{"title":"2003-2005 Mitsubishi EVO 8 Suspension","description":"\u003cp\u003eShop suspension parts and upgrades for the 2003-2005 Mitsubishi EVO 8. You'll find coilovers, arms, bushings, and chassis bracing listed for 2003-2005 EVO 8 fitment, from daily-driver improvements to more focused build parts. JDMuscle carries established performance brands so you can shop this generation with confidence.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShop related\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/mitsubishi-evo-8\"\u003e03-05 EVO 8\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2003-2005-mitsubishi-evo-8-suspension-height-adjustment\"\u003e03-05 EVO 8 Suspension Height Adjustment\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2003-2005-mitsubishi-evo-8-suspension-linkage\"\u003e03-05 EVO 8 Suspension Linkage\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2003-2005-mitsubishi-evo-8-suspension-bushings\"\u003e03-05 EVO 8 Suspension Bushings\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2003-2005-mitsubishi-evo-8-engine\"\u003e03-05 EVO 8 Engine\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2003-2005-mitsubishi-evo-8-drivetrain\"\u003e03-05 EVO 8 Drivetrain\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2003-2005-mitsubishi-evo-8-exterior\"\u003e03-05 EVO 8 Exterior\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2003-2005-mitsubishi-evo-8-brakes\"\u003e03-05 EVO 8 Brakes\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2003-2005-mitsubishi-evo-8-interior\"\u003e03-05 EVO 8 Interior\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"cusco-pillowball-front-lower-arm-bushing-rear-side-mitsubishi-evo-8-9-2003-2006","title":"Cusco [03-06 EVO 8\/9] Pillowball Front Lower Arm Bushing - Rear Side","description":"\u003cp\u003eThe Cusco Pillowball Front Lower Arm Bushing is a pillowball-type bushing kit for the rear-side position of the front lower arm on the Mitsubishi Lancer Evolution 8 and 9 (CT9A). It replaces the factory rubber bushing with a pillowball for more direct suspension response, and the kit comes with dust rubber boots.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePillowball-type front lower arm bushing kit - rear-side position\u003c\/li\u003e\n\u003cli\u003eFits 2003-2006 Mitsubishi Lancer Evolution 8\/9 (CT9A)\u003c\/li\u003e\n\u003cli\u003eReplaces the factory rubber bushing for improved handling precision and steering response\u003c\/li\u003e\n\u003cli\u003eComes with dust rubber boots\u003c\/li\u003e\n\u003cli\u003eCusco part 564 464 CV\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31100994060390,"sku":"cus564 464 CV","price":558.0,"currency_code":"USD","in_stock":true}]},{"product_id":"cusco-pillowball-rear-trailing-arm-bushings-mitsubishi-evo-8-9-2003-2006","title":"Cusco [03-06 EVO 8\/9] Pillowball Rear Trailing Arm Bushings","description":"\u003cp\u003eThe Cusco Pillowball Rear Trailing Arm Bushing kit replaces the factory rubber trailing arm bushings on the Mitsubishi Lancer Evolution 8 and 9 (CT9A) with pillowball-type bushings for more precise suspension response. The kit comes with dust rubber boots.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePillowball-type rear trailing arm bushing kit\u003c\/li\u003e\n\u003cli\u003eFits 2003-2006 Mitsubishi Lancer Evolution 8\/9 (CT9A)\u003c\/li\u003e\n\u003cli\u003eReplaces factory rubber bushings for improved handling precision\u003c\/li\u003e\n\u003cli\u003eComes with dust rubber boots\u003c\/li\u003e\n\u003cli\u003eCusco part 560 464 EV\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31100994158694,"sku":"cus560 464 EV","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-pillowball-rear-trailing-arm-bushings-mitsubishi-evo-8-9-2003-2006-aftermarket-bushings-cusco-cus560-464-ev.jpg?v=1614512126"},{"product_id":"cusco-front-lower-bar-type-ii-mitsubishi-evo-8-9-2003-2009","title":"Cusco [03-07 EVO 8 \/ 9] Front Lower Bar Type II Mitsubishi","description":"\u003cp\u003eThe Cusco Front Lower Bar Type II is a multi-point chassis brace for the front of the Mitsubishi Lancer Evolution 8 and 9 (CT9A). Sharing the Type I bar's tubular high-tension design and anti-corrosion paint, the Type II connects the lower arm mounts in multiple positions rather than just two, greatly increasing rigidity over the 2-point Type I style and maintaining body rigidity under hard cornering. It includes all required installation hardware and bolts on using normal hand tools.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType II front lower bar - multi-point chassis brace\u003c\/li\u003e\n\u003cli\u003eFits 2003-2006 Mitsubishi Lancer Evolution 8\/9 (CT9A)\u003c\/li\u003e\n\u003cli\u003eConnects lower arm mounts in multiple positions for greatly increased rigidity over the Type I style\u003c\/li\u003e\n\u003cli\u003eMaintains body rigidity under hard cornering\u003c\/li\u003e\n\u003cli\u003eImproves steering rigidity, response, and traction\u003c\/li\u003e\n\u003cli\u003eAnti-corrosion paint finish\u003c\/li\u003e\n\u003cli\u003eAll installation hardware included; bolts on with normal hand tools\u003c\/li\u003e\n\u003cli\u003eCusco part 564 477 A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31100994256998,"sku":"cus564 477 A","price":220.5,"currency_code":"USD","in_stock":true}]},{"product_id":"cusco-front-lower-bar-type-i-mitsubishi-evo-8-9-2003-2009","title":"Cusco [01-02 EVO 7, 03-05 EVO 8, 05-07 EVO 9] Front Lower Arm Bar Type I","description":"\u003cp\u003eThe Cusco Type I front lower arm bar is a 2-point chassis brace constructed of high-tension lightweight tubular aluminum, coated in anti-corrosive Cusco blue paint. It bolts to the lower arm in two places to improve chassis rigidity and reduce body flex, dramatically improving steering rigidity, response, and traction. It bolts on easily with normal hand tools and can be used together with the Type II lower arm bar.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCusco part number 564 475 A — Front Lower Arm Bar Type I\u003c\/li\u003e\n\u003cli\u003eFits Mitsubishi Lancer Evolution VII (2001-2002), Evolution VIII (2003-2005), Evolution IX (2005-2007) — CT9A chassis\u003c\/li\u003e\n\u003cli\u003eHigh-tension lightweight tubular aluminum construction\u003c\/li\u003e\n\u003cli\u003e2-point design — bolts to the lower arm in two places\u003c\/li\u003e\n\u003cli\u003eCan be used together with the Lower Arm Bar Ver.2 (Type II)\u003c\/li\u003e\n\u003cli\u003eIncludes all required installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31100994551910,"sku":"cus564 475 A","price":108.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-front-lower-bar-type-i-mitsubishi-evo-8-9-2003-2009-suspension-braces-cusco-cus564-475-a.jpg?v=1614512131"},{"product_id":"cusco-trunk-power-brace-mitsubishi-evo-8-9-2003-2009","title":"Cusco [03-06 EVO 8\/9] Rear Trunk Power Brace","description":"\u003cp\u003eThe Cusco Rear Trunk Power Brace stiffens the rear of the chassis by bolting into the interior of the trunk. This brace connects to existing chassis bolt holes and mounting points for a completely reversible, bolt-on application.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCusco part number 564 492 RT — Rear Trunk Power Brace\u003c\/li\u003e\n\u003cli\u003eFits 2003-2006 Mitsubishi Lancer Evolution VIII\/IX — CT9A chassis\u003c\/li\u003e\n\u003cli\u003eBolts into the trunk interior to reduce rear chassis flex\u003c\/li\u003e\n\u003cli\u003eConnects to existing chassis bolt holes — fully reversible installation\u003c\/li\u003e\n\u003cli\u003eCannot be installed together with the Cusco 2-point trunk bar (560 490 A)\u003c\/li\u003e\n\u003cli\u003eIncludes installation brackets and hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31100994682982,"sku":"cus564 492 RT","price":274.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-trunk-power-brace-mitsubishi-evo-8-9-2003-2009-frame-braces-cusco-cus564-492-rt.jpg?v=1614512134"},{"product_id":"cusco-front-member-power-brace-mitsubishi-evo-8-9-2003-2009","title":"Cusco [03-07 EVO 8 \/ 9] Front Member Power Brace","description":"\u003cp\u003eThe Cusco Front Member Power Brace (564 492 FM) for the Mitsubishi Lancer Evolution VIII and IX stiffens the front of the chassis by bolting in place of the factory front bumper beam. It uses the same mounting points as the OEM bumper beam for a simple, completely reversible bolt-on installation, saving weight without compromising chassis integrity. Installation requires removal of the factory bumper beam.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 564 492 FM\u003c\/li\u003e\n\u003cli\u003eSteel construction (per the Cusco catalog)\u003c\/li\u003e\n\u003cli\u003eReplaces the factory front bumper beam to save weight without affecting chassis integrity\u003c\/li\u003e\n\u003cli\u003eBolt-on installation using the factory bumper beam mounting points\u003c\/li\u003e\n\u003cli\u003eCompletely reversible application\u003c\/li\u003e\n\u003cli\u003ePowder-coated in Cusco's flagship blue finish\u003c\/li\u003e\n\u003cli\u003eFitment: 2003-2007 Mitsubishi Lancer Evolution VIII\/IX (CT9A)\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31100995010662,"sku":"cus564 492 FM","price":301.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-front-member-power-brace-mitsubishi-evo-8-9-2003-2009-frame-braces-cusco-cus564-492-fm.jpg?v=1614512144"},{"product_id":"cusco-front-side-power-braces-mitsubishi-evo-8-9-2003-2009","title":"Cusco [03-07 EVO 8 \/ 9] Front Side Power Braces","description":"\u003cp\u003eThe Cusco Front Side Power Braces (564 492 FS) for the Mitsubishi Lancer Evolution VIII and IX stiffen the chassis with two smaller braced positions on the left and right side of the underbody. These braces connect to existing chassis bolt holes and mounting points for a completely reversible, bolt-on application.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 564 492 FS\u003c\/li\u003e\n\u003cli\u003ePair of braces for the left and right side of the underbody\u003c\/li\u003e\n\u003cli\u003eBolt-on installation using factory holes, bolts and nuts\u003c\/li\u003e\n\u003cli\u003eCompletely reversible application\u003c\/li\u003e\n\u003cli\u003eFitment: 2003-2007 Mitsubishi Lancer Evolution VIII\/IX (CT9A)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31100995174502,"sku":"cus564 492 FS","price":220.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-front-side-power-braces-mitsubishi-evo-8-9-2003-2009-frame-braces-cusco-cus564-492-fs.jpg?v=1614512147"},{"product_id":"cusco-front-center-power-brace-mitsubishi-evo-8-9-2003-2009","title":"Cusco [03-07 EVO 8 \/ 9] Front Center Power Brace","description":"\u003cp\u003eThe Cusco Front Center Power Brace (564 492 FC) for the Mitsubishi Lancer Evolution VIII and IX stiffens the center chassis with a 4-point brace in the front\/center of the vehicle. This brace connects to existing chassis bolt holes and mounting points for a completely reversible, bolt-on application.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 564 492 FC\u003c\/li\u003e\n\u003cli\u003e4-point brace for the front\/center of the chassis\u003c\/li\u003e\n\u003cli\u003eBolt-on installation using factory holes, bolts and nuts\u003c\/li\u003e\n\u003cli\u003eCompletely reversible application\u003c\/li\u003e\n\u003cli\u003eFitment: 2003-2007 Mitsubishi Lancer Evolution VIII\/IX (CT9A)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31100995272806,"sku":"cus564 492 FC","price":261.