003e\n\u003cli\u003eStroke: 86mm\u003c\/li\u003e\n\u003cli\u003eCompression ratio: 9.0:1\u003c\/li\u003e\n\u003cli\u003eEngine: 4B11T\u003c\/li\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eIn this environment, higher boost levels or heavy nitrous usage necessitate JE's wrought 2618 alloy.\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation.\u003c\/li\u003e\n\u003cli\u003eDished pistons feature new Smooth Finished Crown process for excellent flame travel.\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.866 x 2.250 straight wall carbon steel wrist pin provided. Round style pistons use 2.350 length pins.\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my Mitsubishi EVO X?\u003c\/strong\u003e\u003cbr\u003eYes — this piston set is for the Mitsubishi Lancer Evolution X with the 4B11T engine, with an 86.5mm bore, 86mm stroke and 9.0:1 compression ratio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eThe set includes 4 pistons and 4 rings, with .866 x 2.250 straight wall carbon steel wrist pins, pin fitting and wire locks included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is any modification needed during installation?\u003c\/strong\u003e\u003cbr\u003eYes — an oil squirter modification is needed for Asymmetrical FSR pistons. The squirter can be bent or the locating pin removed for clearance, and rod to oil squirter clearance should be checked when relocating the oil squirter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What material are these pistons made from?\u003c\/strong\u003e\u003cbr\u003eThese pistons are made from 2618 T6 high tensile forged aluminum.\u003c\/p\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31173001150566,"sku":"je296905","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-865-bore-86mm-stroke-901-comp-mitsubishi-evo-x-4b11t-296905-piston-rings-and-clips-je-pistons-je296905.jpg?v=1614530234"},{"product_id":"je-pistons-rings-86-5-bore-86mm-stroke-10-0-1-comp-mitsubishi-evo-x-4b11t","title":"JE Pistons [08-15 EVO X] Pistons \u0026 Rings 86.5mm Bore 86mm Stroke 10.0:1 Compression 4B11T Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged pistons and rings for the Mitsubishi Lancer Evolution X 4B11T engine, with the New Asymmetrical FSR forging. State of the art asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 317841\u003c\/li\u003e\n\u003cli\u003eBore: 86.5mm\u003c\/li\u003e\n\u003cli\u003eStroke: 86mm\u003c\/li\u003e\n\u003cli\u003eCompression ratio: 10.0:1\u003c\/li\u003e\n\u003cli\u003eEngine: 4B11T\u003c\/li\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eIn this environment, higher boost levels or heavy nitrous usage necessitate JE's wrought 2618 alloy.\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation.\u003c\/li\u003e\n\u003cli\u003eDished pistons feature new Smooth Finished Crown process for excellent flame travel.\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.866 x 2.250 straight wall carbon steel wrist pin provided. Round style pistons use 2.350 length pins.\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my Mitsubishi EVO X?\u003c\/strong\u003e\u003cbr\u003eYes — this piston set is for the Mitsubishi Lancer Evolution X with the 4B11T engine, with an 86.5mm bore, 86mm stroke and 10.0:1 compression ratio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eThe set includes 4 pistons and 4 rings, with .866 x 2.250 straight wall carbon steel wrist pins, pin fitting and wire locks included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is any modification needed during installation?\u003c\/strong\u003e\u003cbr\u003eYes — an oil squirter modification is needed for Asymmetrical FSR pistons. The squirter can be bent or the locating pin removed for clearance, and rod to oil squirter clearance should be checked when relocating the oil squirter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What material are these pistons made from?\u003c\/strong\u003e\u003cbr\u003eThese pistons are made from 2618 T6 high tensile forged aluminum.\u003c\/p\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31173001248870,"sku":"je317841","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-865-bore-86mm-stroke-1001-comp-mitsubishi-evo-x-4b11t-317841-piston-rings-and-clips-je-pistons-je317841.jpg?v=1614530236"},{"product_id":"je-pistons-rings-89-bore-86mm-stroke-10-0-1-comp-mitsubishi-evo-x-4b11t","title":"JE Pistons [08-15 EVO X] Pistons \u0026 Rings 89mm Bore 86mm Stroke 10.0:1 Compression 4B11T Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged pistons and rings for the Mitsubishi Lancer Evolution X 4B11T engine, with the New Asymmetrical FSR forging. State of the art asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 317844\u003c\/li\u003e\n\u003cli\u003eBore: 89mm\u003c\/li\u003e\n\u003cli\u003eStroke: 86mm\u003c\/li\u003e\n\u003cli\u003eCompression ratio: 10.0:1\u003c\/li\u003e\n\u003cli\u003eEngine: 4B11T\u003c\/li\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eIn this environment, higher boost levels or heavy nitrous usage necessitate JE's wrought 2618 alloy.\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation.\u003c\/li\u003e\n\u003cli\u003eDished pistons feature new Smooth Finished Crown process for excellent flame travel.\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.866 x 2.250 straight wall carbon steel wrist pin provided. Round style pistons use 2.350 length pins.\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my Mitsubishi EVO X?\u003c\/strong\u003e\u003cbr\u003eYes — this piston set is for the Mitsubishi Lancer Evolution X with the 4B11T engine, with an 89mm bore, 86mm stroke and 10.0:1 compression ratio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eThe set includes 4 pistons and 4 rings, with .866 x 2.250 straight wall carbon steel wrist pins, pin fitting and wire locks included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is any modification needed during installation?\u003c\/strong\u003e\u003cbr\u003eYes — an oil squirter modification is needed for Asymmetrical FSR pistons. The squirter can be bent or the locating pin removed for clearance, and rod to oil squirter clearance should be checked when relocating the oil squirter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What material are these pistons made from?\u003c\/strong\u003e\u003cbr\u003eThese pistons are made from 2618 T6 high tensile forged aluminum.\u003c\/p\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31173001412710,"sku":"je317844","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-89-bore-86mm-stroke-1001-comp-mitsubishi-evo-x-4b11t-317844-piston-rings-and-clips-je-pistons-je317844.jpg?v=1614530239"},{"product_id":"je-pistons-rings-90-bore-86mm-stroke-9-0-1-comp-mitsubishi-evo-x-4b11t","title":"JE Pistons [08-15 EVO X] Pistons \u0026 Rings 89mm Bore 86mm Stroke 9.0:1 Compression 4B11T Asymmetrical FSR","description":"\u003cp\u003eJE Pistons 317839 is a forged 4-piston kit for the Mitsubishi 4B11T engine. It is a 89.00mm bore, 9.00:1 dish piston on JE's FSR forging, made in the USA from 2618 aluminum.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eJE part number: 317839 (4-cylinder piston kit)\u003c\/li\u003e\n\u003cli\u003eBore: 89.00mm (3.504 in.)\u003c\/li\u003e\n\u003cli\u003eCompression ratio: 9.00:1\u003c\/li\u003e\n\u003cli\u003eDish volume: -9.50cc\u003c\/li\u003e\n\u003cli\u003eCompression height: 1.313 in\u003c\/li\u003e\n\u003cli\u003eForging type: FSR (Forged Side Relief)\u003c\/li\u003e\n\u003cli\u003eRing thicknesses: 0.0400 in top, 0.0480 in second, 0.111 in oil\u003c\/li\u003e\n\u003cli\u003eWrist pin: 0.905 in outer diameter, 2.250 in long, 0.150 in wall\u003c\/li\u003e\n\u003cli\u003eIncludes wrist pins, locks and JE Pro Seal piston rings\u003c\/li\u003e\n\u003cli\u003eForged in the USA from 2618 aluminum\u003c\/li\u003e\n\u003cli\u003eJE custom features on this kit: Accumulator Groove, Smooth Crown Finish, Pin Fit and Skirt Coat\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQuestions \u0026amp; Answers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What bore is this kit?\u003c\/strong\u003e\u003cbr\u003eA: JE lists 317839 at a 89.00mm bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What compression ratio is it?\u003c\/strong\u003e\u003cbr\u003eA: 9.00:1 with a -9.50cc dish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What wrist pin does it use?\u003c\/strong\u003e\u003cbr\u003eA: A 0.905 in outer diameter, 2.250 in long pin.\u003c\/p\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31173001511014,"sku":"je317839","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-90-bore-86mm-stroke-901-comp-mitsubishi-evo-x-4b11t-317839-piston-rings-and-clips-je-pistons-je317839.jpg?v=1614530241"},{"product_id":"je-pistons-rings-89-bore-86mm-stroke-9-0-1-comp-mitsubishi-evo-x-4b11t","title":"JE Pistons [08-15 EVO X] Pistons \u0026 Rings 90mm Bore 86mm Stroke 9.0:1 Compression 4B11T Asymmetrical FSR","description":"\u003cp\u003eJE Pistons 317838 is a forged 4-piston kit for the Mitsubishi 4B11T engine. It is a 90.00mm bore, 9.00:1 dish piston on JE's FSR forging, made in the USA from 2618 aluminum.