{"title":"2000-2003 Honda S2000 Pistons and Sleeves","description":"\u003cp\u003eShop pistons and sleeves for the 2000-2003 Honda S2000. You'll find pistons and sleeves parts and upgrades selected for 2000-2003 S2000 fitment, from daily-driver upgrades to more focused build parts. Continue with the Engine Builds collection, the Engine collection, or the related S2000 collections below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShop related\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2000-2003-honda-s2000-engine-builds\"\u003e00-03 S2000 Engine Builds\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2000-2003-honda-s2000-engine\"\u003e00-03 S2000 Engine\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2000-2003-honda-s2000\"\u003e00-03 S2000\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2000-2003-honda-s2000-clutches\"\u003e00-03 S2000 Clutches\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2000-2003-honda-s2000-brake-rotors\"\u003e00-03 S2000 Brake Rotors\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2000-2003-honda-s2000-coilovers\"\u003e00-03 S2000 Coilovers\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2000-2003-honda-s2000-brake-pads\"\u003e00-03 S2000 Brake Pads\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/2000-2003-honda-s2000-cat-back-exhaust-system\"\u003e00-03 S2000 Cat Back Exhaust System\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"cp-87-5mm-bore-12-5-compression-pistons-rings-for-00-03-honda-s2000","title":"CP 87.5mm Bore 12:5 Compression Pistons \u0026 Rings for 00-03 Honda S2000","description":"\u003cp\u003eWhen building your bottom end, you need a quality piston that can handle boost and maximum horsepower. CP forged pistons feature superb ring seal, higher vacuum, lower blow-by, greater durability and increased horsepower and torque through the power band. Better yet, peak horsepower is retained through the life of the piston rings. This is achieved by lightweight forgings and CP's exclusive machining techniques and processes. CP's commitment to racing is reflected in every piston they produce.\u003c\/p\u003e\n\u003cp\u003eCP is dedicated to superior engineering, utilizing the latest forging techniques and CNC machinery and backing it up with rigorous quality control makes for a top-notch product every time that emphasizes performance and reliability. CP has some of the highest quality control standards in the industry. CP is a division of Pankl Racing Systems, a high-technology racing group supplying engine and suspension components to numerous Formula One, F3000, IRL, CART, World Rally Racing teams and to such elite companies as Ferrari and Porsche. You will not find a finer piston for your 00-09 S2000\u003c\/p\u003e\n\u003cp\u003eCP offers optional coatings to enhance the effectiveness of your pistons. The top coating is designed to reflect heat into the combustion chamber, thereby increasing exhaust gas velocity and greatly improving scavenging potential. The skirt coating offers additional lubricant in times of extreme heat or heavy wear situations. The coating is designed to reduce friction on the skirt by providing a buffer to the cylinder. Coating options are applied to the entire set and add 4-6 weeks to the order time.\u003c\/p\u003e\n\u003cp\u003e Features:\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh strength aluminum forging\u003c\/li\u003e\n\u003cli\u003eLightweight design\u003c\/li\u003e\n\u003cli\u003eCNC machined to 1 gram\u003c\/li\u003e\n\u003cli\u003eWrist pins and rings included\u003c\/li\u003e\n\u003cli\u003eAccumulator groove included\u003c\/li\u003e\n\u003cli\u003eDouble pin oilers\u003c\/li\u003e\n\u003cli\u003ePrices listed are for a full set of four (4) pistons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ca rel=\"lightbox[subcat_9244]\" href=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/669.jpg\"\u003e\u003cimg src=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/669_thumb.jpg\" alt=\"\" width=\"75\"\u003e\u003c\/a\u003e \u003ca rel=\"lightbox[subcat_9244]\" href=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/670.jpg\"\u003e\u003cimg src=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/670_thumb.jpg\" alt=\"\" width=\"75\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFITMENT:Honda S2000 2000-2003 F20C\u003c\/p\u003e","brand":"CP Pistons","offers":[{"title":"Default Title","offer_id":31125885124710,"sku":"SC7166","price":679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cp-875mm-bore-125-compression-pistons-rings-for-00-03-honda-s2000-pistonsrings-cp-pistons-sc7166.jpg?v=1614521576"},{"product_id":"cp-87-0mm-bore-12-5-compression-pistons-rings-for-00-03-honda-s2000","title":"CP 87.0mm Bore 12:5 Compression Pistons \u0026 Rings for 00-03 Honda S2000","description":"\u003cp\u003eWhen building your bottom end, you need a quality piston that can handle boost and maximum horsepower. CP forged pistons feature superb ring seal, higher vacuum, lower blow-by, greater durability and increased horsepower and torque through the power band. Better yet, peak horsepower is retained through the life of the piston rings. This is achieved by lightweight forgings and CP's exclusive machining techniques and processes. CP's commitment to racing is reflected in every piston they produce.\u003c\/p\u003e\n\u003cp\u003eCP is dedicated to superior engineering, utilizing the latest forging techniques and CNC machinery and backing it up with rigorous quality control makes for a top-notch product every time that emphasizes performance and reliability. CP has some of the highest quality control standards in the industry. CP is a division of Pankl Racing Systems, a high-technology racing group supplying engine and suspension components to numerous Formula One, F3000, IRL, CART, World Rally Racing teams and to such elite companies as Ferrari and Porsche. You will not find a finer piston for your 00-09 S2000\u003c\/p\u003e\n\u003cp\u003eCP offers optional coatings to enhance the effectiveness of your pistons. The top coating is designed to reflect heat into the combustion chamber, thereby increasing exhaust gas velocity and greatly improving scavenging potential. The skirt coating offers additional lubricant in times of extreme heat or heavy wear situations. The coating is designed to reduce friction on the skirt by providing a buffer to the cylinder. Coating options are applied to the entire set and add 4-6 weeks to the order time.