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-front-center-power-brace-mitsubishi-evo-8-9-2003-2009-frame-braces-cusco-cus564-492-fc.jpg?v=1614512148"},{"product_id":"cusco-center-power-brace-mitsubishi-evo-8-9-2003-2009","title":"Cusco [03-07 EVO 8 \/ 9] Center Power Brace","description":"\u003cp\u003eThe Cusco Center Power Brace stiffens the center of the CT9A Lancer Evolution chassis. Running lengthwise, it ties into the existing chassis bolt holes and mounting points to reduce body flex under hard cornering and braking. Installation is completely reversible with no permanent modification.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReinforces the center floor section of the CT9A chassis (EVO 8\/9)\u003c\/li\u003e\n\u003cli\u003eBolts to existing factory mounting points\u003c\/li\u003e\n\u003cli\u003eFully reversible installation\u003c\/li\u003e\n\u003cli\u003eRequires the Cusco Front Center Power Brace (564 492 FC) to fit properly\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31100995534950,"sku":"cus564 492 C","price":567.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-center-power-brace-mitsubishi-evo-8-9-2003-2009-frame-braces-cusco-cus564-492-c.jpg?v=1614512153"},{"product_id":"cusco-zero-3-competition-coilover-kit-mitsubishi-evo-8-9-2003-2006","title":"Cusco [03-07 EVO 8 \/ 9] ZERO-3 Competition Coilover Kit","description":"\u003cp\u003eCusco Sport ZERO-3 Competition coilovers are built for serious use. These newly developed mono-tube shock absorbers offer 24-step damping force adjustments, giving you wide precise and detailed settings from street to professional competition use. Paired with Cusco's solid high strength metal and spherical bushing pillow ball mounts, the system gives quick steering response and precise driving \u0026amp; braking control. The coilovers are double adjustable to allow for ride height setting done separate from spring preload to allow for maximum performance. All Zero-3 components pass a salt spraying test, preventing in sticking components caused by rusting, keeping each coil-over kit clean and lasting longer.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpring Rates: F: 12kg\/mm, 671lb\/in R: 11kg\/mm, 615lb\/in\u003c\/li\u003e\n\u003cli\u003eUpper Mounts: adjustable pillowball front, non adjustable pillowball rear\u003c\/li\u003e\n\u003cli\u003eAdjustability: Height, Preload, 24 Step Dampening\u003c\/li\u003e\n\u003cli\u003eAdjustability Range: F: -70mm to 0mm \/ R: -50mm to -0mm\u003c\/li\u003e\n\u003cli\u003eE-Con Compatibility: no\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31100995731558,"sku":"cus564 63R CP","price":2232.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-zero-3-competition-coilover-kit-mitsubishi-evo-8-9-2003-2006-coilovers-cusco-cus564-63r-cp.jpg?v=1614512155"},{"product_id":"cusco-front-pillowball-upper-mount-mitsubishi-evolution-8-9-2003-2006","title":"Cusco [03-07 EVO 8\/9] Front Pillowball Upper Mount","description":"\u003cp\u003eThe Cusco Front Pillowball Upper Mount (564 410 A) is a camber-adjustable pillowball upper mount for the Mitsubishi Lancer Evolution VIII and IX (CT9A). Replacing the factory rubber mounts with rigid pillowball bearings greatly increases turn-in stability and steering response, and camber is adjusted simply by loosening the top bolts and sliding the plates to the desired setting.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 564 410 A\u003c\/li\u003e\n\u003cli\u003eCamber-adjustable pillowball upper mounts — slide the plates inward for negative camber, outward for positive\u003c\/li\u003e\n\u003cli\u003e6mm-thick 2017S duralumin plates for maximum strength and durability\u003c\/li\u003e\n\u003cli\u003eGreatly increased turn-in stability and response; more stable over bumps and high-speed corners\u003c\/li\u003e\n\u003cli\u003eKit includes 2 upper mounts, 2 pillow collars and 2 pillow nuts\u003c\/li\u003e\n\u003cli\u003eFitment: 2003-2005 Mitsubishi Lancer Evolution VIII, 2005-2007 Evolution IX (CT9A)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31101005135974,"sku":"cus564 410 A","price":360.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-front-pillowball-upper-mount-mitsubishi-evolution-8-9-2003-2006-top-hats-cusco-cus564-410-a.jpg?v=1614512239"},{"product_id":"cusco-pillowball-front-lower-arm-bushing-front-side-mitsubishi-evo-8-9-2003-2006","title":"Cusco [03-07 EVO 8\/9] Pillowball Front Lower Arm Bushing, Front Side","description":"\u003cp\u003eThe Cusco Pillowball Front Lower Arm Bushing (564 464 BV) replaces the factory rubber bushings on the front side of the front lower arm of the Mitsubishi Lancer Evolution VIII and IX (CT9A) with rigid pillowball bearings. With no compression or deflection, the suspension responds directly for sharper control and stability, while the bearings offer higher load-bearing capacity, tear strength and grease\/oil tolerance than stock rubber bushings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 564 464 BV\u003c\/li\u003e\n\u003cli\u003eFront lower arm — front side; set of 2 bushings (sold as a pair)\u003c\/li\u003e\n\u003cli\u003eRace-proven pillowball (spherical) bearings: no compression, no deflection, direct suspension response\u003c\/li\u003e\n\u003cli\u003eHigher load-bearing capacity, tear strength and tolerance to greases and oils than stock rubber bushings\u003c\/li\u003e\n\u003cli\u003eBearings assembled in high-quality shells\u003c\/li\u003e\n\u003cli\u003eFitment: 2003-2005 Mitsubishi Lancer Evolution VIII, 2005-2007 Evolution IX (CT9A)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31101005267046,"sku":"cus564 464 BV","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-pillowball-front-lower-arm-bushing-front-side-mitsubishi-evo-8-9-2003-2006-aftermarket-bushings-cusco-cus564-464-bv.jpg?v=1614512240"},{"product_id":"cusco-pillow-ball-rear-upper-arm-bushing-mitsubishi-evo-8-9-2003-2006","title":"Cusco [03-07 EVO 8\/9] Pillow Ball Rear Upper Arm Bushing","description":"\u003cp\u003eThe Cusco Pillow Ball Rear Upper Arm Bushing (560 464 LV) replaces the factory rubber bushings on the rear upper arm of the Mitsubishi Lancer Evolution VIII and IX (CT9A) with rigid pillowball bearings. With no compression or deflection, the suspension responds directly for sharper control and stability, while the bearings offer higher load-bearing capacity, tear strength and grease\/oil tolerance than stock rubber bushings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eManufacturer part number: 560 464 LV\u003c\/li\u003e\n\u003cli\u003eRear upper arm; set of 2 bushings (sold as a pair)\u003c\/li\u003e\n\u003cli\u003eRace-proven pillowball (spherical) bearings: no compression, no deflection, direct suspension response\u003c\/li\u003e\n\u003cli\u003eHigher load-bearing capacity, tear strength and tolerance to greases and oils than stock rubber bushings\u003c\/li\u003e\n\u003cli\u003eBearings assembled in high-quality shells\u003c\/li\u003e\n\u003cli\u003eFitment: 2003-2005 Mitsubishi Lancer Evolution VIII, 2005-2007 Evolution IX (CT9A)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31101005365350,"sku":"cus560 464 LV","price":220.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-pillow-ball-rear-upper-arm-bushing-mitsubishi-evo-8-9-2003-2006-aftermarket-bushings-cusco-cus560-464-lv.jpg?v=1614512240"},{"product_id":"cusco-type-40-front-strut-bar-mitsubishi-evo-8-9-2003-2006","title":"Cusco [01-06 EVO 7\/8\/9] Front Type 40 Strut Bar","description":"\u003cp\u003eThe Cusco Type 40 front strut bar for the 2003-2006 Mitsubishi Lancer Evolution 8 and 9 (CT9A). Strut tower bars tie the front strut towers together, reducing chassis flex so the suspension mounting points stay aligned under hard cornering loads and the suspension performs as intended.\u003c\/p\u003e\u003cp\u003eType 40 is Cusco's heavy-duty 40mm aluminum round-shaft design: a hollow polished aluminum center section with high rigidity to withstand competition use, with end plates finished in titanium gray for flawless, application-specific fitment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 565 525 A\u003c\/li\u003e\n\u003cli\u003ePosition: Front\u003c\/li\u003e\n\u003cli\u003eBar Type: Type 40 - 40mm hollow polished aluminum round shaft\u003c\/li\u003e\n\u003cli\u003eEnd Plates: Titanium gray finish\u003c\/li\u003e\n\u003cli\u003eApplication: 2003-2006 Mitsubishi Lancer Evolution 8 \u0026amp; 9 (CT9A); Cusco Japan also lists the JDM Evolution 7 (CT9A, 2001-2003)\u003c\/li\u003e\n\u003cli\u003eBolt-on installation; all necessary hardware included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31101028335718,"sku":"cus565 525 A","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-type-40-front-strut-bar-mitsubishi-evo-8-9-2003-2006-strut-bars-cusco-cus565-525-a.jpg?v=1614512476"},{"product_id":"cusco-3-point-type-os-front-strut-bar-w-brace-mitsubishi-evo-8-9-2003-2006","title":"Cusco [03-06 EVO 8\/9] Front Type OS 3-Point Strut Bar with BCS - LHD","description":"\u003cp\u003eThe Cusco Type OS 3-point front strut bar with Brake Cylinder Stopper for the 2003-2006 Mitsubishi Lancer Evolution 8 and 9 (CT9A), left-hand-drive models. Strut tower bars tie the front strut towers together, reducing chassis flex so the suspension mounting points stay aligned under hard cornering loads.\u003c\/p\u003e\u003cp\u003eType OS bars use a tubular aluminum oval shaft with a high-polish finish for high rigidity with low weight, and the steel end plates are painted in traditional Cusco blue. The 3-point design triangulates the bar and ties into the firewall for maximum front-end rigidity. Installation is easy and all necessary hardware is included.\u003c\/p\u003e\u003cp\u003eThis version includes Cusco's Brake Cylinder Stopper (BCS) - a master cylinder brace that prevents the firewall from flexing where the brake master cylinder mounts during hard braking, reducing brake pedal effort and delivering a firmer pedal feel.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 565 540 ATMLHD\u003c\/li\u003e\n\u003cli\u003ePosition: Front, 3-point (ties into the firewall)\u003c\/li\u003e\n\u003cli\u003eBar Type: Type OS - tubular aluminum oval shaft, high-polish finish\u003c\/li\u003e\n\u003cli\u003eEnd Plates: Cusco blue\u003c\/li\u003e\n\u003cli\u003eBrake Cylinder Stopper (BCS) included - master cylinder brace\u003c\/li\u003e\n\u003cli\u003eFits left-hand-drive (LHD) models only\u003c\/li\u003e\n\u003cli\u003eApplication: 2003-2006 Mitsubishi Lancer Evolution 8 \u0026amp; 9 (CT9A)\u003c\/li\u003e\n\u003cli\u003eBolt-on installation; all necessary hardware included\u003c\/li\u003e\n\u003cli\u003eNote: product photo shows the 2-point Type OS front bar; the 3-point bar differs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31101028565094,"sku":"cus565 540 ATMLHD","price":261.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-3-point-type-os-front-strut-bar-w-brace-mitsubishi-evo-8-9-2003-2006-strut-bars-cusco-cus565-540-atmlhd.jpg?v=1614512477"},{"product_id":"cusco-3-point-type-os-front-strut-bar-mitsubishi-evo-8-9-2003-2006","title":"Cusco [01-06 EVO 7\/8\/9] Front Type OS 3-Point Strut Bar - LHD","description":"\u003cp\u003eThe Cusco Type OS 3-point front strut bar for the 2003-2006 Mitsubishi Lancer Evolution 8 and 9 (CT9A), left-hand-drive models. Strut tower bars tie the front strut towers together, reducing chassis flex so the suspension mounting points stay aligned under hard cornering loads.