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eJE part number: 317838 (4-cylinder piston kit)\u003c\/li\u003e\n\u003cli\u003eBore: 90.00mm (3.543 in.)\u003c\/li\u003e\n\u003cli\u003eCompression ratio: 9.00:1\u003c\/li\u003e\n\u003cli\u003eDish volume: -10.90cc\u003c\/li\u003e\n\u003cli\u003eCompression height: 1.313 in\u003c\/li\u003e\n\u003cli\u003eForging type: FSR (Forged Side Relief)\u003c\/li\u003e\n\u003cli\u003eRing thicknesses: 0.0400 in top, 0.0480 in second, 0.111 in oil\u003c\/li\u003e\n\u003cli\u003eWrist pin: 0.905 in outer diameter, 2.250 in long, 0.150 in wall\u003c\/li\u003e\n\u003cli\u003eIncludes wrist pins, locks and JE Pro Seal piston rings\u003c\/li\u003e\n\u003cli\u003eForged in the USA from 2618 aluminum\u003c\/li\u003e\n\u003cli\u003eJE custom features on this kit: Accumulator Groove, Smooth Crown Finish, Pin Fit and Skirt Coat\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQuestions \u0026amp; Answers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What bore is this kit?\u003c\/strong\u003e\u003cbr\u003eA: JE lists 317838 at a 90.00mm bore.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What compression ratio is it?\u003c\/strong\u003e\u003cbr\u003eA: 9.00:1 with a -10.90cc dish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What wrist pin does it use?\u003c\/strong\u003e\u003cbr\u003eA: A 0.905 in outer diameter, 2.250 in long pin.\u003c\/p\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31173001543782,"sku":"je317838","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-89-bore-86mm-stroke-901-comp-mitsubishi-evo-x-4b11t-317838-piston-rings-and-clips-je-pistons-je317838.jpg?v=1614530242"},{"product_id":"je-pistons-rings-90-bore-86mm-stroke-10-0-1-comp-mitsubishi-evo-x-4b11t","title":"JE Pistons [08-15 EVO X] Pistons \u0026 Rings 90mm Bore 86mm Stroke 10.0:1 Compression 4B11T Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged pistons and rings for the Mitsubishi Lancer Evolution X 4B11T engine, with the New Asymmetrical FSR forging. State of the art asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 317845\u003c\/li\u003e\n\u003cli\u003eBore: 90mm\u003c\/li\u003e\n\u003cli\u003eStroke: 86mm\u003c\/li\u003e\n\u003cli\u003eCompression ratio: 10.0:1\u003c\/li\u003e\n\u003cli\u003eEngine: 4B11T\u003c\/li\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eIn this environment, higher boost levels or heavy nitrous usage necessitate JE's wrought 2618 alloy.\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation.\u003c\/li\u003e\n\u003cli\u003eDished pistons feature new Smooth Finished Crown process for excellent flame travel.\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.866 x 2.250 straight wall carbon steel wrist pin provided. Round style pistons use 2.350 length pins.\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my Mitsubishi EVO X?\u003c\/strong\u003e\u003cbr\u003eYes — this piston set is for the Mitsubishi Lancer Evolution X with the 4B11T engine, with a 90mm bore, 86mm stroke and 10.0:1 compression ratio.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eThe set includes 4 pistons and 4 rings, with .866 x 2.250 straight wall carbon steel wrist pins, pin fitting and wire locks included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Is any modification needed during installation?\u003c\/strong\u003e\u003cbr\u003eYes — an oil squirter modification is needed for Asymmetrical FSR pistons. The squirter can be bent or the locating pin removed for clearance, and rod to oil squirter clearance should be checked when relocating the oil squirter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What material are these pistons made from?\u003c\/strong\u003e\u003cbr\u003eThese pistons are made from 2618 T6 high tensile forged aluminum.\u003c\/p\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31173001707622,"sku":"je317845","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-90-bore-86mm-stroke-1001-comp-mitsubishi-evo-x-4b11t-317845-piston-rings-and-clips-je-pistons-je317845.jpg?v=1614530246"},{"product_id":"k1-technologies-connecting-rods-mitsubishi-evo-x-2008-2015","title":"K1 Technologies [08-15 Mitsubishi EVO X] Connecting Rods","description":"\u003cp\u003eThe K1 Technologies connecting rod set for the 2008-2015 Mitsubishi EVO X is built for high horsepower applications, using billet 4340 steel and K1 proprietary ARP rod bolts. K1 Technologies connecting rods are quality built from billet 4340 steel for superior strength in high horsepower applications. K1 has also called upon the experts at ARP fasteners to design special K1 proprietary rod bolts with asymmetrical threads to equally load each thread when under pressure. K1 rods are shot peened for improved fatigue life and are finished in the USA using only state of the art Sunnen hones. K1 rod housing bore tolerances of +\/- .000050in (50 millionths) match some of the tightest accepted tolerances in the industry. All K1 rod sets are weight-matched to +\/- 1 gram and boxed with the individual rotating, reciprocating, and total weights conveniently noted for balancing. A special wrist pin bushing material is also used with these assemblies offering optimal friction reduction.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: 032CK21144\u003c\/li\u003e\n\u003cli\u003eVehicle \/ engine fitment: Mitsubishi EVO X, 2008-2015\u003c\/li\u003e\n\u003cli\u003eMaterial: Billet 4340 steel\u003c\/li\u003e\n\u003cli\u003eRod bolts: K1 proprietary ARP fasteners with asymmetrical threads\u003c\/li\u003e\n\u003cli\u003eShot peened for improved fatigue life\u003c\/li\u003e\n\u003cli\u003eFinished in the USA using Sunnen hones\u003c\/li\u003e\n\u003cli\u003eHousing bore tolerance: +\/- .000050 in (50 millionths)\u003c\/li\u003e\n\u003cli\u003eWeight-matched to +\/- 1 gram per set\u003c\/li\u003e\n\u003cli\u003eK1 rods are sold in full sets of four (4) rods\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this fit my Mitsubishi EVO X?\u003c\/strong\u003e\u003cbr\u003eYes — this connecting rod set fits the 2008-2015 Mitsubishi EVO X.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eThe box contains a full set of four (4) K1 Technologies connecting rods with the individual rotating, reciprocating, and total weights noted for balancing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What are these connecting rods made of?\u003c\/strong\u003e\u003cbr\u003eThe rods are built from billet 4340 steel, shot peened for improved fatigue life, and use a special wrist pin bushing material offering optimal friction reduction.\u003c\/p\u003e","brand":"K1 Technologies","offers":[{"title":"Default Title","offer_id":31173022777446,"sku":"032CK21144","price":371.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/square-20170705862758.jpg?v=1792224003"},{"product_id":"manley-piston-set-86-5mm-bore-5mm-9-0-cr-mitsubishi-evo-x-2008-2015","title":"Manley [08-15 Mitsubishi EVO X] Piston Set 86.5mm Bore +0.5mm 9.0:1 CR","description":"\u003cp\u003eThe Manley piston set for the 2008-2015 Mitsubishi EVO X 4B11T engine is forged and dished and machined of high strength 2618 material. Each design is lightweight yet robust enough to deliver long service life, and round wire locks, tool steel wrist pins and piston rings are included with every set.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 614005C-4\u003c\/li\u003e\n\u003cli\u003eBore: 86.5mm (+.5mm)\u003c\/li\u003e\n\u003cli\u003eCompression Distance: 1.313\"\u003c\/li\u003e\n\u003cli\u003eCompression Ratio: 9.0:1\u003c\/li\u003e\n\u003cli\u003eCylinder Head: 49cc\u003c\/li\u003e\n\u003cli\u003eDome Volume: -5cc\u003c\/li\u003e\n\u003cli\u003ePiston Type: Dish\u003c\/li\u003e\n\u003cli\u003eRod Length: 143.66mm\u003c\/li\u003e\n\u003cli\u003eStroke: 86mm\u003c\/li\u003e\n\u003cli\u003eWeight: 343g\u003c\/li\u003e\n\u003cli\u003eMaterial: High strength 2618\u003c\/li\u003e\n\u003cli\u003eIncludes a full set of four (4) pistons, piston rings and hardware\u003c\/li\u003e\n\u003cli\u003eA proprietary multi-step top ring groove machining process assures optimum control of the groove size, geometry, flatness and finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my vehicle?\u003c\/strong\u003e Yes. This Manley piston set, part number 614005C-4, fits the 2008-2015 Mitsubishi EVO X with the 4B11T engine, with an 86.5mm (+.5mm) bore.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e A full set of four (4) pistons, piston rings and hardware. Round wire locks and tool steel wrist pins are included with every set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat are the piston specifications?\u003c\/strong\u003e The pistons have an 86.5mm bore, 9.0:1 compression ratio, -5cc dome volume, 1.313\" compression distance and a weight of 343g.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manley Performance","offers":[{"title":"Default Title","offer_id":31173098045542,"sku":"man614005C-4","price":741.