\u003c\/p\u003e\n\u003cp\u003e Features:\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh strength aluminum forging\u003c\/li\u003e\n\u003cli\u003eLightweight design\u003c\/li\u003e\n\u003cli\u003eCNC machined to 1 gram\u003c\/li\u003e\n\u003cli\u003eWrist pins and rings included\u003c\/li\u003e\n\u003cli\u003eAccumulator groove included\u003c\/li\u003e\n\u003cli\u003eDouble pin oilers\u003c\/li\u003e\n\u003cli\u003ePrices listed are for a full set of four (4) pistons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ca rel=\"lightbox[subcat_9244]\" href=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/669.jpg\"\u003e\u003cimg src=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/669_thumb.jpg\" alt=\"\" width=\"75\"\u003e\u003c\/a\u003e \u003ca rel=\"lightbox[subcat_9244]\" href=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/670.jpg\"\u003e\u003cimg src=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/670_thumb.jpg\" alt=\"\" width=\"75\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFITMENT:Honda S2000 2000-2003 F20C\u003c\/p\u003e","brand":"CP Pistons","offers":[{"title":"Default Title","offer_id":31125885157478,"sku":"SC7165","price":679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cp-870mm-bore-125-compression-pistons-rings-for-00-03-honda-s2000-pistonsrings-cp-pistons-sc7165.jpg?v=1614521577"},{"product_id":"cp-87-5mm-bore-10-1-compression-pistons-rings-for-00-03-honda-s2000","title":"CP 87.5mm Bore 10:1 Compression Pistons \u0026 Rings for 00-03 Honda S2000","description":"\u003cp\u003eWhen building your bottom end, you need a quality piston that can handle boost and maximum horsepower. CP forged pistons feature superb ring seal, higher vacuum, lower blow-by, greater durability and increased horsepower and torque through the power band. Better yet, peak horsepower is retained through the life of the piston rings. This is achieved by lightweight forgings and CP's exclusive machining techniques and processes. CP's commitment to racing is reflected in every piston they produce.\u003c\/p\u003e\n\u003cp\u003eCP is dedicated to superior engineering, utilizing the latest forging techniques and CNC machinery and backing it up with rigorous quality control makes for a top-notch product every time that emphasizes performance and reliability. CP has some of the highest quality control standards in the industry. CP is a division of Pankl Racing Systems, a high-technology racing group supplying engine and suspension components to numerous Formula One, F3000, IRL, CART, World Rally Racing teams and to such elite companies as Ferrari and Porsche. You will not find a finer piston for your 00-09 S2000\u003c\/p\u003e\n\u003cp\u003eCP offers optional coatings to enhance the effectiveness of your pistons. The top coating is designed to reflect heat into the combustion chamber, thereby increasing exhaust gas velocity and greatly improving scavenging potential. The skirt coating offers additional lubricant in times of extreme heat or heavy wear situations. The coating is designed to reduce friction on the skirt by providing a buffer to the cylinder. Coating options are applied to the entire set and add 4-6 weeks to the order time.\u003c\/p\u003e\n\u003cp\u003e Features:\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh strength aluminum forging\u003c\/li\u003e\n\u003cli\u003eLightweight design\u003c\/li\u003e\n\u003cli\u003eCNC machined to 1 gram\u003c\/li\u003e\n\u003cli\u003eWrist pins and rings included\u003c\/li\u003e\n\u003cli\u003eAccumulator groove included\u003c\/li\u003e\n\u003cli\u003eDouble pin oilers\u003c\/li\u003e\n\u003cli\u003ePrices listed are for a full set of four (4) pistons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ca rel=\"lightbox[subcat_9244]\" href=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/669.jpg\"\u003e\u003cimg src=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/669_thumb.jpg\" alt=\"\" width=\"75\"\u003e\u003c\/a\u003e \u003ca rel=\"lightbox[subcat_9244]\" href=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/670.jpg\"\u003e\u003cimg src=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/670_thumb.jpg\" alt=\"\" width=\"75\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFITMENT:Honda S2000 2000-2003 F20C\u003c\/p\u003e","brand":"CP Pistons","offers":[{"title":"Default Title","offer_id":31125885190246,"sku":"SC7066","price":679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cp-875mm-bore-101-compression-pistons-rings-for-00-03-honda-s2000-pistonsrings-cp-pistons-sc7066.jpg?v=1614521578"},{"product_id":"cp-87-0mm-bore-10-1-compression-pistons-rings-for-00-03-honda-s2000","title":"CP 87.0mm Bore 10:1 Compression Pistons \u0026 Rings for 00-03 Honda S2000","description":"\u003cp\u003eWhen building your bottom end, you need a quality piston that can handle boost and maximum horsepower. CP forged pistons feature superb ring seal, higher vacuum, lower blow-by, greater durability and increased horsepower and torque through the power band. Better yet, peak horsepower is retained through the life of the piston rings. This is achieved by lightweight forgings and CP's exclusive machining techniques and processes. CP's commitment to racing is reflected in every piston they produce.\u003c\/p\u003e\n\u003cp\u003eCP is dedicated to superior engineering, utilizing the latest forging techniques and CNC machinery and backing it up with rigorous quality control makes for a top-notch product every time that emphasizes performance and reliability. CP has some of the highest quality control standards in the industry. CP is a division of Pankl Racing Systems, a high-technology racing group supplying engine and suspension components to numerous Formula One, F3000, IRL, CART, World Rally Racing teams and to such elite companies as Ferrari and Porsche. You will not find a finer piston for your 00-09 S2000\u003c\/p\u003e\n\u003cp\u003eCP offers optional coatings to enhance the effectiveness of your pistons. The top coating is designed to reflect heat into the combustion chamber, thereby increasing exhaust gas velocity and greatly improving scavenging potential. The skirt coating offers additional lubricant in times of extreme heat or heavy wear situations. The coating is designed to reduce friction on the skirt by providing a buffer to the cylinder. Coating options are applied to the entire set and add 4-6 weeks to the order time.\u003c\/p\u003e\n\u003cp\u003e Features:\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh strength aluminum forging\u003c\/li\u003e\n\u003cli\u003eLightweight design\u003c\/li\u003e\n\u003cli\u003eCNC machined to 1 gram\u003c\/li\u003e\n\u003cli\u003eWrist pins and rings included\u003c\/li\u003e\n\u003cli\u003eAccumulator groove included\u003c\/li\u003e\n\u003cli\u003eDouble pin oilers\u003c\/li\u003e\n\u003cli\u003ePrices listed are for a full set of four (4) pistons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ca rel=\"lightbox[subcat_9244]\" href=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/669.jpg\"\u003e\u003cimg src=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/669_thumb.jpg\" alt=\"\" width=\"75\"\u003e\u003c\/a\u003e \u003ca rel=\"lightbox[subcat_9244]\" href=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/670.jpg\"\u003e\u003cimg src=\"http:\/\/www.jscspeed.com\/images\/catalog\/secondary\/670_thumb.jpg\" alt=\"\" width=\"75\"\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFITMENT:Honda S2000 2000-2003 F20C\u003c\/p\u003e","brand":"CP Pistons","offers":[{"title":"Default Title","offer_id":31125886271590,"sku":"SC7065","price":679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cp-870mm-bore-101-compression-pistons-rings-for-00-03-honda-s2000-pistonsrings-cp-pistons-sc7065.jpg?v=1614521579"},{"product_id":"cp-89mm-bore-9-6-compression-pistons-rings-honda-s2000-2000-2009","title":"CP 89mm Bore 9:6 Compression Pistons \u0026 Rings Honda S2000 2000-2009","description":"\u003cp\u003eWhen building your bottom end on your Honda S2000, you need a quality piston that can handle boost and maximum horsepower. CP forged pistons feature superb ring seal, higher vacuum, lower blow-by, greater durability and increased horsepower and torque through the power band. Better yet, peak horsepower is retained through the life of the piston rings. This is achieved by lightweight forgings and CP's exclusive machining techniques and processes. CP's commitment to racing is reflected in every piston they produce.