\u003c\/p\u003e\u003cp\u003eType OS bars use a tubular aluminum oval shaft with a high-polish finish for high rigidity with low weight, and the steel end plates are painted in traditional Cusco blue. The 3-point design triangulates the bar and ties into the firewall for maximum front-end rigidity. Installation is easy and all necessary hardware is included.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 565 540 ATLHD\u003c\/li\u003e\n\u003cli\u003ePosition: Front, 3-point (ties into the firewall)\u003c\/li\u003e\n\u003cli\u003eBar Type: Type OS - tubular aluminum oval shaft, high-polish finish\u003c\/li\u003e\n\u003cli\u003eEnd Plates: Cusco blue\u003c\/li\u003e\n\u003cli\u003eFits left-hand-drive (LHD) models only\u003c\/li\u003e\n\u003cli\u003eApplication: 2003-2006 Mitsubishi Lancer Evolution 8 \u0026amp; 9 (CT9A)\u003c\/li\u003e\n\u003cli\u003eBolt-on installation; all necessary hardware included\u003c\/li\u003e\n\u003cli\u003eNote: product photo shows the 2-point Type OS front bar; the 3-point bar differs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31101028597862,"sku":"cus565 540 ATLHD","price":252.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-3-point-type-os-front-strut-bar-mitsubishi-evo-8-9-2003-2006-strut-bars-cusco-cus565-540-atlhd.jpg?v=1614512479"},{"product_id":"cusco-type-cb-rear-strut-bar-mitsubishi-evolution-8-9-2003-2006","title":"Cusco [01-06 EVO 7\/8\/9] Rear Type CB Strut Bar","description":"\u003cp\u003eThe Cusco Type CB rear strut bar for the 2003-2006 Mitsubishi Lancer Evolution 8 and 9 (CT9A). Rear strut bars tie the rear strut towers together, reducing chassis flex so the rear suspension mounting points stay aligned under hard cornering loads.\u003c\/p\u003e\u003cp\u003eType CB is Cusco's carbon fiber strut bar: a 40mm carbon fiber pipe shaft that is both super light and super strong, paired with titanium-gray finished end plates and a clear-coat finish for a premium look that lasts. Installation is easy and all necessary hardware is included.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 564 551 A\u003c\/li\u003e\n\u003cli\u003ePosition: Rear\u003c\/li\u003e\n\u003cli\u003eBar Type: Type CB - 40mm carbon fiber pipe shaft\u003c\/li\u003e\n\u003cli\u003eEnd Plates: Titanium gray finish, clear-coated\u003c\/li\u003e\n\u003cli\u003eApplication: 2003-2006 Mitsubishi Lancer Evolution 8 \u0026amp; 9 (CT9A); Cusco Japan also lists the JDM Evolution 7 (CT9A, 2001-2003)\u003c\/li\u003e\n\u003cli\u003eBolt-on installation; all necessary hardware included\u003c\/li\u003e\n\u003cli\u003eNote: rear trim modification is required for installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31101028630630,"sku":"cus564 551 A","price":328.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-type-cb-rear-strut-bar-mitsubishi-evolution-8-9-2003-2006-strut-bars-cusco-cus564-551-a.jpg?v=1614512481"},{"product_id":"cusco-type-40-rear-strut-bar-mitsubishi-evolution-8-9-2003-2006","title":"Cusco [01-06 EVO 7\/8\/9] Rear Type 40 Strut Bar","description":"\u003cp\u003eThe Cusco Type 40 rear strut bar for the 2003-2006 Mitsubishi Lancer Evolution 8 and 9 (CT9A). Rear strut bars tie the rear strut towers together, reducing chassis flex so the rear suspension mounting points stay aligned under hard cornering loads.\u003c\/p\u003e\u003cp\u003eType 40 is Cusco's heavy-duty 40mm aluminum round-shaft design: a hollow polished aluminum center section with high rigidity to withstand competition use, with end plates finished in titanium gray for flawless, application-specific fitment. Installation is easy and all necessary hardware is included.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 564 526 A\u003c\/li\u003e\n\u003cli\u003ePosition: Rear\u003c\/li\u003e\n\u003cli\u003eBar Type: Type 40 - 40mm hollow polished aluminum round shaft\u003c\/li\u003e\n\u003cli\u003eEnd Plates: Titanium gray finish\u003c\/li\u003e\n\u003cli\u003eApplication: 2003-2006 Mitsubishi Lancer Evolution 8 \u0026amp; 9 (CT9A); Cusco Japan also lists the JDM Evolution 7 (CT9A, 2001-2003)\u003c\/li\u003e\n\u003cli\u003eBolt-on installation; all necessary hardware included\u003c\/li\u003e\n\u003cli\u003eNote: rear trim modification is required for installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31101028663398,"sku":"cus564 526 A","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-type-40-rear-strut-bar-mitsubishi-evolution-8-9-2003-2006-strut-bars-cusco-cus564-526-a.jpg?v=1614512482"},{"product_id":"cusco-type-os-t-rear-strut-brace-mitsubishi-evolution-8-9","title":"Cusco [03-06 EVO 8\/9] Rear Type OS-T Triangle Add-On Brace","description":"\u003cp\u003eCusco's Type OS-T triangle brace for the rear of the 2003-2006 Mitsubishi Lancer Evolution 8 \u0026amp; 9. The Type OS-T is a third-point add-on bar that bolts to an existing Cusco rear strut tower bar, tying it to an additional point in the trunk to form a 3-point triangle for added chassis rigidity and more direct contact with the chassis.\u003c\/p\u003e\u003cp\u003eThis is a supplementary brace only — it cannot be used on its own. It pairs with a Cusco rear strut bar (Type OS, Type 40, Type 40D, Type CB, or Type AS). The bar uses Cusco's signature oval-section aluminum shaft, engineered inside and out for the right balance of light weight and strength.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 564 544 A\u003c\/li\u003e\n\u003cli\u003eType: Type OS-T (Triangle) supplementary add-on brace\u003c\/li\u003e\n\u003cli\u003ePosition: Rear\u003c\/li\u003e\n\u003cli\u003eRequires an existing Cusco rear strut tower bar — cannot be used separately (bar sold separately)\u003c\/li\u003e\n\u003cli\u003ePairs with Cusco rear strut bars: Type OS, Type 40, Type 40D, Type CB, Type AS\u003c\/li\u003e\n\u003cli\u003eMaterial: Oval-section aluminum shaft\u003c\/li\u003e\n\u003cli\u003eApplication: 2003-2006 Mitsubishi Lancer Evolution 8 \u0026amp; 9\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31101028696166,"sku":"cus564 544 A","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-type-os-t-rear-strut-brace-mitsubishi-evolution-8-9-strut-bars-cusco-cus564-544-a.jpg?v=1614512483"},{"product_id":"cusco-type-os-rear-strut-bar-mitsubishi-evolution-8-9-2003-2006","title":"Cusco [03-06 EVO 8\/9] Rear Type OS Strut Bar","description":"\u003cp\u003eCusco's Type OS rear strut bar for the 2003-2006 Mitsubishi Lancer Evolution 8 \u0026amp; 9. The Type OS bar uses a tubular aluminum oval shaft with a high-polish finish: highly rigid to resist flex, stiffening the chassis between the rear strut towers for sharper handling and better stability under hard cornering.\u003c\/p\u003e\u003cp\u003eThe end plates are finished in Cusco's signature blue. Installation is a simple bolt-on at the factory strut-tower mounting points, and all necessary hardware is included.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 564 541 A\u003c\/li\u003e\n\u003cli\u003eType: Type OS (Oval Shaft)\u003c\/li\u003e\n\u003cli\u003ePosition: Rear\u003c\/li\u003e\n\u003cli\u003eMaterial: Tubular aluminum oval shaft, high-polish finish\u003c\/li\u003e\n\u003cli\u003eEnd plates: Cusco blue finish\u003c\/li\u003e\n\u003cli\u003eInstallation: Bolt-on; all necessary hardware included\u003c\/li\u003e\n\u003cli\u003eApplication: 2003-2006 Mitsubishi Lancer Evolution 8 \u0026amp; 9\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31101028728934,"sku":"cus564 541 A","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/square-20167277215846.jpg?v=1791966900"},{"product_id":"cusco-25mm-front-sway-bar-mitsubishi-evolution-8-9-2003-2006","title":"Cusco [03-06 EVO 8\/9] Front 25mm Sway Bar","description":"\u003cp\u003eCusco's front sway bar for the 2003-2006 Mitsubishi Lancer Evolution 8 \u0026amp; 9. At 25mm in diameter versus the 23mm factory bar, it delivers 123% of stock stiffness — cutting body roll and keeping the car flatter through corners, with more precise turn-in and steadier high-speed stability.\u003c\/p\u003e\u003cp\u003eThe bar bolts directly to the factory mounting locations and re-uses the OEM bushings and brackets for a straightforward installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 564 311 A25\u003c\/li\u003e\n\u003cli\u003ePosition: Front\u003c\/li\u003e\n\u003cli\u003eDiameter: 25mm (factory bar: 23mm)\u003c\/li\u003e\n\u003cli\u003eStiffness: 123% of stock\u003c\/li\u003e\n\u003cli\u003eNon-adjustable\u003c\/li\u003e\n\u003cli\u003eSteel construction\u003c\/li\u003e\n\u003cli\u003eRe-uses OEM bushings and brackets; bolts to factory mounting locations\u003c\/li\u003e\n\u003cli\u003eApplication: 2003-2006 Mitsubishi Lancer Evolution 8 \u0026amp; 9\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31101029154918,"sku":"cus564 311 A25","price":378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-25mm-front-sway-bar-mitsubishi-evolution-8-9-2003-2006-sway-bars-cusco-cus564-311-a25.jpg?v=1614512485"},{"product_id":"cusco-18mm-rear-sway-bar-mitsubishi-evolution-8-9-2003-2006","title":"Cusco [03-06 EVO 8\/9] Rear 18mm Sway Bar","description":"\u003cp\u003eCusco's rear sway bar for the 2003-2006 Mitsubishi Lancer Evolution 8 \u0026amp; 9. The 18mm bar is 3-step adjustable, letting you dial rear stiffness between 30%, 46%, and 57% over stock to tune the car's balance — stiffer settings sharpen rotation and cut understeer, while softer settings calm the rear on slippery or rough surfaces.\u003c\/p\u003e\u003cp\u003eThe bar bolts to the factory mounting locations, and bushings are included for installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 560 311 BJ18\u003c\/li\u003e\n\u003cli\u003ePosition: Rear\u003c\/li\u003e\n\u003cli\u003eDiameter: 18mm (factory bar: 22mm)\u003c\/li\u003e\n\u003cli\u003eStiffness: 3-step adjustable — 30\/46\/57% over stock\u003c\/li\u003e\n\u003cli\u003eSteel construction\u003c\/li\u003e\n\u003cli\u003eBushings included; bolts to factory mounting locations\u003c\/li\u003e\n\u003cli\u003eApplication: 2003-2006 Mitsubishi Lancer Evolution 8 \u0026amp; 9\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31101029187686,"sku":"cus560 311 BJ18","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-18mm-rear-sway-bar-mitsubishi-evolution-8-9-2003-2006-sway-bars-cusco-cus560-311-bj18.jpg?v=1614512486"},{"product_id":"cusco-23mm-rear-sway-bar-mitsubishi-evolution-8-9-2003-2006","title":"Cusco [03-05 EVO 8, 05-07 EVO 9] 23mm Adjustable Rear Sway Bar","description":"\u003cp\u003eThe Cusco 23mm Rear Sway Bar for the Mitsubishi Lancer Evolution 8 \u0026amp; 9. This 23mm bar replaces the factory rear sway bar using the factory mounting locations, dramatically reducing body roll without changing ride comfort. It is 3-way adjustable — 103%, 115%, or 125% stiffer than the standard bar — so rear roll stiffness can be tuned for street or track use. Bushings are included for a complete bolt-on installation.