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/manley-piston-set-865mm-bore-5mm-90-cr-mitsubishi-evo-x-2008-2015-614005c-4-pistons-and-sleeves-manley-performance-man614005c-4.jpg?v=1614530869"},{"product_id":"manley-piston-set-86mm-bore-std-9-0-cr-mitsubishi-evo-x-2008-2015","title":"Manley [08-15 Mitsubishi EVO X] Piston Set 86mm Bore STD 9.0:1 CR","description":"\u003cp\u003eThe Manley piston set for the 2008-2015 Mitsubishi EVO X 4B11T engine is forged and dished and machined of high strength 2618 material. Each design is lightweight yet robust enough to deliver long service life, and round wire locks, tool steel wrist pins and piston rings are included with every set.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 614000C-4\u003c\/li\u003e\n\u003cli\u003eBore: 86mm (STD)\u003c\/li\u003e\n\u003cli\u003eCompression Distance: 1.313\"\u003c\/li\u003e\n\u003cli\u003eCompression Ratio: 9.0:1\u003c\/li\u003e\n\u003cli\u003eCylinder Head: 49cc\u003c\/li\u003e\n\u003cli\u003eDome Volume: -5cc\u003c\/li\u003e\n\u003cli\u003ePiston Type: Dish\u003c\/li\u003e\n\u003cli\u003eRod Length: 143.66mm\u003c\/li\u003e\n\u003cli\u003eStroke: 86mm\u003c\/li\u003e\n\u003cli\u003eWeight: 337g\u003c\/li\u003e\n\u003cli\u003eMaterial: High strength 2618\u003c\/li\u003e\n\u003cli\u003eIncludes a full set of four (4) pistons, piston rings and hardware\u003c\/li\u003e\n\u003cli\u003eA proprietary multi-step top ring groove machining process assures optimum control of the groove size, geometry, flatness and finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my vehicle?\u003c\/strong\u003e Yes. This Manley piston set, part number 614000C-4, fits the 2008-2015 Mitsubishi EVO X with the 4B11T engine, with a standard 86mm bore.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e A full set of four (4) pistons, piston rings and hardware. Round wire locks and tool steel wrist pins are included with every set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat are the piston specifications?\u003c\/strong\u003e The pistons have a standard 86mm bore, 9.0:1 compression ratio, -5cc dome volume, 1.313\" compression distance and a weight of 337g.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manley Performance","offers":[{"title":"Default Title","offer_id":31173098078310,"sku":"man614000C-4","price":741.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/manley-piston-set-86mm-bore-std-90-cr-mitsubishi-evo-x-2008-2015-614000c-4-pistons-and-sleeves-manley-performance-man614000c-4.jpg?v=1614530869"},{"product_id":"manley-h-beam-connecting-rods-mitsubishi-evo-x-2008-2015","title":"Manley [08-15 Mitsubishi EVO X] H-Beam Connecting Rods","description":"\u003cp\u003eThe Manley H-Beam connecting rods for the 2008-2015 Mitsubishi EVO X are a lower cost alternative to the Turbo Tuff series. Manley H-Beam rods are weight matched within +\/- 1.5 grams of each other and both ends of the rod are rounded perfectly, and they are the perfect rods for street applications pushing up to 600 wheel horsepower.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 14029-4\u003c\/li\u003e\n\u003cli\u003eBig End Bore: 2.165\"\u003c\/li\u003e\n\u003cli\u003eBig End Width: 0.860\"\u003c\/li\u003e\n\u003cli\u003eCenter-to-Center: 5.656\"\u003c\/li\u003e\n\u003cli\u003ePin Bore: .9063\"\u003c\/li\u003e\n\u003cli\u003ePin Diameter: .9055\" (23mm)\u003c\/li\u003e\n\u003cli\u003eWeight: 527g\u003c\/li\u003e\n\u003cli\u003eWeight matched within +\/- 1.5 grams of each other\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my vehicle?\u003c\/strong\u003e Yes. These Manley H-Beam connecting rods, part number 14029-4, fit the 2008-2015 Mitsubishi EVO X.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One set of Manley H-Beam connecting rods, part number 14029-4, weight matched within +\/- 1.5 grams of each other.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat are the rod specifications?\u003c\/strong\u003e The rods have a 5.656\" center-to-center length, a 2.165\" big end bore, a .9055\" (23mm) pin diameter and a weight of 527g.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manley Performance","offers":[{"title":"Default Title","offer_id":31173098143846,"sku":"man14029-4","price":554.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/manley-h-beam-connecting-rods-mitsubishi-evo-x-2008-2015-14029-4-rods-manley-performance-man14029-4.jpg?v=1614530870"},{"product_id":"manley-4340-billet-94mm-stroke-turbo-tuff-series-crankshaft-mitsubishi-evo-x","title":"Manley [08-15 EVO X] 4340 Billet 94mm Stroke Turbo Tuff Series Crankshaft","description":"\u003cp\u003eThe Manley 4340 Billet 94mm Stroke Turbo Tuff Series Crankshaft (part number 190230B) is a billet crankshaft for the Mitsubishi EVO X, built with a 94mm stroke for high-performance engine builds.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 190230B\u003c\/li\u003e\n\u003cli\u003eApplication: Mitsubishi EVO X\u003c\/li\u003e\n\u003cli\u003eMaterial: 4340 Billet\u003c\/li\u003e\n\u003cli\u003eStroke: 94mm\u003c\/li\u003e\n\u003cli\u003eSeries: Turbo Tuff\u003c\/li\u003e\n\u003cli\u003e4340 Billet\u003c\/li\u003e\n\u003cli\u003eMulti-step heat treatment process\u003c\/li\u003e\n\u003cli\u003eStress relieved and shot peened\u003c\/li\u003e\n\u003cli\u003eNitrided\u003c\/li\u003e\n\u003cli\u003e100% Magnafluxed\u003c\/li\u003e\n\u003cli\u003eSpecial teardrop diagonal oiling\u003c\/li\u003e\n\u003cli\u003eKnife-edged counterweights\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this fit my Mitsubishi EVO X?\u003c\/strong\u003e\u003cbr\u003eA: This crankshaft is designed for the Mitsubishi EVO X. It has a 94mm stroke, so confirm your pistons and rods are matched to that stroke before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The box contains one Manley Turbo Tuff Series crankshaft (part number 190230B).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is this crankshaft made from?\u003c\/strong\u003e\u003cbr\u003eA: The crankshaft is made from 4340 billet and is nitrided, stress relieved, shot peened and 100% magnafluxed.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manley Performance","offers":[{"title":"Default Title","offer_id":31173106729062,"sku":"man190230B","price":1865.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/manley-4340-billet-94mm-stroke-turbo-tuff-series-crankshaft-mitsubishi-evo-x-190230b-crankshafts-manley-performance-man190230b.jpg?v=1614530924"},{"product_id":"manley-valve-spring-and-retainer-kit-mitsubishi-evo-x-4b11t","title":"Manley [08-15 EVO X] Valve Spring and Retainer Kit 4B11T","description":"\u003cp\u003eThe Manley Valve Spring and Retainer Kit (part number 26195) is a valve spring and titanium retainer kit for the 4B11T engine in the Mitsubishi EVO X, designed for high-revving performance engine builds and sold in sets of 16.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 26195\u003c\/li\u003e\n\u003cli\u003eEngine: Mitsubishi 4B11T (EVO X)\u003c\/li\u003e\n\u003cli\u003eQuantity: Sold in sets of 16\u003c\/li\u003e\n\u003cli\u003eManley valve springs are wound using the cleanest alloy available and are heat treated for durability\u003c\/li\u003e\n\u003cli\u003eManley valve springs are designed for high revving applications\u003c\/li\u003e\n\u003cli\u003eManley titanium retainers are made of rugged, certified, heat treated aerospace grade titanium\u003c\/li\u003e\n\u003cli\u003eThe lightweight retainer mass allows the motor to rev higher safely while keeping valve float in check\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this fit my Mitsubishi EVO X 4B11T?\u003c\/strong\u003e\u003cbr\u003eA: This kit is designed for the 4B11T engine in the Mitsubishi EVO X. It is sold in sets of 16.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The kit is sold in sets of 16 valve springs and retainers (part number 26195).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What are the retainers made from?\u003c\/strong\u003e\u003cbr\u003eA: The retainers are made of certified, heat treated aerospace grade titanium.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manley Performance","offers":[{"title":"Default Title","offer_id":31173106860134,"sku":"man26195","price":380.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/manley-valve-spring-and-retainer-kit-mitsubishi-evo-x-4b11t-26195-valve-springs-manley-performance-man26195.jpg?v=1614530928"},{"product_id":"manley-turbo-tuff-connecting-rods-mitsubishi-evo-x-2008-2015","title":"Manley [08-15 EVO X] Turbo Tuff Connecting Rods","description":"\u003cp\u003eThe Manley Turbo Tuff Connecting Rods (part number 14409-4) are Turbo Tuff I Beam connecting rods for the Mitsubishi EVO X, forged from 4340 aircraft quality vacuum degassed material for high-performance engine builds.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 14409-4\u003c\/li\u003e\n\u003cli\u003eApplication: Mitsubishi EVO X\u003c\/li\u003e\n\u003cli\u003eMaterial: Forged 4340 aircraft quality vacuum degassed material\u003c\/li\u003e\n\u003cli\u003eMachined in the USA, shot-peened after machining and magnafluxed\u003c\/li\u003e\n\u003cli\u003eCap Screws: ARP 2000\u003c\/li\u003e\n\u003cli\u003eCenter-to-Center: 5.656\"\u003c\/li\u003e\n\u003cli\u003eBig End Bore: 2.165\"\u003c\/li\u003e\n\u003cli\u003eBig End Width: 0.860\"\u003c\/li\u003e\n\u003cli\u003ePin Diameter: .9055\" (23mm)\u003c\/li\u003e\n\u003cli\u003ePin Bore: .9063\"\u003c\/li\u003e\n\u003cli\u003eWeight: 620g\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this fit my Mitsubishi EVO X?