\u003c\/p\u003e\n\u003cp\u003eCP offers optional coatings to enhance the effectiveness of your pistons. The top coating is designed to reflect heat into the combustion chamber, thereby increasing exhaust gas velocity and greatly improving scavenging potential. The skirt coating offers additional lubricant in times of extreme heat or heavy wear situations. The coating is designed to reduce friction on the skirt by providing a buffer to the cylinder. Coating options are applied to the entire set and add 4-6 weeks to the order time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecs: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComp Ratio: \u003c\/strong\u003e9.6:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBore: \u003c\/strong\u003e3.504(89.0mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComp Height: \u003c\/strong\u003e1.131\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComp Ratio: \u003c\/strong\u003e9.0:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize: \u003c\/strong\u003e+2.0mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh strength aluminum forging\u003c\/li\u003e\n\u003cli\u003eLightweight design\u003c\/li\u003e\n\u003cli\u003eCNC machined to 1 gram\u003c\/li\u003e\n\u003cli\u003eWrist pins and rings included\u003c\/li\u003e\n\u003cli\u003eAccumulator groove included\u003c\/li\u003e\n\u003cli\u003eDouble pin oilers\u003c\/li\u003e\n\u003cli\u003ePrices listed are for a full set of four (4) pistons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"CP Pistons","offers":[{"title":"Default Title","offer_id":31125887090790,"sku":"SC7063A","price":679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cp-89mm-bore-96-compression-pistons-rings-honda-s2000-2000-2009-pistonsrings-cp-pistons-sc7063a.jpg?v=1614521589"},{"product_id":"cp-87-5mm-bore-9-0-1-compression-pistons-rings-honda-s2000-2000-2009","title":"CP 87.5mm Bore 9.0:1 Compression Pistons \u0026 Rings Honda S2000 2000-2009","description":"\u003cp\u003eWhen building your bottom end, you need a quality piston that can handle boost and maximum horsepower. CP forged pistons feature superb ring seal, higher vacuum, lower blow-by, greater durability and increased horsepower and torque through the power band. Better yet, peak horsepower is retained through the life of the piston rings. This is achieved by lightweight forgings and CP's exclusive machining techniques and processes. CP's commitment to racing is reflected in every piston they produce.\u003c\/p\u003e\n\u003cp\u003eCP is dedicated to superior engineering, utilizing the latest forging techniques and CNC machinery and backing it up with rigorous quality control makes for a top-notch product every time that emphasizes performance and reliability. CP has some of the highest quality control standards in the industry. CP is a division of Pankl Racing Systems, a high-technology racing group supplying engine and suspension components to numerous Formula One, F3000, IRL, CART, World Rally Racing teams and to such elite companies as Ferrari and Porsche. You will not find a finer piston for your 00-09 S2000\u003c\/p\u003e\n\u003cp\u003eCP offers optional coatings to enhance the effectiveness of your pistons. The top coating is designed to reflect heat into the combustion chamber, thereby increasing exhaust gas velocity and greatly improving scavenging potential. The skirt coating offers additional lubricant in times of extreme heat or heavy wear situations. The coating is designed to reduce friction on the skirt by providing a buffer to the cylinder. Coating options are applied to the entire set and add 4-6 weeks to the order time.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh strength aluminum forging\u003c\/li\u003e\n\u003cli\u003eLightweight design\u003c\/li\u003e\n\u003cli\u003eCNC machined to 1 gram\u003c\/li\u003e\n\u003cli\u003eWrist pins and rings included\u003c\/li\u003e\n\u003cli\u003eAccumulator groove included\u003c\/li\u003e\n\u003cli\u003eDouble pin oilers\u003c\/li\u003e\n\u003cli\u003ePrices listed are for a full set of four (4) pistons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecs:\u003c\/p\u003e\n\u003cdiv class=\"col-xs-9\"\u003eCP Piston; For Turbo \/ Supercharger \u0026amp; N2O Applications; Must Sleeve Block\u003c\/div\u003e\n\u003cdiv class=\"col-xs-3 text-right\"\u003e\n\u003cstrong\u003eComp Ratio\u003c\/strong\u003e9.0:1\u003c\/div\u003e\n\u003cdiv class=\"col-xs-3 text-right\"\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e+0.5mm\u003c\/div\u003e\n\u003cdiv class=\"col-xs-3 text-right\"\u003e\n\u003cstrong\u003eComp Height\u003c\/strong\u003e1.131\u003c\/div\u003e\n\u003cdiv class=\"col-xs-3 text-right\"\u003e\n\u003cstrong\u003eBore\u003c\/strong\u003e3.445(87.5mm)\u003c\/div\u003e\n\u003c\/div\u003e","brand":"CP Pistons","offers":[{"title":"Default Title","offer_id":31125887287398,"sku":"SC7061A","price":679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cp-875mm-bore-901-compression-pistons-rings-honda-s2000-2000-2009-pistonsrings-cp-pistons-sc7061a.jpg?v=1614521589"},{"product_id":"cp-87mm-bore-9-6-compression-pistons-rings-honda-s2000-2000-2009","title":"CP 87mm Bore 9:6 Compression Pistons \u0026 Rings Honda S2000 2000-2009","description":"\u003cp\u003eWhen building your bottom end of your Honda S2000, you need a quality piston that can handle boost and maximum horsepower. CP forged pistons feature superb ring seal, higher vacuum, lower blow-by, greater durability and increased horsepower and torque through the power band. Better yet, peak horsepower is retained through the life of the piston rings. This is achieved by lightweight forgings and CP's exclusive machining techniques and processes. CP's commitment to racing is reflected in every piston they produce.