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e23mm rear sway bar — 3-way adjustable (103% \/ 115% \/ 125% vs. standard)\u003c\/li\u003e\n\u003cli\u003eBushings included\u003c\/li\u003e\n\u003cli\u003eDirect replacement using the factory mounting locations\u003c\/li\u003e\n\u003cli\u003eReduces body roll; improves cornering stability and steering response\u003c\/li\u003e\n\u003cli\u003ePart number: 560 311 BJ23\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cusco","offers":[{"title":"Default Title","offer_id":31101034496102,"sku":"cus560 311 BJ23","price":378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cusco-23mm-rear-sway-bar-mitsubishi-evolution-8-9-2003-2006-sway-bars-cusco-cus560-311-bj23.jpg?v=1614512523"},{"product_id":"whiteline-roll-center-kit-mitsubishi-evo-8-9-10-2003-2015","title":"Whiteline [03-05 EVO 8, 06-07 EVO 9, 08-15 EVO X] Roll-Center Kit","description":"\u003cp\u003eThe Whiteline Roll-Center Kit is a front roll-center correction kit for lowered 2003-2005 Mitsubishi EVO 8, 2006-2007 Mitsubishi EVO 9 and 2008-2015 Mitsubishi EVO X models. Lowering the ride height modifies the front roll-center, which can make the car handle worse than stock; this kit realigns the suspension geometry of a lowered Evolution, raising the front roll-center for increased front roll resistance and reduced suspension compression on the outside front wheel during cornering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: KCA395\u003c\/li\u003e\n\u003cli\u003eFitment: 2003-2005 Mitsubishi EVO 8; 2006-2007 Mitsubishi EVO 9; 2008-2015 Mitsubishi EVO X (lowered vehicles)\u003c\/li\u003e\n\u003cli\u003eFunction: Raises the front roll-center on a lowered vehicle to restore suspension geometry\u003c\/li\u003e\n\u003cli\u003eBenefits: Improved front end weight distribution, better maintained camber angle, improved front end grip, reduced understeer and improved steering feel, precision and vehicle stability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this roll-center kit fit my Evolution?\u003c\/strong\u003e\u003cbr\u003eA: Yes — the KCA395 fits the 2003-2005 Mitsubishi EVO 8, the 2006-2007 Mitsubishi EVO 9 and the 2008-2015 Mitsubishi EVO X.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Why does a lowered Evolution need a roll-center kit?\u003c\/strong\u003e\u003cbr\u003eA: Lowering the ride height modifies the front roll-center and can make the car handle worse than stock; this kit realigns the suspension geometry and raises the front roll-center.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The kit contains the Whiteline roll-center correction components for the front suspension of the Evolution models listed.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":31105450246246,"sku":"whlKCA395","price":199.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/whiteline-roll-center-kit-mitsubishi-evo-8-9-10-2003-2015-kca395-tie-rods-ball-joints-whiteline-wlkca395.jpg?v=1614516115"},{"product_id":"whiteline-rear-end-links-adjustable-ball-mitsubishi-evo-8-9-2003-2009","title":"Whiteline [03-07 EVO 8 \/ EVO 9] Rear End Links - Adjustable Ball","description":"\u003cp\u003eThe Whiteline Rear End Links - Adjustable Ball for the Mitsubishi EVO 8 and EVO 9 are performance sway bar end links for the rear position. Whiteline end links feature anodized aluminum turn-buckles and fully adjustable stainless steel rod-ends, allowing the suspension setup to be custom tuned to maximize handling performance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: KLC102\u003c\/li\u003e\n\u003cli\u003eFitment: 2003-2005 Mitsubishi EVO 8 and 2006-2007 Mitsubishi EVO 9\u003c\/li\u003e\n\u003cli\u003ePosition: Rear\u003c\/li\u003e\n\u003cli\u003eType: Adjustable ball end links with anodized aluminum turn-buckles and stainless steel rod-ends\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Do these end links fit my EVO 8 or EVO 9?\u003c\/strong\u003e\u003cbr\u003eA: Yes - these rear end links fit the 2003-2005 Mitsubishi EVO 8 and the 2006-2007 Mitsubishi EVO 9.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The kit includes the Whiteline adjustable ball rear end link assembly for the rear sway bar position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Are these end links adjustable?\u003c\/strong\u003e\u003cbr\u003eA: Yes - the end links are fully adjustable, allowing the suspension setup to be custom tuned.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":31105462632550,"sku":"whlKLC102","price":118.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/whiteline-rear-end-links-adjustable-ball-mitsubishi-evo-8-9-2003-2009-klc102-end-links-whiteline-wlklc102.jpg?v=1614516160"},{"product_id":"whiteline-anti-sway-bar-front-rear-kit-mitsubishi-evo-8-evo-9-2003-2006","title":"Whiteline [03-06 EVO 8, EVO 9] Front and Rear Sway Bar Kit","description":"\u003cp\u003eThe Whiteline Front and Rear Sway Bar Kit for the Mitsubishi EVO 8 and EVO 9 is engineered to Activate More Grip as a packaged solution designed to improve performance and enhance the driving experience. The kit is completed with high quality sway bar links and mounting accessories that ensure optimum performance and ease of installation, for perfect balance and precise tuning.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: BMK009M\u003c\/li\u003e\n\u003cli\u003eFitment: Mitsubishi EVO 8 and EVO 9, 2003-2006\u003c\/li\u003e\n\u003cli\u003eFront Sway Bar: 26mm\u003c\/li\u003e\n\u003cli\u003eRear Sway Bar: 26mm, 3 point adjustable\u003c\/li\u003e\n\u003cli\u003eKit Contains: BMF48, BMR65XXZ, KLC139 and KLC102\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this kit fit my EVO 8 or EVO 9?\u003c\/strong\u003e\u003cbr\u003eA: Yes - this front and rear sway bar kit is listed for the 2003-2006 Mitsubishi EVO 8 and EVO 9.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The kit contains BMF48, BMR65XXZ, KLC139 and KLC102 - front and rear sway bars with sway bar links and mounting accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Are the sway bars adjustable?\u003c\/strong\u003e\u003cbr\u003eA: The rear sway bar in this kit is 26mm and 3 point adjustable; the front sway bar is 26mm.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":31105499627622,"sku":"whlBMK009M","price":937.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/whiteline-anti-sway-bar-front-rear-kit-mitsubishi-evo-8-evo-9-2003-2006-bmk009m-suspension-packages-whiteline-wlbmk009m.jpg?v=1614516288"},{"product_id":"whiteline-plus-traction-control-rear-differential-mount-insert-mitsubishi-evo-8-9-2003-2006","title":"Whiteline [03-06 EVO 8 \/ EVO 9] Traction Control Rear Differential Mount Inserts","description":"\u003cp\u003eThe Whiteline Traction Control Rear Differential Mount Inserts for the 2003-2006 Mitsubishi EVO 8 and EVO 9 are an easy to install solution to get rid of the \"clunk\". The Whiteline Plus rear differential mount inserts or \"traction control\" kits for the 03-06 Mitsubishi Evolution 8 \u0026amp; 9 address the differential movement heard as a clunking sound during shifts - the diff mounts in factory form allow the diffs to move around a lot, most noticeable during acceleration from a stand still and shifting gears quickly. The Whiteline kits provide the driver with a precise gear shift and predictable clutch engagement as well as a more solid feel during drifting, and get more power to the ground.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: W92956\u003c\/li\u003e\n\u003cli\u003eFitment: 2003-2006 Mitsubishi EVO 8 and EVO 9\u003c\/li\u003e\n\u003cli\u003ePosition: Rear differential mount\u003c\/li\u003e\n\u003cli\u003eEasy to install solution to reduce differential movement and the clunk heard during shifts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Do these inserts fit my EVO 8 or EVO 9?\u003c\/strong\u003e\u003cbr\u003eA: Yes - these rear differential mount inserts fit the 2003-2006 Mitsubishi EVO 8 and EVO 9.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What do these inserts do?\u003c\/strong\u003e\u003cbr\u003eA: They reduce differential movement - the clunk is most noticeable during acceleration from a stand still and shifting gears quickly - and provide a precise gear shift and predictable clutch engagement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Are these inserts easy to install?\u003c\/strong\u003e\u003cbr\u003eA: Yes - the Whiteline Plus rear differential mount inserts are described as an easy to install solution.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":31105518665830,"sku":"whlW92956","price":58.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/whiteline-plus-traction-control-rear-differential-mount-insert-mitsubishi-evo-8-9-2003-2006-w92956-differential-braces-whiteline-wlw92956.jpg?v=1614516322"},{"product_id":"whiteline-rear-strut-bar-mitsubishi-evo-8-evo-9-2003-2006","title":"Whiteline [03-06 EVO 8\/9] Rear Strut Bar","description":"\u003cp\u003eThe Whiteline Rear Strut Bar for the 2003-2006 Mitsubishi Lancer Evolution 8 and Evolution 9 is constructed from a hollow aluminum shaft with adjustable endplates for increased rigidity. This strut bar will increase the rigidity of the chassis.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: KSB628Q\u003c\/li\u003e\n\u003cli\u003eFitment: 2003-2006 Mitsubishi Lancer Evolution 8 and Evolution 9\u003c\/li\u003e\n\u003cli\u003ePosition: Rear\u003c\/li\u003e\n\u003cli\u003eConstruction: Hollow aluminum shaft with adjustable endplates\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this rear strut bar fit my Evolution?\u003c\/strong\u003e\u003cbr\u003eA: Yes - this rear strut bar fits the 2003-2006 Mitsubishi Lancer Evolution 8 and Evolution 9 as listed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is this strut bar made from?\u003c\/strong\u003e\u003cbr\u003eA: It is constructed from a hollow aluminum shaft with adjustable endplates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Where does it install?\u003c\/strong\u003e\u003cbr\u003eA: It installs at the rear of the listed Evolution 8 and Evolution 9 models.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":31105547862118,"sku":"whlKSB628Q","price":160.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/whiteline-rear-strut-bar-mitsubishi-evo-8-evo-9-2003-2006-ksb628q-strut-tower-bars-whiteline-wlksb628q.jpg?v=1614516457"},{"product_id":"whiteline-front-steering-precision-kit-mitsubishi-evo-8-9-2003-2006","title":"Whiteline [03-06 EVO 8\/9] Front Steering Precision Kit","description":"\u003cp\u003eThe Whiteline Front Steering Precision Kit for the 2003-2006 Mitsubishi Lancer Evolution 8 and Evolution 9 is designed to tighten up steering response by taking slop out of the stock steering rack bushings for smooth and precise steering.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: KCA390\u003c\/li\u003e\n\u003cli\u003eFitment: 2003-2006 Mitsubishi Lancer Evolution 8 and Evolution 9\u003c\/li\u003e\n\u003cli\u003ePosition: Front - steering rack bushings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this steering precision kit fit my Evolution?\u003c\/strong\u003e\u003cbr\u003eA: Yes - this kit fits the 2003-2006 Mitsubishi Lancer Evolution 8 and Evolution 9 as listed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What does this kit do?\u003c\/strong\u003e\u003cbr\u003eA: It tightens up steering response by taking slop out of the stock steering rack bushings for smooth and precise steering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Where does it install?\u003c\/strong\u003e\u003cbr\u003eA: It replaces the stock steering rack bushings at the front of the listed Evolution models.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":31105550876774,"sku":"whlKCA390","price":50.