\u003c\/strong\u003e\u003cbr\u003eA: These connecting rods are designed for the Mitsubishi EVO X. Confirm the .9055\" (23mm) pin diameter matches your pistons before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The box contains a set of Manley Turbo Tuff connecting rods (part number 14409-4).\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manley Performance","offers":[{"title":"Default Title","offer_id":31173107253350,"sku":"man14409-4","price":1028.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/manley-turbo-tuff-connecting-rods-mitsubishi-evo-x-2008-2015-14409-4-rods-manley-performance-man14409-4.jpg?v=1614530932"},{"product_id":"manley-86-5mm-bore-5mm-oversize-ring-set-mitsubishi-evo-x","title":"Manley [08-15 Evo X] Piston Ring Set 86.5mm Bore +0.5mm Oversize","description":"\u003cp\u003eManley Sport Compact piston ring set for the 2008-2015 Mitsubishi Evolution X, with a 86.5mm bore (+0.5mm oversize) for engine rebuilds. Ring widths are 1.2mm x 1.2mm x 2.8mm.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 46865-4\u003c\/li\u003e\n\u003cli\u003eBore: 86.5mm (+0.5mm oversize)\u003c\/li\u003e\n\u003cli\u003eRing Widths: 1.2mm x 1.2mm x 2.8mm\u003c\/li\u003e\n\u003cli\u003eApplication: 2008-2015 Mitsubishi Evolution X\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this fit my 2008-2015 Mitsubishi Evolution X?\u003c\/strong\u003e\u003cbr\u003eA: Yes. This Manley piston ring set, part number 46865-4, is for the 2008-2015 Mitsubishi Evolution X, with a 86.5mm bore.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The Manley Sport Compact piston ring set, part number 46865-4, for a 86.5mm bore.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What are the ring widths?\u003c\/strong\u003e\u003cbr\u003eA: The ring widths are 1.2mm x 1.2mm x 2.8mm.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manley Performance","offers":[{"title":"Default Title","offer_id":31173113282662,"sku":"man46865-4","price":164.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/manley-865mm-bore-5mm-oversize-ring-set-mitsubishi-evo-x-46865-4-pistons-and-sleeves-manley-performance-man46865-4.jpg?v=1614530994"},{"product_id":"manley-86mm-bore-standard-size-ring-set-mitsubishi-evo-x","title":"Manley [08-15 Evo X] Piston Ring Set 86mm Bore Standard","description":"\u003cp\u003eManley Sport Compact piston ring set for the 2008-2015 Mitsubishi Evolution X, with a 86mm bore (standard) for engine rebuilds. Ring widths are 1.2mm x 1.2mm x 2.8mm.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 46860-4\u003c\/li\u003e\n\u003cli\u003eBore: 86mm (standard)\u003c\/li\u003e\n\u003cli\u003eRing Widths: 1.2mm x 1.2mm x 2.8mm\u003c\/li\u003e\n\u003cli\u003eApplication: 2008-2015 Mitsubishi Evolution X\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this fit my 2008-2015 Mitsubishi Evolution X?\u003c\/strong\u003e\u003cbr\u003eA: Yes. This Manley piston ring set, part number 46860-4, is for the 2008-2015 Mitsubishi Evolution X, with a 86mm bore.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The Manley Sport Compact piston ring set, part number 46860-4, for a 86mm bore.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What are the ring widths?\u003c\/strong\u003e\u003cbr\u003eA: The ring widths are 1.2mm x 1.2mm x 2.8mm.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Manley Performance","offers":[{"title":"Default Title","offer_id":31173113544806,"sku":"man46860-4","price":164.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/manley-86mm-bore-standard-size-ring-set-mitsubishi-evo-x-46860-4-pistons-and-sleeves-manley-performance-man46860-4.jpg?v=1614530995"},{"product_id":"carrillo-connecting-rods-pro-h-3-8-carr-bolt-mitsubishi-evo-x-2008-2015","title":"Carrillo [08-15 Mitsubishi EVO X] Connecting Rods Pro-H 3\/8 CARR Bolt","description":"\u003cp\u003eThe Carrillo Pro-H connecting rods with 3\/8 CARR bolts for the 2008-2015 Mitsubishi Lancer Evolution X are H-beam connecting rods for builders searching for 4B11 connecting rods for a high-performance EVO X engine build.\u003c\/p\u003e\u003cp\u003eThe H-beam rod has become the industry standard design for high-performance applications. Considering the best overall performance of the part, combined with the least amount of weight, the H-beam is Carrillo's strongest, most durable design available. Carrillo H-beam rods are recommended for race applications where no compromise in performance is possible.\u003c\/p\u003e\u003cp\u003eCarrillo connecting rods are forged and use only the strongest materials to ensure they will hold massive amounts of power. They are run through a thorough inspection process once finished to ensure each rod is made to the highest quality standard. These rods are for enthusiasts that require the absolute best and will not compromise on quality.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePro-H H-beam design\u003c\/li\u003e\n\u003cli\u003e3\/8 inch CARR cap bolts, which can be retorqued as many times as you want and will not need to be replaced\u003c\/li\u003e\n\u003cli\u003eRecommended for race applications; these rods are for 1000+whp race only machines and are not optimal for street use\u003c\/li\u003e\n\u003cli\u003ePart number MI-4B11\u0026gt;-65659S-04\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQuestions \u0026amp; Answers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my 2008-2015 Mitsubishi EVO X?\u003c\/strong\u003e\u003cbr\u003eYes. This Pro-H rod set is listed for the Mitsubishi EVO X 2008-2015.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e\u003cbr\u003eA set of Carrillo Pro-H connecting rods with 3\/8 CARR cap bolts.\u003c\/p\u003e","brand":"Carrillo","offers":[{"title":"Default Title","offer_id":31493868126310,"sku":"MI-4B11\u003e-65659S-04","price":1225.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/carrillo-connecting-rods-pro-h-38-carr-bolt-mitsubishi-evo-x-2008-2015-rods-carrillo-mi-4b11-65659s-04.jpg?v=1614537596"},{"product_id":"carrillo-connecting-rods-pro-h-3-8-wmc-fasteners-mitsubishi-evo-x","title":"Carrillo [08-15 Mitsubishi EVO X] Pro-H 3\/8 WMC Connecting Rods","description":"\u003cp\u003eThe Carrillo Pro-H Connecting Rods for the Mitsubishi EVO X are forged H-beam rods for 2008-2015 Mitsubishi EVO X engine builds with the 4B11 engine. Carrillo connecting rods are forged and use only the strongest materials to ensure they will hold massive amounts of power. They are run through a thorough inspection process once finished to ensure each rod is made to the highest quality standard. These rods are for enthusiasts that require the absolute best and will not compromise on quality.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: MI-4B11\u0026gt;-65659H-04\u003c\/li\u003e\n\u003cli\u003eFitment: Mitsubishi EVO X 2008-2015 (4B11 engine)\u003c\/li\u003e\n\u003cli\u003eBeam Design: Pro-H H-beam — Carrillo's strongest, most durable design available\u003c\/li\u003e\n\u003cli\u003eBolts: 3\/8 inch WMC cap bolts\u003c\/li\u003e\n\u003cli\u003eApplication: Recommended for race applications where no compromise in performance is possible; for 1000+whp race only machines and not optimal for street use\u003c\/li\u003e\n\u003cli\u003eQuantity: Sold in sets of four\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Will these Carrillo Pro-H connecting rods fit my Mitsubishi EVO X?\u003c\/strong\u003e\u003cbr\u003eA: Yes — this set fits the Mitsubishi EVO X from 2008-2015 with the 4B11 engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: This listing is for a set of four Carrillo Pro-H connecting rods with 3\/8 inch WMC cap bolts, part number MI-4B11\u0026gt;-65659H-04.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Are Pro-H rods suitable for street use?\u003c\/strong\u003e\u003cbr\u003eA: Carrillo H-beam rods are recommended for race applications where no compromise in performance is possible. These rods are for 1000+whp race only machines and are not optimal for street use.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Carrillo","offers":[{"title":"Default Title","offer_id":31493868945510,"sku":"MI-4B11\u003e-65659H-04","price":1032.