\u003c\/p\u003e\n\u003cp\u003eCP offers optional coatings to enhance the effectiveness of your pistons. The top coating is designed to reflect heat into the combustion chamber, thereby increasing exhaust gas velocity and greatly improving scavenging potential. The skirt coating offers additional lubricant in times of extreme heat or heavy wear situations. The coating is designed to reduce friction on the skirt by providing a buffer to the cylinder. Coating options are applied to the entire set and add 4-6 weeks to the order time.\u003c\/p\u003e\n\u003cp\u003eSpecs:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBore: \u003c\/strong\u003e3.425(87.0mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComp Ratio: \u003c\/strong\u003e9.0:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize: \u003c\/strong\u003eSTD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComp Height: \u003c\/strong\u003e1.131\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHigh strength aluminum forging\u003c\/li\u003e\n\u003cli\u003eLightweight design\u003c\/li\u003e\n\u003cli\u003eCNC machined to 1 gram\u003c\/li\u003e\n\u003cli\u003eWrist pins and rings included\u003c\/li\u003e\n\u003cli\u003eAccumulator groove included\u003c\/li\u003e\n\u003cli\u003eDouble pin oilers\u003c\/li\u003e\n\u003cli\u003ePrices listed are for a full set of four (4) pistons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"CP Pistons","offers":[{"title":"Default Title","offer_id":31125887320166,"sku":"SC7060A","price":588.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/cp-87mm-bore-96-compression-pistons-rings-honda-s2000-2000-2009-pistonsrings-cp-pistons-sc7060a.jpg?v=1614521590"},{"product_id":"je-pistons-rings-87-5-bore-84mm-stroke-8-5-1-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003","title":"JE Pistons [00-03 S2000] Pistons \u0026 Rings 87.5mm Bore 84mm Stroke 8.5:1 Compression F20C1 Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged piston and ring kit for the 2000-2003 Honda S2000 F20C1 engine, engineered for extreme applications up to and including professional competition. This kit is built to a 87.5mm bore, 84mm stroke and 8.5:1 compression ratio with a -16.1cc dish volume, using 2618 T6 high tensile forged aluminum for higher compression ratios, high boost or heavy nitrous use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eAsymmetrical FSR forging: asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F)\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation\u003c\/li\u003e\n\u003cli\u003eDished pistons feature Smooth Finished Crown process for excellent flame travel\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.905 x 2.250 straight wall carbon steel wrist pin provided\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eMUST SLEEVE BLOCK\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number and specifications: bore 87.5mm, stroke 84mm, compression ratio 8.5:1, dish volume -16.1cc. If using an OEM connecting rod, the pins must be DLC coated or the connecting rod must be bushed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2000-2003 Honda S2000 F20C1?\u003c\/strong\u003e Yes. This piston kit is built for the F20C1 engine in the 2000-2003 Honda S2000, with a 87.5mm bore and 84mm stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes 4 pistons and 4 rings, with pin fitting and wire locks included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the block need to be sleeved?\u003c\/strong\u003e Yes. JE specifies that the block must be sleeved for this FSR piston kit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172982898790,"sku":"je296911","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-875-bore-84mm-stroke-851-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003-296911-piston-rings-and-clips-je-pistons-je296911.jpg?v=1614530017"},{"product_id":"je-pistons-rings-87-bore-84mm-stroke-9-0-1-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003","title":"JE Pistons [00-03 S2000] Pistons \u0026 Rings 87mm Bore 84mm Stroke 9.0:1 Compression F20C1 Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged piston and ring kit for the 2000-2003 Honda S2000 F20C1 engine, engineered for extreme applications up to and including professional competition. This kit is built to a 87mm bore, 84mm stroke and 9.0:1 compression ratio, using 2618 T6 high tensile forged aluminum for higher compression ratios, high boost or heavy nitrous use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eAsymmetrical FSR forging: asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F)\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation\u003c\/li\u003e\n\u003cli\u003eDished pistons feature Smooth Finished Crown process for excellent flame travel\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.905 x 2.250 straight wall carbon steel wrist pin provided\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eMUST SLEEVE BLOCK\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSpecifications: bore 87mm, stroke 84mm, compression ratio 9.0:1. Part number 296908. If using an OEM connecting rod, the pins must be DLC coated or the connecting rod must be bushed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2000-2003 Honda S2000 F20C1?\u003c\/strong\u003e Yes. This piston kit is built for the F20C1 engine in the 2000-2003 Honda S2000, with a 87mm bore and 84mm stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes 4 pistons and 4 rings, with pin fitting and wire locks included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the block need to be sleeved?\u003c\/strong\u003e Yes. JE specifies that the block must be sleeved for this piston kit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172982931558,"sku":"je296908","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-87-bore-84mm-stroke-901-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003-296908-piston-rings-and-clips-je-pistons-je296908.jpg?v=1614530018"},{"product_id":"je-pistons-rings-87-bore-84mm-stroke-8-5-1-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003","title":"JE Pistons [00-03 S2000] Pistons \u0026 Rings 87mm Bore 84mm Stroke 8.5:1 Compression F20C1 Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged piston and ring kit for the 2000-2003 Honda S2000 F20C1 engine, engineered for extreme applications up to and including professional competition. This kit is built to a 87mm bore, 84mm stroke and 8.5:1 compression ratio with a -15.4cc dish volume, using 2618 T6 high tensile forged aluminum for higher compression ratios, high boost or heavy nitrous use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eAsymmetrical FSR forging: asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F)\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation\u003c\/li\u003e\n\u003cli\u003eDished pistons feature Smooth Finished Crown process for excellent flame travel\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.905 x 2.250 straight wall carbon steel wrist pin provided\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eMUST SLEEVE BLOCK\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSpecifications: bore 87mm, stroke 84mm, compression ratio 8.5:1 with a -15.4cc dish volume. Part number 296910. If using an OEM connecting rod, the pins must be DLC coated or the connecting rod must be bushed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2000-2003 Honda S2000 F20C1?