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/whiteline-front-steering-precision-kit-mitsubishi-evo-8-9-2003-2006-kca390-aftermarket-bushings-whiteline-wlkca390.jpg?v=1614516460"},{"product_id":"whiteline-rear-bump-steer-kit-mitsubishi-evo-8-9-2003-2006","title":"Whiteline [03-06 EVO 8\/9] Rear Bump-Steer Kit","description":"\u003cp\u003eThe Whiteline Rear Bump-Steer Kit for the 2003-2006 Mitsubishi Lancer Evolution 8 and Evolution 9 addresses bump-steer on lowered Evolutions, where bumps or imperfections in the road can cause the car to steer off-track without driver input. This kit is specifically designed to work in conjunction with the Whiteline roll-center kit and is highly recommended for lowered Evolutions, especially those that see daily or street driving.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: KCA388\u003c\/li\u003e\n\u003cli\u003eFitment: 2003-2006 Mitsubishi Lancer Evolution 8 and Evolution 9\u003c\/li\u003e\n\u003cli\u003ePosition: Rear (as listed)\u003c\/li\u003e\n\u003cli\u003eBump-steer is the result of poor suspension geometry when a vehicle is lowered below factory specs\u003c\/li\u003e\n\u003cli\u003eDesigned to work in conjunction with the Whiteline roll-center kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this bump-steer kit fit my Evolution?\u003c\/strong\u003e\u003cbr\u003eA: Yes - this kit fits the 2003-2006 Mitsubishi Lancer Evolution 8 and Evolution 9 as listed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is bump-steer?\u003c\/strong\u003e\u003cbr\u003eA: Bump-steer is when bumps or imperfections in the road cause a car to steer off-track on its own without driver input, an effect described by many Evolution drivers as needing constant direction correction over a bump.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Should I use this with other Whiteline parts?\u003c\/strong\u003e\u003cbr\u003eA: This kit is specifically designed to work in conjunction with the Whiteline roll-center kit and is highly recommended for lowered Evolutions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":31105550909542,"sku":"whlKCA388","price":49.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/whiteline-rear-bump-steer-kit-mitsubishi-evo-8-9-2003-2006-kca388-aftermarket-bushings-whiteline-wlkca388.jpg?v=1614516461"},{"product_id":"whiteline-24mm-rear-adjustable-sway-bar-mitsubishi-evo-8-9-2003-2006","title":"Whiteline [03-06 EVO 8\/9] Rear Sway Bar 24mm Adjustable","description":"\u003cp\u003eThe Whiteline Rear Sway Bar 24mm Adjustable for the 2003-2006 Mitsubishi Lancer Evolution 8 and Evolution 9 modifies handling balance in terms of steering bias (understeer or oversteer) and increases roll resistance. The stock Evolution 8 and 9 are designed to be biased towards understeer, and a stiffer rear sway bar can bias grip towards the front end of the car, effectively eliminating the factory understeer. All Whiteline sway bars are constructed from solid steel and come in a 'Silver Sparkle II' metallic powder coat colour.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: BMR65XZ\u003c\/li\u003e\n\u003cli\u003eFitment: 2003-2006 Mitsubishi Lancer Evolution 8 and Evolution 9\u003c\/li\u003e\n\u003cli\u003ePosition: Rear\u003c\/li\u003e\n\u003cli\u003eDiameter: 24mm\u003c\/li\u003e\n\u003cli\u003eAdjustable: Yes\u003c\/li\u003e\n\u003cli\u003eConstruction: Solid steel with 'Silver Sparkle II' metallic powder coat\u003c\/li\u003e\n\u003cli\u003eIncludes: Replacement polyurethane bushings, installation grease and instructions in each Whiteline sway bar kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this rear sway bar fit my Evolution?\u003c\/strong\u003e\u003cbr\u003eA: Yes - this 24mm rear sway bar fits the 2003-2006 Mitsubishi Lancer Evolution 8 and Evolution 9 as listed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: Replacement polyurethane bushings, installation grease and instructions are included in each Whiteline sway bar kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is this rear sway bar adjustable?\u003c\/strong\u003e\u003cbr\u003eA: Yes - Whiteline sway bars for the Evolution 8 and 9 are available as either a fixed or adjustable design, and this is the adjustable 24mm rear version as listed.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":31105550975078,"sku":"whlBMR65XZ","price":206.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/whiteline-24mm-rear-adjustable-sway-bar-mitsubishi-evo-8-9-2003-2006-bmr65xz-sway-bars-whiteline-wlbmr65xz.jpg?v=1614516462"},{"product_id":"whiteline-26mm-fixed-front-sway-bar-mitsubishi-evo-8-9-2003-2006","title":"Whiteline [03-06 EVO 8\/9] Front Sway Bar 26mm Fixed","description":"\u003cp\u003eThe Whiteline Front Sway Bar 26mm Fixed for the 2003-2006 Mitsubishi Lancer Evolution 8 and Evolution 9 is a 26mm fixed front sway bar. Increasing the diameter of a sway bar modifies handling balance in terms of steering bias (understeer or oversteer) and increases roll resistance.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: BMF48\u003c\/li\u003e\n\u003cli\u003eFitment: 2003-2006 Mitsubishi Lancer Evolution 8 and Evolution 9\u003c\/li\u003e\n\u003cli\u003ePosition: Front\u003c\/li\u003e\n\u003cli\u003eDiameter: 26mm\u003c\/li\u003e\n\u003cli\u003eAdjustable: No - fixed design\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this front sway bar fit my Evolution?\u003c\/strong\u003e\u003cbr\u003eA: Yes - this 26mm front sway bar fits the 2003-2006 Mitsubishi Lancer Evolution 8 and Evolution 9 as listed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Is this front sway bar adjustable?\u003c\/strong\u003e\u003cbr\u003eA: No - BMF48 is a fixed 26mm front sway bar as listed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What does a larger front sway bar do?\u003c\/strong\u003e\u003cbr\u003eA: Increasing sway bar diameter modifies handling balance in terms of steering bias and increases roll resistance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Whiteline","offers":[{"title":"Default Title","offer_id":31105551007846,"sku":"whlBMF48","price":195.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/whiteline-26mm-fixed-front-sway-bar-mitsubishi-evo-8-9-2003-2006-bmf48-sway-bars-whiteline-wlbmf48.jpg?v=1614516463"},{"product_id":"bilstein-b16-performance-suspension-system-mitsubishi-evo-8-9-2003-2006","title":"Bilstein B16 Performance Suspension System Mitsubishi EVO 8 + 9 2003-2006","description":"\u003cp\u003eIncrease the looks and performance of your Evolution with a Bilstein B16 system. This system features high quality monotube gas shocks with \u003cspan id=\"ctl00_mainArea_userStoryView_tabControl\"\u003eprecise compression and rebound settings (from comfort to competition) \u003c\/span\u003ealong with application specific, progressive rate coil springs. The Bilstein B16 system allows you to set your cars ride height for your desired look and performance handling characteristics. The solid aluminum spring seat and lock nut allow for precise adjustment of the vehicles ride height. Ride height adjustments can be easily made on the vehicle without removing the suspension. Enjoy your improved safety and sportiness through added traction and enhanced stability. The B16 PSS setup allows you to dial through the 9 damping settings to fine tune ride and handling characteristics, have your Evo perform exactly how you want!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhy Bilstein Earning the number-one name in suspension doesn't come easy. Bilstein proves their worth and earns their rep the hard way on racetracks and desert circuits around the world. Applying what they learn at the track to the street, Bilstein designs their shocks to transform your vehicle into a fine-tuned performance machine. Bilstein shocks boast a mono-tube design that instantaneously adjusts to the road surface. Unlike conventional multi-tube shocks, mono-tube performance never suffers from age, use or heat, and they never require manual adjustments. Just bolt on and go. Surface coatings using Triple-C-Technology provide long-lasting corrosion resistance so you can be sure you will be going for quite some time! Best yet, Bilstein backs your shocks with a limited Lifetime Warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e Specs:\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eInitial Lowering: Around 30mm.\u003c\/li\u003e\n\u003cli\u003eAdjustment Range: 20mm\u003c\/li\u003e\n\u003cli\u003eSpring Rates: 450 lbs\/in Front, 400 lbs\/in Rear\u003c\/li\u003e\n\u003cli\u003eTop Hats Included: No, reuse OEM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":31125763358822,"sku":"48-086424","price":2399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/bilstein-b16-performance-suspension-system-mitsubishi-evo-8-9-2003-2006-coilovers-bilstein-48-086424.jpg?v=1614520414"},{"product_id":"bilstein-46mm-front-b6-monotube-strut-assembly-mitsubishi-evo-8-9-2003-2006","title":"Bilstein [03-06 Mitsubishi EVO 8\/9] 46mm Front B6 Monotube Strut Assembly","description":"\u003cp\u003eThe original copy of each proposal: the first mono-tube gas pressure shock absorbers bore the BILSTEIN, and the best is still to come from us. BILSTEIN's mono-tube is the technique of choice in motorsports and production sports car, because only gives engineers the freedom to choose the perfect installation location (eg upside-down technique). \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e \u003cbr\u003eDamper tube in steel or aluminum hartcoartiertem \u003cbr\u003eWhen aluminum 30% higher heat dissipation and extremely low weight and excellent durability \u003cbr\u003eLarger effective area of the power piston for higher damping power and better handling \u003cbr\u003eImproved dissipation of thermal energy to the outside allows a constant high performance of the damper \u003cbr\u003eSturdy structure for safety in Upside-down technique\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice is per strut. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":31125765259366,"sku":"35-118435","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/bilstein-46mm-front-b6-monotube-strut-assembly-mitsubishi-evo-8-9-2003-2006-shocks-and-struts-bilstein-35-118435.jpg?v=1614520433"},{"product_id":"bilstein-46mm-rear-b6-monotube-strut-assembly-mitsubishi-evo-8-9-2003-2006","title":"Bilstein 46mm Rear B6 Monotube Strut Assembly Mitsubishi EVO 8 \/ 9 2003-2006","description":"\u003cp\u003eThe original copy of each proposal: the first mono-tube gas pressure shock absorbers bore the BILSTEIN, and the best is still to come from us. BILSTEIN's mono-tube is the technique of choice in motorsports and production sports car, because only gives engineers the freedom to choose the perfect installation location (eg upside-down technique). \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e \u003cbr\u003eDamper tube in steel or aluminum hartcoartiertem \u003cbr\u003eWhen aluminum 30% higher heat dissipation and extremely low weight and excellent durability \u003cbr\u003eLarger effective area of the power piston for higher damping power and better handling \u003cbr\u003eImproved dissipation of thermal energy to the outside allows a constant high performance of the damper \u003cbr\u003eSturdy structure for safety in Upside-down technique\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrice is per strut. \u003c\/strong\u003e\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":31125766176870,"sku":"24-118446","price":205.