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/carrillo-connecting-rods-pro-h-38-wmc-fasteners-mitsubishi-evo-x-rods-carrillo-mi-4b11-65659h-04.jpg?v=1614537611"},{"product_id":"carrillo-connecting-rods-pro-sa-3-8-wmc-fasteners-mitsubishi-evo-x","title":"Carrillo [08-15 EVO X] Pro-SA 3\/8 WMC Bolt Connecting Rods","description":"\u003cp\u003eThe Carrillo Pro-SA connecting rods with 3\/8 WMC fasteners are forged connecting rods for the 2008-2015 Mitsubishi EVO X, built for enthusiasts who require the absolute best and will not compromise on quality. Carrillo connecting rods are forged and use only the strongest materials to ensure they will hold massive amounts of power. Each rod is run through a thorough inspection process once finished to ensure it is made to the highest quality standard. Pro-Super A beam (Pro-SA) rods are lighter than the traditional H-beam style rod, yet still unbelievably strong. Pro-SA rods bridge the gap between Pro-H and standard Pro-A rods, designed for use in mid to high horsepower and high boost turbocharged and supercharged applications. Pro-SA rods allow for more horsepower and higher RPMs with the advantage of a reduced windage design. Pro-Super A beam rods for the Evo X ship with standard 3\/8 inch WMC cap bolts and are rated to 800whp; they are great for cars that see both street and race driving.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRod type: Pro-Super A beam (Pro-SA)\u003c\/li\u003e\n\u003cli\u003eBolt size: 3\/8 WMC cap bolts\u003c\/li\u003e\n\u003cli\u003eRated to 800whp\u003c\/li\u003e\n\u003cli\u003ePart number: MI-4B11\u003csa-65659h-04\u003e\n\u003c\/sa-65659h-04\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eQuestions \u0026amp; Answers\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Mitsubishi EVO X?\u003c\/strong\u003e Yes — this rod set is for 2008-2015 Mitsubishi EVO X applications; confirm your engine before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat cap bolts do these rods use?\u003c\/strong\u003e These rods ship with standard 3\/8 inch WMC cap bolts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat power are these rods rated for?\u003c\/strong\u003e Pro-Super A beam rods for the Evo X are rated to 800whp and suit cars that see both street and race driving.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Carrillo","offers":[{"title":"Default Title","offer_id":31493869305958,"sku":"MI-4B11\u003cSA-65659H-04","price":891.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/carrillo-connecting-rods-pro-sa-38-wmc-fasteners-mitsubishi-evo-x-rods-carrillo-mi-4b11sa-65659h-04.jpg?v=1614537620"},{"product_id":"king-performance-rod-bearing-set-mitsubishi-evo-x-2008-2015","title":"King Engine Bearings [08-15 Mitsubishi EVO X] Performance Rod Bearing Set - XP","description":"\u003cp\u003eThe King Engine Bearings XP performance rod bearing set is a connecting rod bearing set for the 2008-2015 Mitsubishi EVO X, for dedicated track applications or street cars that may see extended racing or endurance events.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eXP series bearings are designed for dedicated track applications or street cars that may see extended circle track racing or endurance events\u003c\/li\u003e\n\u003cli\u003eFormed from enhanced tri-metal copper lead construction, XP bearings utilize a nickel barrier fused with a SecureBond adhesion process\u003c\/li\u003e\n\u003cli\u003eXP bearings feature a 15%-30% greater load capacity than traditional bearings and a 0.0005 inch metallurgically enhanced and hardened performance overlay for extended fatigue resistance\u003c\/li\u003e\n\u003cli\u003eAll King bearings are designed with the closest wall tolerances in the industry, with all shells matched to 0.0001 inch\u003c\/li\u003e\n\u003cli\u003eGreater bearing height improves bearing-to-bore contact and heat transfer, reducing spin potential at high RPM\u003c\/li\u003e\n\u003cli\u003eEnlarged and chamfered oil holes for equal distribution under heavy load\u003c\/li\u003e\n\u003cli\u003eReplacing the rod bearings is recommended when doing rods and pistons; proper support via the bearings helps prevent fatigue and failure and reduces drivetrain stress\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePart numbers: CR4586XP (Size STD), CR4586XPSTDX, CR4586XP.026, CR4586XP0.25\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eEngine bearings require proper tolerance to be measured before purchase. If you are not sure what size bearings your build requires, please consult a professional engine builder.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this fit my 2008-2015 Mitsubishi EVO X?\u003c\/strong\u003e\u003cbr\u003eA: Yes. This rod bearing set is for the 2008-2015 Mitsubishi EVO X; confirm the part number CR4586XP and your measured size before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: One connecting rod bearing set in the size selected. Main bearings are not included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How do I choose the right bearing size?\u003c\/strong\u003e\u003cbr\u003eA: Engine bearings require proper tolerance to be measured before purchase. Measure your crankshaft journals and confirm the size designation of the variant before ordering, and consult a professional engine builder if you are not sure.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"King Engine Bearings","offers":[{"title":"Size STD","offer_id":31524447354982,"sku":"CR4586XP","price":52.0,"currency_code":"USD","in_stock":true},{"title":"Size STDX -.0005in","offer_id":31524447387750,"sku":"CR4586XPSTDX","price":62.0,"currency_code":"USD","in_stock":false},{"title":"Size .025","offer_id":31524447420518,"sku":"CR4586XP.026","price":54.0,"currency_code":"USD","in_stock":false},{"title":"Size 0.25","offer_id":31524447453286,"sku":"CR4586XP0.25","price":62.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/king-performance-rod-bearing-set-mitsubishi-evo-x-2008-2015-main-bearings-king-engine-bearings-size-std-cr4586xp.jpg?v=1614540554"},{"product_id":"gsc-power-division-stage-1-camshafts-mitsubishi-evolution-x","title":"GSC Power Division [08-15 EVO X] Stage 1 Camshafts","description":"\u003cp\u003eThe GSC Power Division Stage 1 Camshafts are billet S1 camshafts for the Mitsubishi Evolution X, designed for the stock turbo up to the 550hp range. The manufacturer states these cams will not sacrifice any bottom end power over stock cams and promote faster spooling of upgraded turbos, with gains of 20-50whp depending on the turbo seen by simply bolting the S1 cams in.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eForged billet core S1 camshaft set for the Evolution X\u003c\/li\u003e\n\u003cli\u003eDesigned for the stock turbo up to the 550hp range\u003c\/li\u003e\n\u003cli\u003eDesigned for a rev range of 3000-7500 RPM\u003c\/li\u003e\n\u003cli\u003eIntake: 264 advertised duration, 220 duration @ 1mm, 10.20mm peak lift\u003c\/li\u003e\n\u003cli\u003eExhaust: 264 advertised duration, 216 duration @ 1mm, 10.00mm peak lift\u003c\/li\u003e\n\u003cli\u003eWorks well on the stock valve springs\u003c\/li\u003e\n\u003cli\u003ePart Number: 7010S1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQ\u0026amp;A\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my car?\u003c\/strong\u003e\u003cbr\u003eThis camshaft set is listed for the 2008-2015 Mitsubishi Evolution X; verify fitment before purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need upgraded valve springs?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states the S1 cams work well on the stock valve springs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gains can be expected?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states gains of 20-50whp, depending on the turbo, have been seen by simply bolting the S1 cams in.\u003c\/p\u003e","brand":"GSC Power Division","offers":[{"title":"Default Title","offer_id":31548349579366,"sku":"7010S1","price":658.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/gsc-power-division-stage-1-camshafts-mitsubishi-evolution-x-cams-gsc-power-division-7010s1.jpg?v=1614541887"},{"product_id":"gsc-beehive-valve-springs-retainers-mitsubishi-evolution-x","title":"GSC Power Division [08-15 EVO X] Beehive Valve Springs \u0026 Retainers","description":"\u003cp\u003eThe GSC Power Division Beehive Valve Springs \u0026amp; Retainers for the Mitsubishi Evolution X use an ovate wire with advanced material heat treatment methods for superior load loss capabilities, giving the highest level of spring load retention while maintaining good fatigue throughout the life of the spring. The retainer side of the valve springs has a smaller diameter to greatly reduce coil spring surging and improve valve control even at extreme RPM levels, and each new design is tested to 9,000 RPM.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBeehive valve springs with ovate wire construction\u003c\/li\u003e\n\u003cli\u003eAdvanced material heat treatment for superior load loss capabilities\u003c\/li\u003e\n\u003cli\u003eSmaller retainer-side diameter reduces coil spring surging and improves valve control\u003c\/li\u003e\n\u003cli\u003eTested to 9,000 RPM\u003c\/li\u003e\n\u003cli\u003eIncludes 16 valve springs and titanium retainers\u003c\/li\u003e\n\u003cli\u003eFactory seats are reused\u003c\/li\u003e\n\u003cli\u003ePart Number: 5042\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQ\u0026amp;A\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my car?