\u003c\/strong\u003e Yes. This piston kit is built for the F20C1 engine in the 2000-2003 Honda S2000, with a 87mm bore and 84mm stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes 4 pistons and 4 rings, with pin fitting and wire locks included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the block need to be sleeved?\u003c\/strong\u003e Yes. JE specifies that the block must be sleeved for this piston kit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172982997094,"sku":"je296910","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-87-bore-84mm-stroke-851-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003-296910-piston-rings-and-clips-je-pistons-je296910.jpg?v=1614530019"},{"product_id":"je-pistons-rings-87-bore-84mm-stroke-11-5-1-comp-honda-s2000-f20c1-traditional-2000-2003","title":"JE Pistons [00-03 S2000] Pistons \u0026 Rings 87mm Bore 84mm Stroke 11.5:1 Compression F20C1 Traditional","description":"\u003cp\u003eJE Pistons forged piston and ring kit for the 2000-2003 Honda S2000 F20C1 engine, engineered for extreme applications up to and including professional competition. This kit is built to a 87mm bore, 84mm stroke and 11.5:1 compression ratio with a 5.5cc dome volume, using 2618 T6 high tensile forged aluminum for higher compression ratios, high boost or heavy nitrous use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eTraditional Full Round series forging\u003c\/li\u003e\n\u003cli\u003eDome features smooth flowing radii for excellent flame travel\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.905 x 2.250 straight wall carbon steel wrist pin provided\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eMUST SLEEVE BLOCK\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSpecifications: bore 87mm, stroke 84mm, compression ratio 11.5:1 with a 5.5cc dome volume. Part number 252607. If using an OEM connecting rod, the pins must be DLC coated or the connecting rod must be bushed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2000-2003 Honda S2000 F20C1?\u003c\/strong\u003e Yes. This piston kit is built for the F20C1 engine in the 2000-2003 Honda S2000, with a 87mm bore and 84mm stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes 4 pistons and 4 rings, with pin fitting and wire locks included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the block need to be sleeved?\u003c\/strong\u003e Yes. JE specifies that the block must be sleeved for this piston kit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172983423078,"sku":"je252607","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-87-bore-84mm-stroke-1151-comp-honda-s2000-f20c1-traditional-2000-2003-252607-piston-rings-and-clips-je-pistons-je252607.jpg?v=1614530024"},{"product_id":"je-pistons-rings-87-bore-84mm-stroke-9-0-1-comp-honda-s2000-f20c1-traditional-2000-2003","title":"JE Pistons [00-03 S2000] Pistons \u0026 Rings 87mm Bore 84mm Stroke 9.0:1 Compression F20C1 Traditional","description":"\u003cp\u003eJE Pistons forged piston and ring kit for the 2000-2003 Honda S2000 F20C1 engine, engineered for extreme applications up to and including professional competition. This kit is built to a 87mm bore, 84mm stroke and 9.0:1 compression ratio, using 2618 T6 high tensile forged aluminum for higher compression ratios, high boost or heavy nitrous use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eTraditional Full Round series forging\u003c\/li\u003e\n\u003cli\u003eDome and dishes feature smooth flowing radii for excellent flame travel\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.905 x 2.250 straight wall carbon steel wrist pin provided\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eMUST SLEEVE BLOCK\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSpecifications: bore 87mm, stroke 84mm, compression ratio 9.0:1. Part number 252606. If using an OEM connecting rod, the pins must be DLC coated or the connecting rod must be bushed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2000-2003 Honda S2000 F20C1?\u003c\/strong\u003e Yes. This piston kit is built for the F20C1 engine in the 2000-2003 Honda S2000, with a 87mm bore and 84mm stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes 4 pistons and 4 rings, with pin fitting and wire locks included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the block need to be sleeved?\u003c\/strong\u003e Yes. JE specifies that the block must be sleeved for this piston kit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172983521382,"sku":"je252606","price":612.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-87-bore-84mm-stroke-901-comp-honda-s2000-f20c1-traditional-2000-2003-252606-piston-rings-and-clips-je-pistons-je252606.jpg?v=1614530028"},{"product_id":"je-pistons-rings-90-bore-84mm-stroke-9-0-1-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003","title":"JE Pistons [00-03 S2000] Pistons \u0026 Rings 90mm Bore 84mm Stroke 9.0:1 Compression F20C1 Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged piston and ring kit for the 2000-2003 Honda S2000 F20C1 engine, engineered for extreme applications up to and including professional competition. This kit is built to a 90mm bore, 84mm stroke and 9.0:1 compression ratio with a -14.6cc dish volume, using 2618 T6 high tensile forged aluminum for higher compression ratios, high boost or heavy nitrous use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eAsymmetrical FSR forging: asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F)\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation\u003c\/li\u003e\n\u003cli\u003eDished pistons feature Smooth Finished Crown process for excellent flame travel\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.905 x 2.250 straight wall carbon steel wrist pin provided\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eMUST SLEEVE BLOCK\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSpecifications: bore 90mm, stroke 84mm, compression ratio 9.0:1 with a -14.6cc dish volume. Part number 317752. If using an OEM connecting rod, the pins must be DLC coated or the connecting rod must be bushed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2000-2003 Honda S2000 F20C1?\u003c\/strong\u003e Yes. This piston kit is built for the F20C1 engine in the 2000-2003 Honda S2000, with a 90mm bore and 84mm stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes 4 pistons and 4 rings, with pin fitting and wire locks included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the block need to be sleeved?\u003c\/strong\u003e Yes. JE specifies that the block must be sleeved for this piston kit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172983554150,"sku":"je317752","price":560.