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/bilstein-46mm-rear-b6-monotube-strut-assembly-mitsubishi-evo-8-9-2003-2006-shocks-and-struts-bilstein-24-118446.jpg?v=1614520439"},{"product_id":"bc-racing-br-series-coilover-kit-mitsubishi-evo-7-8-9-2001-2007","title":"BC Racing [01-07 Mitsubishi EVO 7 \/ 8 \/ 9] BR Series Coilover Kit","description":"\u003cp\u003eThe BC Racing BR Series Coilover Kit is a full coilover suspension set for the 2001-2007 Mitsubishi EVO 7 \/ 8 \/ 9, designed for street driving with occasional track use. It offers 30 levels of damping adjustment (compression\/rebound), ride height adjustment through the shock body independent of spring preload, and mono-tube shock design.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: B-08-BR\u003c\/li\u003e\n\u003cli\u003eMounts: (F) Pillow Ball (R) Rubber\u003c\/li\u003e\n\u003cli\u003eSpring rates: (F) 7kg\/mm (R) 8kg\/mm\u003c\/li\u003e\n\u003cli\u003e53mm dampers\u003c\/li\u003e\n\u003cli\u003eMono-tube shock design\u003c\/li\u003e\n\u003cli\u003eFixed cup \/ locking collar design\u003c\/li\u003e\n\u003cli\u003eFull height adjustability through the shock body (not spring)\u003c\/li\u003e\n\u003cli\u003e30 levels of damping adjustment (compression\/rebound)\u003c\/li\u003e\n\u003cli\u003eCustom spring rates available, as well as a Swift spring upgrade (upon request)\u003c\/li\u003e\n\u003cli\u003e1 year warranty against manufacturer defect\u003c\/li\u003e\n\u003cli\u003eCompletely rebuildable, and individual parts are available separately for purchase\u003c\/li\u003e\n\u003cli\u003eFull set included - 4 coilovers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOptional rear extenders are also offered; they allow the damping range to be changed without removing the rear seat every time.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQuestions \u0026amp; Answers\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Does this coilover kit fit my 2001-2007 Mitsubishi EVO 7 \/ 8 \/ 9?\u003c\/strong\u003e\u003cbr\u003eA: Yes. This BC Racing BR Series kit, part number B-08-BR, is made for the 2001-2007 Mitsubishi EVO 7 \/ 8 \/ 9. Verify your exact year and model before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The box includes a full set of 4 BC Racing BR Series coilovers for the 2001-2007 Mitsubishi EVO 7 \/ 8 \/ 9.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: How is ride height adjusted on this kit?\u003c\/strong\u003e\u003cbr\u003eA: Ride height is adjusted through the shock body, not the spring, so height can be set independently of spring preload.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: How much damping adjustment does this kit have?\u003c\/strong\u003e\u003cbr\u003eA: This kit has 30 levels of damping adjustment for compression and rebound.\u003c\/p\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":31155709902950,"sku":"B-08-BR","price":1195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/bc-racing-br-series-coilover-kit-mitsubishi-evo-7-8-9-2001-2007-coilovers-bc-racing-b-08-br.jpg?v=1614526675"},{"product_id":"bc-racing-inverted-rm-series-coilover-kit-lancer-evolution-8-9-2003-2006","title":"BC Racing [03-06 Lancer Evolution 8\/9] RM Series Inverted Coilover Kit","description":"\u003cp\u003eThe BC Racing RM Series Inverted Coilover Kit is a full inverted coilover suspension set for the 2003-2006 Mitsubishi Lancer Evolution 8 \/ 9, designed for road course, hill climb and tarmac rally use. The inverted design moves the vital damper fluid away from heat sources to avoid overheating and damper fade under extreme conditions, handles high-g loads, and reduces unsprung weight by moving the heavy parts to the chassis mounting points.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: B-03-RM\u003c\/li\u003e\n\u003cli\u003eMounts: Camber plate front, rubber or OEM rear\u003c\/li\u003e\n\u003cli\u003eSpring rates: Front 7K, Rear 8K\u003c\/li\u003e\n\u003cli\u003eInverted mono-tube shock design\u003c\/li\u003e\n\u003cli\u003eHeight adjustable via the shock body, not the spring\u003c\/li\u003e\n\u003cli\u003e30 levels of damping force adjustment (compression\/rebound)\u003c\/li\u003e\n\u003cli\u003eFront and rear camber plates available on applicable kits\u003c\/li\u003e\n\u003cli\u003eCustom spring rates and Swift springs available for most applications\u003c\/li\u003e\n\u003cli\u003eCustom valving, and valving paired for custom spring rates, available\u003c\/li\u003e\n\u003cli\u003e1 year warranty against manufacturer defect\u003c\/li\u003e\n\u003cli\u003eFully rebuildable, with all parts available for purchase\u003c\/li\u003e\n\u003cli\u003eComes with a full set of 4 coilovers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDoes this fit my 2003-2006 Mitsubishi Lancer Evolution 8 \/ 9? Yes — this kit (part number B-03-RM) is made for the 2003-2006 Mitsubishi Lancer Evolution 8 \/ 9. Confirm the part number matches your vehicle before ordering.\u003c\/li\u003e\n\u003cli\u003eWhat is included in the box? A full set of 4 coilovers.\u003c\/li\u003e\n\u003cli\u003eCan I order custom spring rates? Yes — custom spring rates and Swift springs are available for most applications.\u003c\/li\u003e\n\u003cli\u003eAre these coilovers rebuildable? Yes — the kit is fully rebuildable and all parts are available for purchase.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BC Racing","offers":[{"title":"Default Title","offer_id":31155722420326,"sku":"B-03-RM","price":1495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/bc-racing-inverted-rm-series-coilover-kit-lancer-evolution-8-9-2003-2006-coilovers-bc-racing-b-03-rm.jpg?v=1614526753"},{"product_id":"h-r-27mm-rear-adj-sway-bar-mitsubishi-evo-8-9-2003-2006","title":"H\u0026R [03-06 EVO 8 \/ EVO 9] 27mm Adjustable Rear Sway Bar","description":"\u003cp\u003eThe H\u0026amp;R 27mm Adjustable Rear Sway Bar (part number 71210) fits the 2003-2006 Mitsubishi Evolution 8 and Evolution 9 and reduces body roll while improving lateral stability and cornering grip. H\u0026amp;R Sport Sway Bars are crafted from the highest tensile strength steel available, a proprietary (hf) 50CrV4 steel alloy. This design guarantees a smooth transitional sway bar function, decreasing feedback response time and increasing stiffness. H\u0026amp;R Sport Sway Bars will reduce body roll while improving lateral stability and cornering grip. Each H\u0026amp;R Sport Sway Bar is cold-formed and heat-treated, and the H\u0026amp;R shot-peen process ensures durability and dimensional accuracy before a series of rigorous quality control tests. All H\u0026amp;R sway bars include their exclusive urethane\/Teflon grease-less composite sway bar bushings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 71210\u003c\/li\u003e\n\u003cli\u003ePosition: Rear\u003c\/li\u003e\n\u003cli\u003eDiameter: 27mm\u003c\/li\u003e\n\u003cli\u003eAdjustable: Yes\u003c\/li\u003e\n\u003cli\u003eMaterial: (hf) 50CrV4 steel alloy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 H\u0026amp;R 27mm adjustable rear sway bar\u003c\/li\u003e\n\u003cli\u003eUrethane\/Teflon grease-less composite sway bar bushings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eActual bars may differ from photo.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this fit my 2003-2006 Mitsubishi Evolution 8 or Evolution 9?\u003c\/strong\u003e\u003cbr\u003eA: Yes — this rear sway bar is listed for the 2003-2006 Mitsubishi Evolution 8 and Evolution 9. Confirm your exact year and model before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The box includes 1 H\u0026amp;R 27mm adjustable rear sway bar and urethane\/Teflon grease-less composite sway bar bushings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":31172556128358,"sku":"hr71210","price":341.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/hr-27mm-rear-adj-sway-bar-mitsubishi-evo-8-9-2003-2006-71210-sway-bars-hr-hr71210.jpg?v=1614528399"},{"product_id":"h-r-25mm-front-adj-sway-bar-mitsubishi-evo-8-9-2003-2006","title":"H\u0026R [03-06 EVO 8 \/ EVO 9] 25mm Adjustable Front Sway Bar","description":"\u003cp\u003eThe H\u0026amp;R 25mm Adjustable Front Sway Bar (part number 70210) fits the 2003-2006 Mitsubishi Evolution 8 and Evolution 9 and reduces body roll while improving lateral stability and cornering grip. H\u0026amp;R Sport Sway Bars are crafted from the highest tensile strength steel available, a proprietary (hf) 50CrV4 steel alloy. This design guarantees a smooth transitional sway bar function, decreasing feedback response time and increasing stiffness. H\u0026amp;R Sport Sway Bars will reduce body roll while improving lateral stability and cornering grip. Each H\u0026amp;R Sport Sway Bar is cold-formed and heat-treated, and the H\u0026amp;R shot-peen process ensures durability and dimensional accuracy before a series of rigorous quality control tests. All H\u0026amp;R sway bars include their exclusive urethane\/Teflon grease-less composite sway bar bushings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 70210\u003c\/li\u003e\n\u003cli\u003ePosition: Front\u003c\/li\u003e\n\u003cli\u003eDiameter: 25mm\u003c\/li\u003e\n\u003cli\u003eAdjustable: Yes\u003c\/li\u003e\n\u003cli\u003eMaterial: (hf) 50CrV4 steel alloy\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWhat's Included\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 H\u0026amp;R 25mm adjustable front sway bar\u003c\/li\u003e\n\u003cli\u003eUrethane\/Teflon grease-less composite sway bar bushings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment Notes\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eActual bars may differ from photo.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this fit my 2003-2006 Mitsubishi Evolution 8 or Evolution 9?\u003c\/strong\u003e\u003cbr\u003eA: Yes — this front sway bar is listed for the 2003-2006 Mitsubishi Evolution 8 and Evolution 9. Confirm your exact year and model before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The box includes 1 H\u0026amp;R 25mm adjustable front sway bar and urethane\/Teflon grease-less composite sway bar bushings.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":31172556161126,"sku":"hr70210","price":332.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/hr-25mm-front-adj-sway-bar-mitsubishi-evo-8-9-2003-2006-70210-sway-bars-hr-hr70210.jpg?v=1614528399"},{"product_id":"h-r-sport-lowering-springs-mitsubishi-evolution-8-9-non-mr-2003-2006","title":"H\u0026R [03-06 EVO 8 \/ EVO 9] Sport Lowering Springs - Non-MR","description":"\u003cp\u003eH\u0026amp;R Sport Lowering Springs (part number 52907) for the 2003-2006 Mitsubishi Evolution 8 and Evolution 9 (non-MR) lower the vehicle and reduce fender gap for an aggressive performance look. All H\u0026amp;R springs are crafted from a proprietary (hf) 54SiCr6 spring steel to ensure premium quality and performance. For maximum durability as well as longevity, all H\u0026amp;R springs are precision shot-peened prior to release, a special process developed to increase spring life by more than 200%. H\u0026amp;R develops designs and tests all of their products in-house and each spring is quality tested before leaving H\u0026amp;R's ISO9001 certified production facility in Germany. H\u0026amp;R Sport Springs offer an enhanced look by reducing your vehicle's fender gap, resulting in an aggressive performance look. The stiffer springs will increase cornering stability, reduce body roll and provide a much more exciting driving experience.