\u003c\/strong\u003e\u003cbr\u003eThis spring and retainer set is listed for the 2008-2015 Mitsubishi Evolution X; verify fitment before purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e\u003cbr\u003eThe set includes 16 valve springs and titanium retainers; factory seats are reused.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat RPM are these springs tested to?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states each new design is tested to 9,000 RPM.\u003c\/p\u003e","brand":"GSC Power Division","offers":[{"title":"Default Title","offer_id":31548349612134,"sku":"5042","price":386.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/gsc-beehive-valve-springs-retainers-mitsubishi-evolution-x-valve-springs-gsc-power-division-5042.jpg?v=1614541887"},{"product_id":"gsc-power-division-s-series-stage-2-cams-mitsubishi-evolution-x","title":"GSC Power Division [08-15 EVO X] Stage 2 Camshafts","description":"\u003cp\u003eThe GSC Power Division Stage 2 Camshafts are S2 billet camshafts for the 2008-2015 Mitsubishi Lancer Evolution X, designed for those with 600HP+ in mind. The manufacturer states gains of 40-80whp, depending on the turbo, have been seen by simply bolting the S2 cams in.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBillet S2 camshaft set for the Evolution X\u003c\/li\u003e\n\u003cli\u003eDesigned for a rev range of 3800-8500 RPM\u003c\/li\u003e\n\u003cli\u003eIntake: 274 advertised duration, 230 duration at 1mm, 11.20mm peak lift\u003c\/li\u003e\n\u003cli\u003eExhaust: 274 advertised duration, 230 duration at 1mm, 11.00mm peak lift\u003c\/li\u003e\n\u003cli\u003eUpgraded valve springs are required\u003c\/li\u003e\n\u003cli\u003ePart Number: 7010S2\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eQ\u0026amp;A\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my car?\u003c\/strong\u003e\u003cbr\u003eThis camshaft set is listed for the 2008-2015 Mitsubishi Lancer Evolution X; verify fitment before purchase.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre upgraded valve springs required?\u003c\/strong\u003e\u003cbr\u003eYes. The manufacturer states the S2 cams require an upgraded valve spring.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat gains can be expected?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states gains of 40-80whp, depending on the turbo, have been seen by simply bolting the S2 cams in.\u003c\/p\u003e","brand":"GSC Power Division","offers":[{"title":"Default Title","offer_id":31548351217766,"sku":"7010S2","price":658.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/gsc-power-division-s-series-stage-2-cams-mitsubishi-evolution-x-camshafts-and-gears-gsc-power-division-7010s2.jpg?v=1614541904"},{"product_id":"hks-2-2l-stroker-kit-mitsubishi-evo-x","title":"HKS [08-16 Lancer Evolution X, 08-15 Lancer Ralliart, 10-17 Lancer Sportback] 2.2L Stroker Kit","description":"\u003cp\u003eThe HKS 2.2L Stroker Kit is an engine stroker kit for the Mitsubishi Lancer Evolution X with the 4B11 engine. The kit includes an HKS stroker crank, HKS pistons and HKS rods.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eForged pistons and rings\u003c\/li\u003e\n\u003cli\u003eRods\u003c\/li\u003e\n\u003cli\u003eCrank and I-Beam conrods\u003c\/li\u003e\n\u003cli\u003eFitment: Mitsubishi Lancer Evolution MR and Evolution GSR 2008-2015, 4B11\u003c\/li\u003e\n\u003cli\u003ePart Number: 21004-AM003\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eQ: Does this fit my Mitsubishi Lancer Evolution X?\u003c\/b\u003e A: This stroker kit is listed for the Mitsubishi Lancer Evolution MR and Evolution GSR 2008-2015 with the 4B11 engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eQ: What is included in the box?\u003c\/b\u003e A: The kit includes forged pistons and rings, rods, and a crank with I-Beam conrods.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HKS","offers":[{"title":"Default Title","offer_id":31548430975078,"sku":"hks21004-AM003","price":3740.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/hks-22l-stroker-kit-mitsubishi-evo-x-21004-am003-crankshafts-hks-hks21004-am003.jpg?v=1614542080"},{"product_id":"wiseco-sport-compact-4-5cc-pistons-2008-2015-mitsubishi-evo-x-4b11t-k636m","title":"Wiseco [08-15 Mitsubishi Evolution 10] 4B11T Evo X Forged Pistons","description":"\u003cp\u003eThe Wiseco Sport Compact Forged Piston Kit for the 2008-2015 Mitsubishi Lancer Evolution X with the 4B11T engine is a forged piston kit for engine builds. Wiseco pistons feature valve pocket designs that allow maximum flow around the valve and allow oversized valves and high lift cams to be utilized, and piston crown shapes designed to promote maximum intake charge efficiency through scavenging mixture cross flow during intake and exhaust valve overlap.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart numbers: K636M86, K636M865, K636M87, K636M88\u003c\/li\u003e\n\u003cli\u003eEngine: Mitsubishi 4B11T\u003c\/li\u003e\n\u003cli\u003eApplication: 2008-2015 Mitsubishi Lancer Evolution X\u003c\/li\u003e\n\u003cli\u003eBore options: 86.00mm (9.2 compression ratio), 86.50mm (9.3 compression ratio), 87.00mm (9.4 compression ratio), 88.00mm (9.6 compression ratio)\u003c\/li\u003e\n\u003cli\u003eStroke: 3.386\" (86mm)\u003c\/li\u003e\n\u003cli\u003eRod: 5.659 (143.75mm)\u003c\/li\u003e\n\u003cli\u003eCompression height: 1.309 (33.25mm)\u003c\/li\u003e\n\u003cli\u003eHead cc's: 49.0\u003c\/li\u003e\n\u003cli\u003eVolume: -4.5cc\u003c\/li\u003e\n\u003cli\u003eGasket thickness: .048 (1.2mm)\u003c\/li\u003e\n\u003cli\u003eDeck clearance: 0\u003c\/li\u003e\n\u003cli\u003eBlock height: 8.661 (220mm)\u003c\/li\u003e\n\u003cli\u003e2618 Aerospace Alloy for superior strength to weight ratio\u003c\/li\u003e\n\u003cli\u003eArmorGlide skirt coating increases power and reduces piston rock\u003c\/li\u003e\n\u003cli\u003eStrutted forging for improved strength\u003c\/li\u003e\n\u003cli\u003eResistance to detonation and pre-ignition\u003c\/li\u003e\n\u003cli\u003eMaximum ring seal minimizes blow-by and oil consumption\u003c\/li\u003e\n\u003cli\u003eOil squirter modification required\u003c\/li\u003e\n\u003cli\u003eMost Wiseco pistons have offset pins. Pins must be offset, same as OEM, for quietest operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my 2008-2015 Mitsubishi Lancer Evolution X?\u003c\/strong\u003e\u003cbr\u003eThis Wiseco Sport Compact piston kit is made for the 2008-2015 Mitsubishi Lancer Evolution X with the 4B11T engine. Verify the bore size against your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e\u003cbr\u003eOne Sport Compact Series piston kit with piston pins and rings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat bore sizes and compression ratios are available?\u003c\/strong\u003e\u003cbr\u003eBore options are 86.00mm with a 9.2 compression ratio, 86.50mm with a 9.3 compression ratio, 87.00mm with a 9.4 compression ratio, and 88.00mm with a 9.6 compression ratio. The compression height is 1.309 (33.25mm) and the volume is -4.5cc.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs any modification required?\u003c\/strong\u003e\u003cbr\u003eOil squirter modification is required. Most Wiseco pistons have offset pins, and the pins must be offset, same as OEM, for quietest operation.\u003c\/p\u003e","brand":"Wiseco","offers":[{"title":"86.00mm (Std) | 9.2 Compression Ratio","offer_id":31902170218598,"sku":"wisK636M86","price":722.99,"currency_code":"USD","in_stock":true},{"title":"87.00mm (1.00mm Oversize) | 9.4 Compression Ratio","offer_id":31902170251366,"sku":"wisK636M87","price":722.99,"currency_code":"USD","in_stock":true},{"title":"88.00mm (2.00mm Oversize) | 9.6 Compression Ratio","offer_id":31902170284134,"sku":"wisK636M88","price":722.99,"currency_code":"USD","in_stock":true},{"title":"86.50 (0.50mm Oversize) | 9.3 Compression Ratio","offer_id":31902170316902,"sku":"wisK636M865","price":722.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/wiseco-4b11t-evo-x-forged-pistons-08-15-mitsubishi-evolution-10-k636m-engine-internals-assemblies-wiseco.jpg?v=1614551460"},{"product_id":"wiseco-boostline-connecting-rod-single-2008-2015-mitsubishi-evo-x-4b11t-mi5657-905s","title":"Wiseco [08-15 Mitsubishi Evo X 4B11T] BoostLine Connecting Rod - Single","description":"\u003cp\u003eThe Wiseco BoostLine Connecting Rod for the 2008-2015 Mitsubishi Evo X 4B11T is a single forged connecting rod built for demanding high-horsepower applications. BoostLine connecting rods use a patented 3-pocket design made specifically for demanding high-horsepower nitrous-fed engines, with 60% more bending strength than the common H-beam. Price is for one (1) connecting rod.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned specifically for high-horsepower nitrous-fed applications\u003c\/li\u003e\n\u003cli\u003e60% increase in bending strength vs. H-beam rods\u003c\/li\u003e\n\u003cli\u003ePatented high-strength 3-pocket design\u003c\/li\u003e\n\u003cli\u003eMachined from premium 4340 forged steel\u003c\/li\u003e\n\u003cli\u003eComes standard with ARP 2000 bolts included, or upgrade to Custom Age 625+ bolts depending on variant selected\u003c\/li\u003e\n\u003cli\u003eInspected and finished in the USA (Mentor, Ohio)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: MI5657-905S\u003c\/li\u003e\n\u003cli\u003eEngine: Mitsubishi 4B11T\u003c\/li\u003e\n\u003cli\u003eLength: 143.7mm\u003c\/li\u003e\n\u003cli\u003ePin diameter: 23mm\u003c\/li\u003e\n\u003cli\u003ePE width: 19.860\u003c\/li\u003e\n\u003cli\u003eBE width: 21.870\u003c\/li\u003e\n\u003cli\u003eHousing bore: 55.005\u003c\/li\u003e\n\u003cli\u003eBolt size: 3\/8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ: What vehicle does this BoostLine rod fit?