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-90-bore-84mm-stroke-901-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003-317752-piston-rings-and-clips-je-pistons-je317752.jpg?v=1614530029"},{"product_id":"je-pistons-rings-90-bore-84mm-stroke-8-5-1-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003","title":"JE Pistons [00-03 S2000] Pistons \u0026 Rings 90mm Bore 84mm Stroke 8.5:1 Compression F20C1 Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged piston and ring kit for the 2000-2003 Honda S2000 F20C1 engine, engineered for extreme applications up to and including professional competition. This kit is built to a 90mm bore, 84mm stroke and 8.5:1 compression ratio with a -20cc dish volume, using 2618 T6 high tensile forged aluminum for higher compression ratios, high boost or heavy nitrous use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eAsymmetrical FSR forging: asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F)\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation\u003c\/li\u003e\n\u003cli\u003eDished pistons feature Smooth Finished Crown process for excellent flame travel\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.905 x 2.250 straight wall carbon steel wrist pin provided\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eMUST SLEEVE BLOCK\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSpecifications: bore 90mm, stroke 84mm, compression ratio 8.5:1 with a -20cc dish volume. Part number 317756. If using an OEM connecting rod, the pins must be DLC coated or the connecting rod must be bushed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2000-2003 Honda S2000 F20C1?\u003c\/strong\u003e Yes. This piston kit is built for the F20C1 engine in the 2000-2003 Honda S2000, with a 90mm bore and 84mm stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes 4 pistons and 4 rings, with pin fitting and wire locks included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the block need to be sleeved?\u003c\/strong\u003e Yes. JE specifies that the block must be sleeved for this piston kit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172983586918,"sku":"je317756","price":665.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-90-bore-84mm-stroke-851-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003-317756-piston-rings-and-clips-je-pistons-je317756.jpg?v=1614530030"},{"product_id":"je-pistons-rings-88-bore-84mm-stroke-9-0-1-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003","title":"JE Pistons [00-03 S2000] Pistons \u0026 Rings 88mm Bore 84mm Stroke 9.0:1 Compression F20C Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged piston and ring kit for the 2000-2003 Honda S2000 F20C engine, engineered for extreme applications up to and including professional competition. This kit is built to a 88mm bore, 84mm stroke and 9.0:1 compression ratio with a -11.8cc dish volume, using 2618 T6 high tensile forged aluminum for higher compression ratios, high boost or heavy nitrous use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eAsymmetrical FSR forging: asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F)\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation\u003c\/li\u003e\n\u003cli\u003eDished pistons feature Smooth Finished Crown process for excellent flame travel\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.905 x 2.250 straight wall carbon steel wrist pin provided\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eMUST SLEEVE BLOCK\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number and specifications: part number 317750, bore 88mm, stroke 84mm, compression ratio 9.0:1, dish volume -11.8cc. If using an OEM connecting rod, the pins must be DLC coated or the connecting rod must be bushed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2000-2003 Honda S2000 F20C?\u003c\/strong\u003e Yes. This piston kit is built for the F20C engine in the 2000-2003 Honda S2000, with a 88mm bore and 84mm stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes 4 pistons and 4 rings, with pin fitting and wire locks included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the block need to be sleeved?\u003c\/strong\u003e Yes. JE specifies that the block must be sleeved for this FSR piston kit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172983619686,"sku":"je317750","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-88-bore-84mm-stroke-901-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003-317750-piston-rings-and-clips-je-pistons-je317750.jpg?v=1614530030"},{"product_id":"je-pistons-rings-89-bore-84mm-stroke-8-5-1-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003","title":"JE Pistons [00-03 S2000] Pistons \u0026 Rings 89mm Bore 84mm Stroke 8.5:1 Compression F20C Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged piston and ring kit for the 2000-2003 Honda S2000 F20C engine, engineered for extreme applications up to and including professional competition. This kit is built to a 89mm bore, 84mm stroke and 8.5:1 compression ratio with a -18.4cc dish volume, using 2618 T6 high tensile forged aluminum for higher compression ratios, high boost or heavy nitrous use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eAsymmetrical FSR forging: asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F)\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation\u003c\/li\u003e\n\u003cli\u003eDished pistons feature Smooth Finished Crown process for excellent flame travel\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.905 x 2.250 straight wall carbon steel wrist pin provided\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eMUST SLEEVE BLOCK\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number and specifications: part number 317755, bore 89mm, stroke 84mm, compression ratio 8.5:1, dish volume -18.4cc. If using an OEM connecting rod, the pins must be DLC coated or the connecting rod must be bushed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2000-2003 Honda S2000 F20C?\u003c\/strong\u003e Yes. This piston kit is built for the F20C engine in the 2000-2003 Honda S2000, with a 89mm bore and 84mm stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes 4 pistons and 4 rings, with pin fitting and wire locks included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the block need to be sleeved?