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 52907\u003c\/li\u003e\n\u003cli\u003eLowering: Front: 1.4\" \/ Rear: 1.3\"\u003c\/li\u003e\n\u003cli\u003eMaterial: (hf) 54SiCr6 spring steel\u003c\/li\u003e\n\u003cli\u003ePrecision shot-peened for durability and longevity\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and tested in-house by H\u0026amp;R\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this fit my 2003-2006 Mitsubishi Evolution 8 and Evolution 9 (non-MR)?\u003c\/strong\u003e\u003cbr\u003eA: Yes — this spring set is listed for the 2003-2006 Mitsubishi Evolution 8 and Evolution 9 (non-MR). Confirm your exact year, model and trim against the fitment notes before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How much does it lower the vehicle?\u003c\/strong\u003e\u003cbr\u003eA: Front: 1.4\" \/ Rear: 1.3\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The box includes the H\u0026amp;R Sport Spring set for this application.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":31172556193894,"sku":"hr52907","price":296.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/hr-sport-lowering-springs-mitsubishi-evolution-8-9-non-mr-2003-2006-52907-lowering-springs-hr-hr52907.jpg?v=1614528400"},{"product_id":"h-r-sport-lowering-springs-mitsubishi-evolution-8-9-mr-only","title":"H\u0026R [03-06 EVO 8 \/ EVO 9] Sport Lowering Springs - MR","description":"\u003cp\u003eH\u0026amp;R Sport Lowering Springs (part number 29297-2) for the 2003-2006 Mitsubishi Evolution 8 and Evolution 9 MR lower the vehicle and reduce fender gap for an aggressive performance look. All H\u0026amp;R springs are crafted from a proprietary (hf) 54SiCr6 spring steel to ensure premium quality and performance. For maximum durability as well as longevity, all H\u0026amp;R springs are precision shot-peened prior to release, a special process developed to increase spring life by more than 200%. H\u0026amp;R develops designs and tests all of their products in-house and each spring is quality tested before leaving H\u0026amp;R's ISO9001 certified production facility in Germany. H\u0026amp;R Sport Springs offer an enhanced look by reducing your vehicle's fender gap, resulting in an aggressive performance look. The stiffer springs will increase cornering stability, reduce body roll and provide a much more exciting driving experience.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: 29297-2\u003c\/li\u003e\n\u003cli\u003eLowering: Front: 1.4\" \/ Rear: 1.2\"\u003c\/li\u003e\n\u003cli\u003eMaterial: (hf) 54SiCr6 spring steel\u003c\/li\u003e\n\u003cli\u003ePrecision shot-peened for durability and longevity\u003c\/li\u003e\n\u003cli\u003eDesigned, developed and tested in-house by H\u0026amp;R\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: Does this fit my 2003-2006 Mitsubishi Evolution 8 and Evolution 9 MR?\u003c\/strong\u003e\u003cbr\u003eA: Yes — this spring set is listed for the 2003-2006 Mitsubishi Evolution 8 and Evolution 9 MR. Confirm your exact year, model and trim against the fitment notes before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: How much does it lower the vehicle?\u003c\/strong\u003e\u003cbr\u003eA: Front: 1.4\" \/ Rear: 1.2\".\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQ: What is included in the box?\u003c\/strong\u003e\u003cbr\u003eA: The box includes the H\u0026amp;R Sport Spring set for this application.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":31172556259430,"sku":"hr29297-2","price":296.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/hr-sport-lowering-springs-mitsubishi-evolution-8-9-mr-only-29297-2-lowering-springs-hr-hr29297-2.jpg?v=1614528401"},{"product_id":"tein-pillowball-upper-rear-non-adj-mounts-mitsubishi-evo-8-9-2003-2006","title":"Tein [03-06 Mitsubishi EVO 8 + 9] Pillowball Upper Rear Non-Adj. Mounts","description":"\u003cp\u003eTein Pillowball Upper Rear Mounts for the Mitsubishi EVO 8 + 9 2003-2006 are designed for vehicle specific applications, keeping the positioning of the shock absorber shaft as close to stock as possible while offering drastic performance improvement. By replacing the rubber stock mounts with pillowball mounts, the driver gets a more positive connection between chassis and body and there is less flex, which means more consistency and grip.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: PRR29-31S65\u003c\/li\u003e\n\u003cli\u003eSpherical bearings made by NMB\u003c\/li\u003e\n\u003cli\u003eSeats constructed from aircraft-grade aluminum for maximum strength and light weight\u003c\/li\u003e\n\u003cli\u003eRear mounts are not adjustable\u003c\/li\u003e\n\u003cli\u003ePre-installed elongated studs fit in the OEM mounting holes and leave enough thread for aftermarket strut bars\u003c\/li\u003e\n\u003cli\u003eDesigned to work with the stock Evo suspension or with Tein Basic or SS coilover systems; fitment with other aftermarket suspension systems is not guaranteed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Mitsubishi EVO 8 or EVO 9?\u003c\/strong\u003e Yes. These Tein Pillowball Upper Mounts are listed for the Mitsubishi EVO 8 + 9 2003-2006.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWill these work with my suspension?\u003c\/strong\u003e They are designed to work with the stock Evo suspension or with Tein Basic or SS coilover systems; fitment with other aftermarket suspension systems is not guaranteed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the rear mount adjustable?\u003c\/strong\u003e The front mounts are camber adjustable and the rear mounts are not adjustable.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":31173316083814,"sku":"teinPRR29-31S65","price":275.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/tein-pillowball-upper-rear-non-adj-mounts-mitsubishi-evo-8-9-2003-2006-strut-mounts-and-camber-plates-tein-teinprr29-31s65.jpg?v=1614532950"},{"product_id":"tein-pillowball-upper-front-adj-mounts-mitsubishi-evo-8-9-2003-2006","title":"Tein [03-06 Mitsubishi EVO 8 + 9] Pillowball Upper Front Adj. Mounts","description":"\u003cp\u003eTein Pillowball Upper Front Mounts for the Mitsubishi EVO 8 + 9 2003-2006 are designed for vehicle specific applications, keeping the positioning of the shock absorber shaft as close to stock as possible while offering drastic performance improvement. By replacing the rubber stock mounts with pillowball mounts, the driver gets a more positive connection between chassis and body and there is less flex, which means more consistency and grip.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: PAR52-31PFR\u003c\/li\u003e\n\u003cli\u003eSpherical bearings made by NMB\u003c\/li\u003e\n\u003cli\u003eSeats constructed from aircraft-grade aluminum for maximum strength and light weight\u003c\/li\u003e\n\u003cli\u003eFront mounts are camber adjustable\u003c\/li\u003e\n\u003cli\u003ePre-installed elongated studs fit in the OEM mounting holes and leave enough thread for aftermarket strut bars\u003c\/li\u003e\n\u003cli\u003eDesigned to work with the stock Evo suspension or with Tein Basic or SS coilover systems; fitment with other aftermarket suspension systems is not guaranteed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Mitsubishi EVO 8 or EVO 9?\u003c\/strong\u003e Yes. These Tein Pillowball Upper Mounts are listed for the Mitsubishi EVO 8 + 9 2003-2006.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWill these work with my suspension?\u003c\/strong\u003e They are designed to work with the stock Evo suspension or with Tein Basic or SS coilover systems; fitment with other aftermarket suspension systems is not guaranteed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the front mount adjustable?\u003c\/strong\u003e Yes. The front mounts are camber adjustable, enabling quick adjustments for different suspension settings and tire conditions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":31173316116582,"sku":"teinPAR52-31PFR","price":216.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/tein-pillowball-upper-front-adj-mounts-mitsubishi-evo-8-9-2003-2006-strut-mounts-and-camber-plates-tein-teinpar52-31pfr.jpg?v=1614532951"},{"product_id":"tein-h-tech-lowering-springs-mitsubishi-evo-8-9-2003-2006","title":"Tein [03-06 Mitsubishi EVO 8 + 9] H.Tech Lowering Springs","description":"\u003cp\u003eTein H.Tech Lowering Springs for the 2003-2006 Mitsubishi Evolution 8 and 9 (except MR) utilize the latest spring and material technology to optimize comfort, performance, and quality, designed and tested in North America to be used in conjunction with OEM or similar shocks for excellent ride comfort and slightly increased handling.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SKR84-BUB00\u003c\/li\u003e\n\u003cli\u003eSpring Rate: Front 196 \/ Rear 268\u003c\/li\u003e\n\u003cli\u003eDrop: Front -1.4in \/ Rear -0.3in\u003c\/li\u003e\n\u003cli\u003eProduced with Vanadium (SAE9254V), which is durable, lightweight, and has properties to retain more spring stroke\u003c\/li\u003e\n\u003cli\u003eFitment: Mitsubishi Evolution 8 \u0026amp; 9 2003-2006, except MR\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2003-2006 Mitsubishi Evolution 8 or 9?\u003c\/strong\u003e Yes, except the MR. These Tein H.Tech Lowering Springs are listed for the Mitsubishi Evolution 8 \u0026amp; 9 2003-2006, except MR.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I use these springs with OEM shocks?\u003c\/strong\u003e Yes. They are designed and tested in North America to be used in conjunction with OEM or similar shocks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow much do these springs lower the car?\u003c\/strong\u003e The drop is Front -1.4in and Rear -0.3in, with spring rates of Front 196 and Rear 268.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":31173317984358,"sku":"teinSKR84-BUB00","price":200.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/tein-h-tech-lowering-springs-mitsubishi-evo-8-9-2003-2006-lowering-springs-tein-teinskr84-bub00.jpg?v=1614532973"},{"product_id":"tein-s-tech-lowering-springs-mitsubishi-evo-8-9-non-mr-2003-2006","title":"Tein [03-06 Mitsubishi EVO 8 + 9] S.Tech Lowering Springs","description":"\u003cp\u003eTein S.Tech Lowering Springs for the 2003-2006 Mitsubishi Evolution 8 and 9 are an excellent step towards suspension tuning, offering a more aggressive appearance and increased road holding capability, designed to be used with OEM or OEM replacement shocks and road tested in North America for the proper balance between performance and comfort.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SKR84-AUB00\u003c\/li\u003e\n\u003cli\u003eNon MR: Spring Rates - Front 210 \/ Rear 290 \u0026amp; Drop - Front -2.01in \/ Rear -0.87in\u003c\/li\u003e\n\u003cli\u003eMR: Spring Rates - Front 213 \/ Rear 291 \u0026amp; Drop - Front -1.8in \/ Rear -0.8in\u003c\/li\u003e\n\u003cli\u003eFitment: Mitsubishi Evolution 8 \u0026amp; 9 2003-2006\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2003-2006 Mitsubishi Evolution 8 or 9?\u003c\/strong\u003e Yes. These Tein S.Tech Lowering Springs are listed for the Mitsubishi Evolution 8 \u0026amp; 9 2003-2006.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan I use these springs with OEM shocks?\u003c\/strong\u003e Yes. They are designed to be used with OEM or OEM replacement shocks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow much do these springs lower the car?\u003c\/strong\u003e For Non MR models the drop is Front -2.01in and Rear -0.87in; for MR models the drop is Front -1.8in and Rear -0.8in.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":31173318017126,"sku":"teinSKR84-AUB00","price":183.