\u003c\/strong\u003e\u003cbr\u003eA: This rod fits the 2008-2015 Mitsubishi Evo X with the 4B11T engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: How many rods are included?\u003c\/strong\u003e\u003cbr\u003eA: The price is for one (1) BoostLine connecting rod.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What bolts are included?\u003c\/strong\u003e\u003cbr\u003eA: The rod comes standard with ARP 2000 bolts included, with a Custom Age 625+ bolt upgrade available on the corresponding variant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What material is this rod made from?\u003c\/strong\u003e\u003cbr\u003eA: This rod is machined from premium 4340 forged steel.\u003c\/p\u003e","brand":"Wiseco","offers":[{"title":"ARP 2000 Bolts","offer_id":31902183489638,"sku":"wisMI5657-905S","price":274.99,"currency_code":"USD","in_stock":true},{"title":"ARP 625+ Bolts","offer_id":31902183522406,"sku":"wisMI5657-905S+","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/wiseco-boostline-connecting-rod-single-2008-2015-mitsubishi-evo-x-4b11t-mi5657-905s-engine-internals-assemblies-wiseco.jpg?v=1614551637"},{"product_id":"wiseco-boostline-connecting-rod-kit-2008-2015-mitsubishi-evo-x-4b11t-mi5657-905","title":"Wiseco [08-15 Mitsubishi Evo X 4B11T] BoostLine Connecting Rod Kit","description":"\u003cp\u003eThe Wiseco BoostLine Connecting Rod Kit for the 2008-2015 Mitsubishi Lancer Evolution X 4B11T is a connecting rod kit built for demanding high-horsepower applications. BoostLine connecting rods use a patented 3-pocket design made specifically for demanding high-horsepower nitrous-fed engines, with 60% more bending strength than the common H-beam.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned specifically for high-horsepower nitrous-fed applications\u003c\/li\u003e\n\u003cli\u003e60% increase in bending strength vs. H-beam rods\u003c\/li\u003e\n\u003cli\u003ePatented high-strength 3-pocket design\u003c\/li\u003e\n\u003cli\u003eMachined from premium 4340 forged steel\u003c\/li\u003e\n\u003cli\u003eComes standard with ARP 2000 bolts included, or upgrade to Custom Age 625+ bolts depending on variant selected\u003c\/li\u003e\n\u003cli\u003eInspected and finished in the USA (Mentor, Ohio)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: MI5657-905\u003c\/li\u003e\n\u003cli\u003eEngine: Mitsubishi 4B11T\u003c\/li\u003e\n\u003cli\u003eLength: 143.7mm\u003c\/li\u003e\n\u003cli\u003ePin diameter: 23mm\u003c\/li\u003e\n\u003cli\u003ePE width: 19.860\u003c\/li\u003e\n\u003cli\u003eBE width: 21.870\u003c\/li\u003e\n\u003cli\u003eHousing bore: 55.005\u003c\/li\u003e\n\u003cli\u003eBolt size: 3\/8\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ: What engine does this BoostLine rod kit fit?\u003c\/strong\u003e\u003cbr\u003eA: This kit is for the Mitsubishi 4B11T engine in the 2008-2015 Lancer Evolution X. Confirm length, pin diameter, and housing bore for your build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The box contains 1 Wiseco BoostLine connecting rod kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What bolts are included?\u003c\/strong\u003e\u003cbr\u003eA: The kit comes standard with ARP 2000 bolts included, with a Custom Age 625+ bolt upgrade available on the corresponding variant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What material are these rods made from?\u003c\/strong\u003e\u003cbr\u003eA: They are machined from premium 4340 forged steel.\u003c\/p\u003e","brand":"Wiseco","offers":[{"title":"ARP 2000 Bolts","offer_id":31902193778790,"sku":"wisMI5657-905","price":799.99,"currency_code":"USD","in_stock":true},{"title":"ARP 625+ Bolts","offer_id":31902193811558,"sku":"wisMI5657-905+","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/wiseco-boostline-connecting-rod-kit-2008-2015-mitsubishi-evo-x-4b11t-mi5657-905-engine-internals-assemblies-wiseco.jpg?v=1614551787"},{"product_id":"ferrea-mitsubishi-lancer-evolution-x-spring-seat-locator-sl1096","title":"Ferrea [EVO X] Spring Seat Locator","description":"\u003cp\u003eThis Ferrea spring seat locator is required for Ferrea springs S10118. It is listed for the Mitsubishi Evolution X 2.0L DOHC 16-valve (4B11T) and the Hyundai Genesis 2.0L DOHC 16-valve (Turbo Bk) 2008-2010 applications.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: SL1096\u003c\/li\u003e\n\u003cli\u003eApplication: Mitsubishi Evolution X 2.0L - DOHC 16 Valve (4B11T) - 2007-2015\u003c\/li\u003e\n\u003cli\u003eApplication: Hyundai Genesis 2.0L - DOHC 16 Valve (Turbo Bk) - 2008-2010\u003c\/li\u003e\n\u003cli\u003eRequired for Ferrea springs S10118\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the Ferrea SL1096 fit my Mitsubishi Evolution X?\u003c\/strong\u003e Yes. It is listed for the Evolution X 2.0L DOHC 16-valve (4B11T) application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhich Ferrea springs require the SL1096?\u003c\/strong\u003e The SL1096 spring seat locator is required for Ferrea springs S10118.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the Ferrea SL1096 fit any other application?\u003c\/strong\u003e Yes. It is also listed for the Hyundai Genesis 2.0L DOHC 16-valve (Turbo Bk) 2008-2010.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ferrea Racing","offers":[{"title":"Default Title","offer_id":32012096536678,"sku":"ferSL1096","price":104.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/ferrea-mitsubishi-lancer-evolution-x-spring-seat-locator-sl1096-valvetrain-components-ferrea-racing-fersl1096.jpg?v=1614553377"},{"product_id":"ferrea-6000-series-stock-size-exhaust-valves-2008-2015-mitsubishi-evo-x-f6292","title":"Ferrea 6000 Series Stock Size Exhaust Valves | 2008-2015 Mitsubishi Evo X","description":"\u003cp\u003eThe Ferrea 6000 Series stock size exhaust valve (part F6292) is an individual exhaust valve for the 2008-2015 Mitsubishi Evo X. The 6000 Series Competition Valves are designed to provide excellent reliability in an environment of high spring pressures and roller cams, at a budget price. They have higher fatigue resistance and tensile strengths than our competitor's best offerings. To manufacture the valves we use our exclusive two-step slow forging process using EV8 stainless steel on both intake and exhaust valves. We provide a special heat-treatment and stress relieving process, along with hard chrome stems and friction-welded hard tips. We finish with a swirl polished head. The valves feature flow improvements to deliver the power needed for today's sophisticated racing engines.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: F6292\u003c\/li\u003e\n\u003cli\u003eValve type: Exhaust\u003c\/li\u003e\n\u003cli\u003eHead diameter: 29 mm\u003c\/li\u003e\n\u003cli\u003eStem diameter: 5.46 mm\u003c\/li\u003e\n\u003cli\u003eOverall length: 105.90 mm\u003c\/li\u003e\n\u003cli\u003eTip length: 2.32 mm\u003c\/li\u003e\n\u003cli\u003eReference: 25° Flo. Stock size. Single Groove. Special Alloy\u003c\/li\u003e\n\u003cli\u003eApplications: 2008-2015 Mitsubishi Evo X (4B11T)\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 individual exhaust valve (sold as individual valves)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the Ferrea F6292 fit my Mitsubishi Evo X?\u003c\/strong\u003e It is the stock size 6000 Series exhaust valve listed for the 2008-2015 Mitsubishi Evo X, with a 29 mm head diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The package contains 1 Ferrea 6000 Series exhaust valve. Use the quantity selector if more than 1 is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat are the exact dimensions of the F6292?\u003c\/strong\u003e Head diameter 29 mm, stem diameter 5.46 mm, overall length 105.90 mm and tip length 2.32 mm, with a 25° Flo, stock size, Single Groove, Special Alloy reference.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ferrea Racing","offers":[{"title":"Default Title","offer_id":32012098338918,"sku":"ferF6292","price":175.