\u003c\/strong\u003e Yes. JE specifies that the block must be sleeved for this FSR piston kit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172983816294,"sku":"je317755","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-89-bore-84mm-stroke-851-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003-317755-piston-rings-and-clips-je-pistons-je317755.jpg?v=1614530031"},{"product_id":"je-pistons-rings-89-bore-84mm-stroke-9-0-1-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003","title":"JE Pistons [00-03 S2000] Pistons \u0026 Rings 89mm Bore 84mm Stroke 9.0:1 Compression F20C Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged piston and ring kit for the 2000-2003 Honda S2000 F20C engine, engineered for extreme applications up to and including professional competition. This kit is built to a 89mm bore, 84mm stroke and 9.0:1 compression ratio with a -13.2cc dish volume, using 2618 T6 high tensile forged aluminum for higher compression ratios, high boost or heavy nitrous use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eAsymmetrical FSR forging: asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F)\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation\u003c\/li\u003e\n\u003cli\u003eDished pistons feature Smooth Finished Crown process for excellent flame travel\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.905 x 2.250 straight wall carbon steel wrist pin provided\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eMUST SLEEVE BLOCK\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number and specifications: part number 317751, bore 89mm, stroke 84mm, compression ratio 9.0:1, dish volume -13.2cc. If using an OEM connecting rod, the pins must be DLC coated or the connecting rod must be bushed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2000-2003 Honda S2000 F20C?\u003c\/strong\u003e Yes. This piston kit is built for the F20C engine in the 2000-2003 Honda S2000, with a 89mm bore and 84mm stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes 4 pistons and 4 rings, with pin fitting and wire locks included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the block need to be sleeved?\u003c\/strong\u003e Yes. JE specifies that the block must be sleeved for this FSR piston kit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172983849062,"sku":"je317751","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-89-bore-84mm-stroke-901-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003-317751-piston-rings-and-clips-je-pistons-je317751.jpg?v=1614530032"},{"product_id":"je-pistons-rings-88-bore-84mm-stroke-8-5-1-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003","title":"JE Pistons [00-03 S2000] Pistons \u0026 Rings 88mm Bore 84mm Stroke 8.5:1 Compression F20C Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged piston and ring kit for the 2000-2003 Honda S2000 F20C engine, engineered for extreme applications up to and including professional competition. This kit is built to a 88mm bore, 84mm stroke and 8.5:1 compression ratio with a -16.9cc dish volume, using 2618 T6 high tensile forged aluminum for higher compression ratios, high boost or heavy nitrous use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eAsymmetrical FSR forging: asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F)\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation\u003c\/li\u003e\n\u003cli\u003eDished pistons feature Smooth Finished Crown process for excellent flame travel\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.905 x 2.250 straight wall carbon steel wrist pin provided\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eMUST SLEEVE BLOCK\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number and specifications: part number 317754, bore 88mm, stroke 84mm, compression ratio 8.5:1, dish volume -16.9cc. If using an OEM connecting rod, the pins must be DLC coated or the connecting rod must be bushed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2000-2003 Honda S2000 F20C?\u003c\/strong\u003e Yes. This piston kit is built for the F20C engine in the 2000-2003 Honda S2000, with a 88mm bore and 84mm stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes 4 pistons and 4 rings, with pin fitting and wire locks included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the block need to be sleeved?\u003c\/strong\u003e Yes. JE specifies that the block must be sleeved for this FSR piston kit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172983914598,"sku":"je317754","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-88-bore-84mm-stroke-851-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003-317754-piston-rings-and-clips-je-pistons-je317754.jpg?v=1614530033"},{"product_id":"je-pistons-rings-87-5-bore-84mm-stroke-9-0-1-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003","title":"JE Pistons [00-03 S2000] Pistons \u0026 Rings 87.5mm Bore 84mm Stroke 9.0:1 Compression F20C Asymmetrical FSR","description":"\u003cp\u003eJE Pistons forged piston and ring kit for the 2000-2003 Honda S2000 F20C engine, engineered for extreme applications up to and including professional competition. This kit is built to a 87.5mm bore, 84mm stroke and 9.0:1 compression ratio with a -11cc dish volume, using 2618 T6 high tensile forged aluminum for higher compression ratios, high boost or heavy nitrous use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCrown requires no deburring or preparation\u003c\/li\u003e\n\u003cli\u003e2618 T6 high tensile forged aluminum\u003c\/li\u003e\n\u003cli\u003eAsymmetrical FSR forging: asymmetrical skirt technology reduces friction and mass while providing a more rigid and durable platform (Skirt Style F)\u003c\/li\u003e\n\u003cli\u003eFSR pistons include offset pins for quiet operation\u003c\/li\u003e\n\u003cli\u003eDished pistons feature Smooth Finished Crown process for excellent flame travel\u003c\/li\u003e\n\u003cli\u003e1.0 x 1.2 x 2.8mm ring widths\u003c\/li\u003e\n\u003cli\u003e.905 x 2.250 straight wall carbon steel wrist pin provided\u003c\/li\u003e\n\u003cli\u003ePin fitting, rings and wire locks included\u003c\/li\u003e\n\u003cli\u003eMUST SLEEVE BLOCK\u003c\/li\u003e\n\u003cli\u003eIncludes 4 pistons and 4 rings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number and specifications: part number 296909, bore 87.5mm, stroke 84mm, compression ratio 9.0:1, dish volume -11cc. If using an OEM connecting rod, the pins must be DLC coated or the connecting rod must be bushed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit my 2000-2003 Honda S2000 F20C?\u003c\/strong\u003e Yes. This piston kit is built for the F20C engine in the 2000-2003 Honda S2000, with a 87.5mm bore and 84mm stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e The kit includes 4 pistons and 4 rings, with pin fitting and wire locks included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes the block need to be sleeved?\u003c\/strong\u003e Yes. JE specifies that the block must be sleeved for this FSR piston kit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"JE Pistons","offers":[{"title":"Default Title","offer_id":31172983947366,"sku":"je296909","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/je-pistons-rings-875-bore-84mm-stroke-901-comp-honda-s2000-f20c1-asymmetrical-fsr-2000-2003-296909-piston-rings-and-clips-je-pistons-je296909.jpg?v=1614530035"},{"product_id":"wiseco-piston-shelf-stock-honda-s2000-10cc-dish-87mm-bore","title":"Wiseco [Honda S2000] Professional Piston - 87.00mm Bore, 28.98mm CH, -10.00cc","description":"\u003cp\u003eThe Wiseco Professional Piston for the Honda S2000 is a forged racing piston for engine builds using a 87.00 mm bore. Professional Series forged racing pistons from Wiseco are no-expense-spared pistons designed for serious racers and builders, with custom-level performance and durability features and premium rings, built for heavy to severe duty race builds.