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/tein-s-tech-lowering-springs-mitsubishi-evo-8-9-non-mr-2003-2006-lowering-springs-tein-teinskr84-aub00.jpg?v=1614532974"},{"product_id":"tein-mono-flex-coilovers-mitsubishi-evo-8-9-2003-2006","title":"Tein [03-06 Mitsubishi EVO 8\/9] Mono Flex Coilovers","description":"\u003cp\u003eTein Mono Flex coilovers for the 2003-2005 Mitsubishi EVO 8 and 2006 Mitsubishi EVO 9 are designed for the best performance on the street and track, with full ride height adjustment and 16 levels of damping. The mono-tube internal damper design allows quick heat dissipation for consistent handling and a larger damping range, and the coilovers include upper mounts, are compatible with the electronic damping force computer (EDFC), and are fully rebuildable.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: GSR84-FUSS1\u003c\/li\u003e\n\u003cli\u003eMono-tube internal damper design\u003c\/li\u003e\n\u003cli\u003eSpring Rate: Front 783 lb\/in (14 kgf\/mm) \/ Rear 559 lb\/in (10 kgf\/mm)\u003c\/li\u003e\n\u003cli\u003eRide Height Adjustment Range: Front -0.9 to -2.9 in (-24 to -74 mm) \/ Rear 0.6 to -2.9 in (14 to -74.4 mm)\u003c\/li\u003e\n\u003cli\u003eUpper Mounts: Pillowball upper mount\u003c\/li\u003e\n\u003cli\u003eAdjustability: full ride height adjustment and 16 levels of damping\u003c\/li\u003e\n\u003cli\u003eEDFC Compatibility: Yes\u003c\/li\u003e\n\u003cli\u003eFully rebuildable\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2003-2006 Mitsubishi EVO 8 or EVO 9?\u003c\/strong\u003e Yes. This Tein Mono Flex coilover kit, part number GSR84-FUSS1, is made for the 2003-2005 Mitsubishi EVO 8 and the 2006 Mitsubishi EVO 9.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes the Mono Flex coilovers with pillowball upper mounts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow is this installed?\u003c\/strong\u003e Ride height is fully adjustable and damping has 16 levels of adjustment; the kit is EDFC compatible and fully rebuildable.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":31173319131238,"sku":"teinGSR84-FUSS1","price":2125.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/tein-mono-flex-coilovers-mitsubishi-evo-89-2003-2006-coilovers-tein-teingsr84-fuss1.jpg?v=1614532984"},{"product_id":"tein-mono-sport-coilover-kit-mitsubishi-evo-8-9-2003-2006","title":"Tein [03-06 Mitsubishi EVO 8 + 9] Mono Sport Coilovers","description":"\u003cp\u003eTein Mono Sport Coilovers for the 2003-2006 Mitsubishi Evolution 8 and 9 are developed to provide driving pleasure to all drivers, with settings focused on sport driving for cars often running on circuit and touring settings where comfortable ride is the priority.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: GSR52-71SS4\u003c\/li\u003e\n\u003cli\u003e16-level damping force adjustment\u003c\/li\u003e\n\u003cli\u003eFull-length ride height adjustment via the twin adjustment mechanism, which centers the damper to accommodate spring\/ride height\u003c\/li\u003e\n\u003cli\u003eUpper Mounts: adjustable pillowball front, pillowball rear\u003c\/li\u003e\n\u003cli\u003eSpring Rate: Front 12kg\/mm, 672lb\/in \/ Rear 10kg\/mm, 560lb\/in\u003c\/li\u003e\n\u003cli\u003eAdjustment Range: Front -0.6in to -4.4in \/ Rear -1.0in to -3.5in\u003c\/li\u003e\n\u003cli\u003eEDFC Compatibility: yes\u003c\/li\u003e\n\u003cli\u003eKits come in complete front and rear sets\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2003-2006 Mitsubishi Evolution 8 or 9?\u003c\/strong\u003e Yes. This Tein Mono Sport Coilover kit, part number GSR52-71SS4, is listed for the Mitsubishi Evolution 8 \u0026amp; 9 2003-2006.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the damping adjustable?\u003c\/strong\u003e Yes. The Mono Sport features 16-level damping force adjustment and top camber adjustment plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included in the box?\u003c\/strong\u003e The kit comes as a complete front and rear set with adjustable pillowball front upper mounts and pillowball rear upper mounts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs this EDFC compatible?\u003c\/strong\u003e Yes. The Mono Sport kits are compatible with the EDFC Series to enable in-car damping force adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":31173324406886,"sku":"teinGSR52-71SS4","price":1990.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/tein-mono-sport-coilover-kit-mitsubishi-evo-8-9-2003-2006-coilovers-tein-teingsr52-71ss4.jpg?v=1614533013"},{"product_id":"tein-flex-z-coilover-kit-mitsubishi-evo-8-9-2003-2006","title":"Tein [03-06 Mitsubishi EVO 8 + 9] Flex Z Coilovers","description":"\u003cp\u003eTein Flex Z Coilovers for the 2003-2006 Mitsubishi Evolution 8 and 9 are a high quality, full height adjustable coilover kit with a twin-tube design and a 16-level Linear Damping Force Adjustment System, designed for a direct install at an affordable price.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: VSR84-C1SS4\u003c\/li\u003e\n\u003cli\u003eTwin-tube design, full height adjustable\u003c\/li\u003e\n\u003cli\u003e16-level Linear Damping Force Adjustment System\u003c\/li\u003e\n\u003cli\u003eSpring Rate: Front 10k, 560 \/ Rear 8k, 448\u003c\/li\u003e\n\u003cli\u003eUpper Mounts Included — the Flex Z comes out of the box with complete upper mount kits for easy installation\u003c\/li\u003e\n\u003cli\u003eAdjustment Range: Front -0.1in to -3.8in \/ Rear -1.0in to -2.8in\u003c\/li\u003e\n\u003cli\u003eEDFC Compatibility: Yes\u003c\/li\u003e\n\u003cli\u003eNo-Sag Springs\u003c\/li\u003e\n\u003cli\u003eCoated with rust-proofing, with highly rigid brackets and shell casing and high-spec damper oil\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2003-2006 Mitsubishi Evolution 8 or 9?\u003c\/strong\u003e Yes. This Tein Flex Z Coilover kit, part number VSR84-C1SS4, is listed for the Mitsubishi Evolution 8 \u0026amp; 9 2003-2006.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs the damping adjustable?\u003c\/strong\u003e Yes. The Flex Z has a 16-level Linear Damping Force Adjustment System and is compatible with TEIN's EDFC controllers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included in the box?\u003c\/strong\u003e The Flex Z comes out of the box with complete upper mount kits for easy installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs this EDFC compatible?\u003c\/strong\u003e Yes. The Flex Z is compatible with TEIN's EDFC controllers for handling control from within the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":31173324472422,"sku":"teinVSR84-C1SS4","price":1090.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/tein-flex-z-coilover-kit-mitsubishi-evo-8-9-2003-2006-coilovers-tein-teinvsr84-c1ss4.jpg?v=1614533014"},{"product_id":"tein-street-basis-coilover-kit-mitsubishi-evo-8-evo-9-2003-2006","title":"Tein [03-06 Mitsubishi EVO 8 + 9] Street Basis Z Coilovers","description":"\u003cp\u003eTein Street Basis Z Coilovers for the 2003-2006 Mitsubishi Evolution 8 and 9 are Tein's entry level height adjustable coilovers, designed to provide the feeling of a sports suspension with an aggressive stance, with a shortened shell case that provides optimum damper stroke at a low vehicle height. Made in Japan.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: GSR52-8USS2\u003c\/li\u003e\n\u003cli\u003eSteel Construction\u003c\/li\u003e\n\u003cli\u003eNo Sag Springs\u003c\/li\u003e\n\u003cli\u003eTwin Tube Internal Design\u003c\/li\u003e\n\u003cli\u003ePowder Coated Damper Body\u003c\/li\u003e\n\u003cli\u003eNon-welded ZT coated Adjustment Tube\u003c\/li\u003e\n\u003cli\u003eFull Length Dust Boots (some models re-use OEM dust boots)\u003c\/li\u003e\n\u003cli\u003e1-piece Aluminum Spring Seat with Delrin Thrust Washer\u003c\/li\u003e\n\u003cli\u003eStreet Basis Z coilovers are non-rebuildable and are strictly ride height adjustable\u003c\/li\u003e\n\u003cli\u003eUses the factory upper mounts to complete the installation\u003c\/li\u003e\n\u003cli\u003eWhat's Included: 4 TEIN Coilover Shocks, 4 TEIN Coilover Springs (no sag version), 4 Rubber Bump Stops, 2 Hook Spanners, 4 Spring Seats, 4 Spring Locks, 4 Dust Covers (some kits reuse stock dust covers), 4 Delrin Thrust Washers, 1 TEIN Sticker Sheet, 1 Instruction Manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2003-2006 Mitsubishi Evolution 8 and 9?\u003c\/strong\u003e Yes. This Tein Street Basis Z Coilover kit, part number GSR52-8USS2, is listed for the 2003-2006 Mitsubishi Evolution 8 and 9.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAre these coilovers damping adjustable?\u003c\/strong\u003e No. Street Basis Z is strictly a ride height adjustable kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat's included in the box?\u003c\/strong\u003e The kit includes 4 coilover shocks, 4 coilover springs, 4 rubber bump stops, 2 hook spanners, 4 spring seats, 4 spring locks, 4 dust covers, 4 Delrin thrust washers, a sticker sheet and an instruction manual.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAre these coilovers rebuildable?\u003c\/strong\u003e No. The Street Basis Z coilovers are non-rebuildable.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":31173324537958,"sku":"teinGSR52-8USS2","price":770.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/tein-street-basis-z-coilover-kit-mitsubishi-evo-8-evo-9-2003-2006-coilovers-tein-teingsr52-8uss2.jpg?v=1614533016"},{"product_id":"tein-s-tech-lowering-springs-mitsubishi-evo-8-9-mr-only-2003-2006","title":"Tein [03-06 Mitsubishi EVO 8, EVO 9 MR] S.Tech Lowering Springs","description":"\u003cp\u003eTein S.Tech lowering springs for the Mitsubishi EVO 8 and EVO 9 MR offer a more aggressive appearance and increased road holding capability, and are designed to be used with OEM or OEM replacement shocks. Each application is road tested in North America for the proper balance between performance and comfort.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart Number: SKR94-AUB00\u003c\/li\u003e\n\u003cli\u003eMR models only\u003c\/li\u003e\n\u003cli\u003eSpring Rates - Front: 213 \/ Rear: 291\u003c\/li\u003e\n\u003cli\u003eDrop - Front: 1.8in \/ Rear: .8in\u003c\/li\u003e\n\u003cli\u003eDesigned to be used with OEM or OEM replacement shocks\u003c\/li\u003e\n\u003cli\u003eRoad tested in North America\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ\u0026amp;A\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my Mitsubishi EVO 8 or EVO 9?\u003c\/strong\u003e This kit, part number SKR94-AUB00, is for MR models only; check that your EVO 8 or EVO 9 is an MR before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit is a full set of Tein S.Tech lowering springs for the front and rear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat are the spring rates and drop?\u003c\/strong\u003e The MR application lists spring rates of 213 front and 291 rear, with a drop of 1.8in front and .8in rear.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tein","offers":[{"title":"Default Title","offer_id":31173325160550,"sku":"teinSKR94-AUB00","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/tein-s-tech-lowering-springs-mitsubishi-evo-8-9-mr-only-2003-2006-lowering-springs-tein-teinskr94-aub00.jpg?v=1614533024"}],"url":"https:\/\/jdmuscleusa.com\/collections\/2003-2005-mitsubishi-evo-8-suspension.oembed?page=6","provider":"JDMuscle","version":"1.0","type":"link"}