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/ferrea-6000-series-stock-size-exhaust-valves-2008-2015-mitsubishi-evo-x-f6292-valves-ferrea-racing-ferf6292.jpg?v=1614553410"},{"product_id":"ferrea-dual-valve-spring-kit-2008-2015-mitsubishi-evolution-x-kt4014","title":"Ferrea [08-15 Mitsubishi Lancer Evolution X] Dual Valve Spring Kit","description":"\u003cp\u003eThe Ferrea Dual Valve Spring Kit for the 2008-2015 Mitsubishi Lancer Evolution X 4B11T controls harmonics and high frequency fatigue in racing engines. Harmonics or high frequency fatigue is present in all racing engines and will usually destroy the valvetrain if not controlled. Properly designed valve springs will control the dominant harmonics, provide the needed stability, and reduce valvetrain component wear. Ferrea valve springs are developed from high strength alloys, including premium grade chrome silicon steel. These springs are heat-treated and stress relieved, which dramatically increases the spring's life. Ferrea valve springs provide the stability needed for high lift, high rpm racing engines, while minimizing the load loss for today's aggressive valvetrain combinations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: KT4014\u003c\/li\u003e\n\u003cli\u003e16 dual valve springs (S10118)\u003c\/li\u003e\n\u003cli\u003e16 titanium retainers (E11089)\u003c\/li\u003e\n\u003cli\u003e16 seat locators (SL1096)\u003c\/li\u003e\n\u003cli\u003e16 valve locks (K10091)\u003c\/li\u003e\n\u003cli\u003eSpring: Dual Spring - Endurance, Special Alloy\u003c\/li\u003e\n\u003cli\u003eSeat pressure: 75 lbs @ 36 mm\u003c\/li\u003e\n\u003cli\u003eOpen pressure: 175 lbs @ 26 mm\u003c\/li\u003e\n\u003cli\u003eRate: 254 lbs per inch\u003c\/li\u003e\n\u003cli\u003eMax net lift: 12 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this kit fit my Evolution X?\u003c\/strong\u003e It fits the 2008-2015 Mitsubishi Lancer Evolution X with the 4B11T engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes 16 dual valve springs (S10118), 16 titanium retainers (E11089), 16 seat locators (SL1096) and 16 valve locks (K10091).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat are the spring pressures?\u003c\/strong\u003e Seat pressure is 75 lbs @ 36 mm and open pressure is 175 lbs @ 26 mm, with a rate of 254 lbs per inch and a max net lift of 12 mm.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ferrea Racing","offers":[{"title":"Default Title","offer_id":32012098863206,"sku":"ferKT4014","price":1041.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/ferrea-dual-valve-spring-kit-2008-2015-mitsubishi-evolution-x-kt4014-valve-springs-ferrea-racing-ferkt4014.jpg?v=1614553416"},{"product_id":"ferrea-dual-valve-spring-kit-mitsubishi-evo-x-4b11t","title":"Ferrea [08-15 Mitsubishi Lancer Evolution X] Dual Valve Spring Kit","description":"\u003cp\u003eThe Ferrea Dual Valve Spring Kit for the 2008-2015 Mitsubishi Lancer Evolution X 4B11T controls harmonics and high frequency fatigue in racing engines. Harmonics or high frequency fatigue is present in all racing engines and will usually destroy the valvetrain if not controlled. Properly designed valve springs will control the dominant harmonics, provide the needed stability, and reduce valvetrain component wear. Ferrea valve springs are developed from high strength alloys, including premium grade chrome silicon steel. These springs are heat-treated and stress relieved, which dramatically increases the spring's life. Ferrea valve springs provide the stability needed for high lift, high rpm racing engines, while minimizing the load loss for today's aggressive valvetrain combinations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: KT4014\u003c\/li\u003e\n\u003cli\u003e16 dual valve springs (S10118)\u003c\/li\u003e\n\u003cli\u003e16 titanium retainers (E11089)\u003c\/li\u003e\n\u003cli\u003e16 seat locators (SL1096)\u003c\/li\u003e\n\u003cli\u003e16 valve locks (K10091)\u003c\/li\u003e\n\u003cli\u003eSpring: Dual Spring - Endurance, Special Alloy\u003c\/li\u003e\n\u003cli\u003eSeat pressure: 75 lbs @ 36 mm\u003c\/li\u003e\n\u003cli\u003eOpen pressure: 175 lbs @ 26 mm\u003c\/li\u003e\n\u003cli\u003eRate: 254 lbs per inch\u003c\/li\u003e\n\u003cli\u003eMax net lift: 12 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this kit fit my Evolution X?\u003c\/strong\u003e It fits the 2008-2015 Mitsubishi Lancer Evolution X with the 4B11T engine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes 16 dual valve springs (S10118), 16 titanium retainers (E11089), 16 seat locators (SL1096) and 16 valve locks (K10091).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat are the spring pressures?\u003c\/strong\u003e Seat pressure is 75 lbs @ 36 mm and open pressure is 175 lbs @ 26 mm, with a rate of 254 lbs per inch and a max net lift of 12 mm.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ferrea Racing","offers":[{"title":"Default Title","offer_id":32012099551334,"sku":"ferKT4014","price":1041.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/ferrea-dual-valve-spring-kit-mitsubishi-evo-x-4b11t-valve-springs-ferrea-racing-ferkt4014.jpg?v=1614553427"},{"product_id":"ferrea-competition-plus-1mm-single-exhaust-valve-2008-2015-mitsubishi-evo-x-4b11t-f2174p","title":"Ferrea [08-15 Mitsubishi EVO X 4B11T] Competition Plus Individual Exhaust Valve 1mm Oversize","description":"\u003cp\u003eThe Ferrea Competition Plus Individual Exhaust Valve 1mm Oversize for the 2008-2015 Mitsubishi EVO X 4B11T to manufacture the valves we use special aerospace quality alloys, including the EV8-Z18, which provides high tensile strength. An exclusive two-step slow forging process ensures proper grain flow and virtually eliminates any damage to the material structure. The valves are then heat-treated and stress-relieved over a 48-hour period, which is the crucial base of our molecular integrity. These valves feature avionics-quality hard chrome along with a specially applied hard tip. Our engineering staff at Ferrea spends countless hours conducting flow bench tests to achieve an optimum balance of flow, velocity and efficiency in the design of this valve. As a result, these valves incorporate smoother radius and unique undercuts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: F2174P\u003c\/li\u003e\n\u003cli\u003eHead diameter: 30mm\u003c\/li\u003e\n\u003cli\u003eStem diameter: 5.46mm\u003c\/li\u003e\n\u003cli\u003eOverall length: 105.9mm\u003c\/li\u003e\n\u003cli\u003eTip length: 2.32mm\u003c\/li\u003e\n\u003cli\u003eReference: 25° Flo. + 1 mm oversize. Single Groove. Super Alloy\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 exhaust valve\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this valve fit my EVO X?\u003c\/strong\u003e It fits the 2008-2015 Mitsubishi Lancer Evolution X 4B11T. It is a 1mm oversize exhaust valve, so confirm your cylinder head machining before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e One individual exhaust valve is included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat are the valve dimensions?\u003c\/strong\u003e The head diameter is 30mm, the stem diameter is 5.46mm, the overall length is 105.9mm and the tip length is 2.32mm.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ferrea Racing","offers":[{"title":"Default Title","offer_id":32012100436070,"sku":"ferF2174P","price":337.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/ferrea-competition-plus-1mm-single-exhaust-valve-2008-2015-mitsubishi-evo-x-4b11t-f2174p-valves-ferrea-racing-ferf2174p.jpg?v=1614553439"},{"product_id":"ferrea-competition-plus-1mm-single-intake-valve-2008-2015-mitsubishi-evo-x-4b11t-f2176p","title":"Ferrea [08-15 EVO X] Competition Plus +1mm Intake Valve","description":"\u003cp\u003eThis Ferrea Competition Plus +1mm intake valve for the 2008-2015 Mitsubishi Lancer Evolution X (4B11T) is manufactured from special aerospace quality alloys, including EV8-Z18, which provides high tensile strength. An exclusive two-step slow forging process ensures proper grain flow and virtually eliminates any damage to the material structure. The valves are then heat treated and stress-relieved over a 48-hour period, feature avionics-quality hard chrome along with a specially applied hard tip, and incorporate smoother radius and unique undercuts from flow bench testing to achieve an optimum balance of flow, velocity and efficiency.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: F2176P\u003c\/li\u003e\n\u003cli\u003eFitment: 2008-2015 Mitsubishi Lancer Evolution X 4B11T\u003c\/li\u003e\n\u003cli\u003eHead Diameter: 36mm\u003c\/li\u003e\n\u003cli\u003eStem Diameter: 5.47mm\u003c\/li\u003e\n\u003cli\u003eOverall Length: 113.25mm\u003c\/li\u003e\n\u003cli\u003eTip Length: 4.24mm\u003c\/li\u003e\n\u003cli\u003eWhat's in the box: 1 individual intake valve\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my 2008-2015 Mitsubishi Evo X?\u003c\/strong\u003e\u003cbr\u003eYes. This Ferrea Competition Plus intake valve is listed for the 2008-2015 Mitsubishi Lancer Evolution X with the 4B11T engine, and it is a +1mm valve with a 36mm head diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's in the box?\u003c\/strong\u003e\u003cbr\u003eThe box contains 1 individual intake valve.\u003c\/p\u003e","brand":"Ferrea Racing","offers":[{"title":"Default Title","offer_id":32012100665446,"sku":"ferF2176P","price":241.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/ferrea-competition-plus-1mm-single-intake-valve-2008-2015-mitsubishi-evo-x-4b11t-f2176p-valves-ferrea-racing-ferf2176p.jpg?v=1614553445"}],"url":"https:\/\/jdmuscleusa.com\/collections\/2008-2015-mitsubishi-evo-x-engine-builds.oembed","provider":"JDMuscle","version":"1.0","type":"link"}