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePart number: 6632M87\u003c\/li\u003e\n\u003cli\u003eEngine: Honda S2000\u003c\/li\u003e\n\u003cli\u003eBore: 87.00 mm\u003c\/li\u003e\n\u003cli\u003eCompression height: 28.98mm\u003c\/li\u003e\n\u003cli\u003eDome\/dish volume: -10.00 cc\u003c\/li\u003e\n\u003cli\u003eQuantity: 1 piston\u003c\/li\u003e\n\u003cli\u003eMaterial: 2618 forged aluminum\u003c\/li\u003e\n\u003cli\u003eStroke: 84 \/ 90.75\u003c\/li\u003e\n\u003cli\u003eRod: 153 \/ 149.65\u003c\/li\u003e\n\u003cli\u003eComp Ratio: 9.0:1 \/ 8.5:1\u003c\/li\u003e\n\u003cli\u003eGram Weight: 302\u003c\/li\u003e\n\u003cli\u003eEngineered, forged, and machined in the USA from 2618 aluminum for improved tensile strength\u003c\/li\u003e\n\u003cli\u003eArmorGlide skirt coating: seizure resistant, friction reduction, and quieter operation\u003c\/li\u003e\n\u003cli\u003eFully machined crown features\u003c\/li\u003e\n\u003cli\u003ePrecision ring grooves, anti-detonation groove, and additional ring seal improving features\u003c\/li\u003e\n\u003cli\u003eForced pin oiling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit my Honda S2000 engine?\u003c\/strong\u003e\u003cbr\u003eThis Wiseco professional piston, part number 6632M87, is made for the Honda S2000 engine with a 87.00 mm bore. Verify the bore size and compression height against your engine build before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is included in the box?\u003c\/strong\u003e\u003cbr\u003eOne piston. Quantity: 1 piston. Part number: 6632M87.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat are the bore, compression height, and dome\/dish volume?\u003c\/strong\u003e\u003cbr\u003eBore: 87.00 mm. Compression height: 28.98mm. Dome\/dish volume: -10.00 cc.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat material is this piston made from?\u003c\/strong\u003e\u003cbr\u003e2618 forged aluminum, engineered, forged, and machined in the USA. The skirt has an ArmorGlide coating that is seizure resistant, reduces friction, and allows quieter operation.\u003c\/p\u003e","brand":"Wiseco","offers":[{"title":"Default Title","offer_id":31902174871654,"sku":"wis6632M87","price":217.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/wiseco-piston-shelf-stock-honda-s2000-10cc-dish-87mm-bore-engine-internals-assemblies-wiseco-wis-6632m87.jpg?v=1614551531"},{"product_id":"wiseco-8-5-1-forged-pistons-honda-s2000-f20c-f22c","title":"Wiseco Honda S2000 F20C F22C 8.5:1 Forged Pistons","description":"\u003cp\u003eWiseco 8.5:1 Forged Pistons for the Honda S2000 F20C and F22C engines are forged pistons with an 8.5:1 compression ratio, sold with a ring set. All Wiseco pistons are sold with a ring set; rings are available to order for rebuilding or refreshing the engine.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePart number: K632M87\u003c\/li\u003e\n\u003cli\u003eEngine: Honda F20C \/ F22C (S2000)\u003c\/li\u003e\n\u003cli\u003eBore: 87.00 mm\u003c\/li\u003e\n\u003cli\u003eCompression Ratio: 8.5:1\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eValve pocket designs that allow maximum flow around valve, also allowing oversized valves and high lift cams to be utilized\u003c\/li\u003e\n\u003cli\u003ePiston crown shapes designed to promote maximum intake charge efficiency through scavenging mixture cross flow during intake and exhaust valve overlap\u003c\/li\u003e\n\u003cli\u003ePistons designed to optimize squish or quench during the compression combustion cycle, resulting in resistance to detonation and pre-ignition\u003c\/li\u003e\n\u003cli\u003eComplex piston skirt profiles that reduce power robbing friction, yet promote stability in bore for optimum ring seal\u003c\/li\u003e\n\u003cli\u003ePrecision machined ring grooves providing maximum ring seal and minimizing blow-by and oil consumption\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eQ: What engine does this Wiseco piston set fit?\u003c\/strong\u003e\u003cbr\u003eA: This piston set is for the Honda S2000 F20C and F22C engines. Confirm your engine and bore size before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is the compression ratio and bore?\u003c\/strong\u003e\u003cbr\u003eA: The compression ratio is 8.5:1 and the bore is 87.00 mm.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included with these pistons?\u003c\/strong\u003e\u003cbr\u003eA: All Wiseco pistons are sold with a ring set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eQ: Do these pistons require aftermarket sleeves?\u003c\/strong\u003e\u003cbr\u003eA: Yes. For FRM cylinders, aftermarket sleeves are required.\u003c\/p\u003e","brand":"Wiseco","offers":[{"title":"Default Title","offer_id":31902196007014,"sku":"wisK632M87","price":732.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/products\/wiseco-851-forged-pistons-honda-s2000-f20c-f22c-engine-internals-assemblies-wiseco-wis-k632m87.jpg?v=1614551814"},{"product_id":"alcon-00-05-honda-s2000-4-piston-332x32mm-front-race-kit-anodized","title":"Alcon 00-05 Honda S2000 4 Piston 332x32mm Front Race Kit - Anodized","description":"\u003cp\u003eAlcon 00-05 Honda S2000 4 Piston 332x32mm Front Race Kit - Anodized\u003c\/p\u003e\n\n\u003cp\u003eAir Freight Prohibited: false\n\u003cbr\u003eNot Carb Approved: false\n\u003cbr\u003eCarb Acknowledgement Required: false\n\u003cbr\u003eLtl Freight Required: false\n\u003cbr\u003eProp 65: Unknown\n\u003cbr\u003ePart Type: automotive\n\u003cbr\u003eEpa: N\/A\n\u003cbr\u003eNumber Of Boxes: 2\n\u003cbr\u003eRegular Stock: t\u003c\/p\u003e","brand":"Alcon","offers":[{"title":"Default Title","offer_id":43383762583654,"sku":"alcBRK.200610","price":4600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/alcon-00-05-honda-s2000-4-piston-332x32mm-front-race-kit-anodized-3951123.jpg?v=1795091119"},{"product_id":"alcon-00-09-honda-s2000-wisefab-2-piston-rear-race-kit-anodized","title":"Alcon 00-09 Honda S2000 Wisefab 2 Piston Rear Race Kit - Anodized","description":"\u003cp\u003eAlcon 00-09 Honda S2000 Wisefab 2 Piston Rear Race Kit - Anodized\u003c\/p\u003e\n\n\u003cp\u003eAir Freight Prohibited: false\n\u003cbr\u003eNot Carb Approved: false\n\u003cbr\u003eCarb Acknowledgement Required: false\n\u003cbr\u003eLtl Freight Required: false\n\u003cbr\u003eProp 65: Unknown\n\u003cbr\u003ePart Type: automotive\n\u003cbr\u003eEpa: N\/A\n\u003cbr\u003eNumber Of Boxes: 3\n\u003cbr\u003eRegular Stock: false\u003c\/p\u003e","brand":"Alcon","offers":[{"title":"Default Title","offer_id":43383762649190,"sku":"alcBRK.200618","price":4600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0075\/8703\/7237\/files\/alcon-00-09-honda-s2000-wisefab-2-piston-rear-race-kit-anodized-5253169.jpg?v=1795091125"}],"url":"https:\/\/jdmuscleusa.com\/collections\/2000-2003-honda-s2000-pistons-and-sleeves.oembed","provider":"JDMuscle","version":"1.0","type":"link"}